User Manual for Shenzhen ke kaika models including: 2BK48-GOX, 2BK48GOX, 2BK48-GOX Bluetooth Speaker Phone Stand, 2BK48-GOX, Bluetooth Speaker Phone Stand, Speaker Phone Stand, Phone Stand
Shenzhen ke kaika technology co. LTD GOX 2BK48-GOX 2BK48GOX gox
Unboxing Check
Thank you for purchasing our products, please read the instruction manual carefully before use. Instruction manual contains necessary safety advice and user instructions, follow the instruction manual to operate in order to avoid damaging the product for misuse. Check whether the product is damaged or not when you receive the product.
Package list:
Phone Stand Speaker x 1 USB cable x 1 User manual xl
Warnings:
The power requirement of this product is USB DC 5V/1A. Once the range exceeded, please use the regulator device, otherwise It will affect Its service life.
PRODUCT SPECIFICATION
Product model: GO X Product material:ABS Product size: Product weight: Bluetooth name:GO X Speaker wattage:45W Type-C input:>5V 1A DC Charging time:2-3 hours IN THE BOX: Phone Stand Bluetooth Speaker x 1 USB-C Charge Cable x 1 Manual x 1
Notice:
l. Strictly in accordance with the instructions of this operation, do not disassemble the host and accessories. 2. This product is suitable for indoor use. 3. When listening to music, please keep a proper volume.
Hott button function description
1 long press 2-3secends,the Speaker ON/OFF Answer phone /Hung up phone 2 short press Pause , long press ,change the led light to the next effects 3 short press ,Previous song, long press ,turn off the lights 4 short press ,Next song, Long press,run all light effects. 5 volume +/6 Type-c charge port
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Microsoft Word 2019