AccessoriesSearch Shure Products and Solutions - Shure Europe
User Manual for Shure models including: SE315, SE425, SE535, Sound Isolating Earphones
SE425-CL-EFS User Guide (PDF) Shure Shure,SE425-CL,Professional,Sound,Isolating,Earphones,with,Dual,High,Definition,MicroDrivers,,Secure,in-Ear,Fit,-,Clear,B0B27SXFS6,B09LB77CL1,B08BTP5N5H,B08BTK7RC4,B003NSBKSC,B003NSBKSM,B09LBFCC2Q
File Info : application/pdf, 8 Pages, 427.25KB
DocumentDocumentSE315 SE425 SE535 Sound IsolatingTM Earphones The Shure high-definition sound isolating earphones, SE315, SE425, and SE535, user guide. Version: 3.1 (2022-C) Table of Contents SE315 SE425 SE535 Sound IsolatingTM Earphones 3 Sound IsolatingTM Earphones 3 Detachable Cable 3 Wearing the Earphones 3 Inserting the Earphones 4 Changing Sleeves 4 Removing the Earphones Choosing a Sleeve Cleaning the Earphone Nozzle Maintenance and Cleaning Specifications Accessories Certifications Shure Incorporated 5 5 6 6 6 7 8 2/8 Shure Incorporated SE315 SE425 SE535 Sound IsolatingTM Earphones Sound IsolatingTM Earphones Shure Sound IsolatingTM Earphones, built with balanced armature speakers, deliver a detailed soundstage free from outside noise. The powerful and stylish Shure SE earphones come with a detachable cable, adapters, a durable carrying case, and in terchangeable Sound Isolating sleeves for a comfortable and personalized fit. Detachable Cable You may need to detach the cable from the earphones to attach optional components or to replace the cable if it becomes damaged. To prevent accidental separation, the connector has a snug fit. Take special care to prevent damage to the earphone and connector. · Do not use pliers or other tools. · Grasp the connector and the earphone as close as possible to where they join. · Pull straight apart--do not twist. Cable is a snap fit, not threaded. Note: If you pull at an angle, the connector will not detach. · Do not pull on the cable or put any pressure on the earphone nozzle. · Listen for a click when connecting. · When reattaching the cable, match the "L" and "R" markings. For clear cables and earphones, match the color dots (Red=Right, Blue=Left). 3/8 Wearing the Earphones The following are some suggested ways of wearing the earphones. Shure Incorporated Wear the cable over the ear and secure it behind the head to help keep the earphones in place during physical activity. Tighten the cable and take up slack by raising the cable cinch. Inserting the Earphones Insert the earphones so they form a tight seal. The fit of the earphone can greatly affect sound quality. Important: If there seems to be a lack of low frequency response (bass), this means that the earphone sleeve is not forming a tight seal. Gently push the ear phone deeper into the ear canal or try a different sleeve. Warning: Do not push the earphone sleeve beyond the ear canal opening. 4/8 Changing Sleeves · Twist and pull to remove the sleeve from the nozzle. · Slide on a new sleeve so that it completely covers the barb and the nozzle. Shure Incorporated Caution: If the barb or any of the nozzle is exposed, the sleeve is not properly installed. Replace sleeves if they do not tightly grip the nozzle. To ensure proper fit and performance, use only sleeves supplied by Shure (unless using custom molded sleeves). Removing the Earphones Grasp the body of earphone and gently twist to remove. Note: Do not pull on cable to remove earphone. 5/8 Shure Incorporated Choosing a Sleeve Select an earphone sleeve that provides the best fit and sound isolation. It should be easy to insert, fit comfortably, and easy to remove. Soft Flex Sleeves: In small, medium, and large sizes. Made from pliable rubber. Soft Foam Sleeves: Compress the foam sleeve between your fingers and insert into the ear canal. Hold in place for about ten seconds while the foam expands. Triple-Flange Sleeves: If desired, use scissors to trim the stem on the sleeve. Cleaning the Earphone Nozzle If you notice a change in sound quality, remove the sleeve and check the nozzle of your earphone. If nozzle is blocked, clear obstruction by using wire loop end of cleaning tool. If no obstruction is found or if sound quality does not improve, replace the sleeve with a new sleeve. Caution: When cleaning, do not force any object through the earphone nozzle! This will damage the earphone sound filter. Warning: The cleaning tool is only to be used to clean the earphones. Any other use, such as using the tool to clean ears or foam sleeve, could result in injury. The cable connectors to the earphones may collect debris or other deposits that can affect audio quality. If this happens, disconnect the cables and clean them using a dry cotton swab. Maintenance and Cleaning Careful maintenance ensures a tight seal between the sleeve and nozzle, improving sound quality and product safety. · Keep the earphones and sleeves as clean and dry as possible. · To clean sleeves, remove them from earphones, gently rinse in warm water and air dry. Foam sleeves require a longer drying time. Inspect for damage and replace if necessary. Ear sleeves must be completely dry before reusing. · Wipe the earphones and sleeves with mild antiseptic to avoid infections. Do not use alcohol-based disinfectants. · Do not expose earphones to extreme temperatures. · Replace sleeves if they do not fit properly. · Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury and/or product failure. 6/8 Specifications Transducer Type SE535/535LTD Red Triple balanced-armature drivers SE425 Dual balanced-armature drivers SE315 Single High-Definition MicroDriver Sensitivity at 1 kHz SE535/535LTD Red SE425 SE315 119 dBSPL/MW 109 dBSPL/MW 116 dBSPL/MW Impedance at 1 kHz SE535/535LTD Red SE425 SE315 36 22 27 Frequency Range SE535 SE535LTD Red SE425 SE315 18 Hz19 kHz 18 Hz19 .5 kHz 20 Hz19 kHz 22 Hz18 .5 kHz Input Connector Goldplated 3.5 mm (1/8") stereo mini jack plug with 6.35 mm (1/4") threaded adapter Net Weight 30 g (1 oz.) Operating Temperature -18°C to 57°C (0°F to 135°F) Storage Temperature -29°C to 74°C (-20°F to 165°F) Accessories · Earphone Sleeves · Replacement Cables Shure Incorporated 7/8 · Carrying Cases · Music Phone Accessory Cables · Volume Control · Adapters For information about earphone accessories and other Shure products visit: http://www.shure.com/en-US/products/accessories Shure Incorporated Certifications This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance Authorized European representative: Shure Europe GmbH Headquarters Europe, Middle East & Africa Department: EMEA Approval Jakob-Dieffenbacher-Str. 12 75031 Eppingen, Germany Phone: +49-7262-92 49 0 Fax: +49-7262-92 49 11 4 Email: info@shure.de 8/8