SKJ TAQ 1 True Wireless Earbuds

Specifications

Diagrammatic Sketch:

The SKJ TAQ 1 earbuds come with a charging case. The earbuds themselves are depicted with touch areas and ear caps. The charging case features a Type-C interface and indicator lights.

Package List

• Bluetooth headset (2PCS)
• Earphone Charging box
• Type-c charging cable
• User's manual
• Gift package
• Earphone caps (3 pairs)

Operation Instructions

1. Power on

   Auto power on (first usage): Open the charging case lid. Take out two earbuds; they will auto-pair. Wait for phone Bluetooth connection.

   Manually power on: With earbuds off and out of the charging case, long-press the left or right earbud for 3 seconds.

2. Power off

   Earbuds auto power off: Remove earbuds from ears. Place both earbuds into the charging case to auto power off and charge.

   Manually power off: When earbuds are on and connected, click any earbud for 5 seconds to power off.

3. Bluetooth connection

   1. Take out two earbuds from the charging case.
   2. Search for Bluetooth name on your phone.
   3. Find and click the Bluetooth name 'TAQ1' to connect.

   Note: Earbuds will auto-connect to the last paired device in 2-4 seconds. Earbuds will auto power off if not connected.

4. Earbuds operation

   • Language tone switching: Default is Chinese. Double-click to switch language tone before pairing.
   • Answer/Hang up call: Single-click any earbud to answer/end a call. Long-press any earbud for 1.5 seconds to reject a call.
   • Pause/play music: Single-click any earbud to pause or play music.
   • Previous/next song: Double-click the right earbud to play the next song. (Note: The manual states single-click left earbud for pause/play, which is redundant with point C. Assuming double-click left is for previous song, though not explicitly stated.)
   • Volume adjustment: Triple-click the left earbud to increase volume. Triple-click the right earbud to decrease volume.
   • Wake up voice assistant: Long-press any earbud for 1.5 seconds to wake up Siri (for iOS phones with permission).
   • Noise cancellation:
     • Transparency mode: Long press left/right earbud for 2 seconds.
     • ANC mode: Long press left/right earbud for 2 seconds to switch from transparency mode to noise cancellation.
     • ANC off: Long press left/right earbud for 2 seconds to turn off ANC mode.

Indicator Status

Button functions:

1. Short press the charging case button: Orange light on for 1 second if power is less than 10%. Green light on for 1 second if power is more than 10%. Green light stays on when the charging case is fully charged.
2. Manually pairing: Open the charging case lid and long-press the button until the green light stays on for 1 second; earbuds pairing is successful.

Precautions

• Store earbuds in a dry and ventilated environment, avoiding contact with oil, water, and steam to maintain performance.
• Avoid cleaning the product with harsh organic solvents or items containing such ingredients.
• Use earbuds according to specifications and consider the environment. For a smooth connection, keep the distance between the phone and headset within 10 meters.
• If earbuds cannot connect or communication is unstable, do not disassemble them or accessories without authorization, as this will void the warranty.
• To charge the headset, use a standard car charger or a charger that meets the company's specified requirements.
• Ensure the headset is fully charged for normal use.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement.