User Manual for avlink models including: 128.823UK, 4K HDMI 4-Way Switch with Remote Control
4K HDMI 4-Way Switch with Remote Control. Item ref: 128.823UK User Manual. This slimline HDMI switch allows a single display to be connected to up to 4 HDMI input sources and selected using the...
4K HDMI 4-Way Switch with Remote Control. Item ref: 128.823UK User Manual. This slimline HDMI switch allows a single display to be connected to up to 4 HDMI input.. View
4K HDMI 4-Way Switch with Remote Control Item ref: 128.823UK User Manual This slimline HDMI switch allows a single display to be connected to up to 4 HDMI input sources and selected using the IR remote control or buttons on the unit. Gold plated connections ensure optimum signal transfer and the LED's on the front of the unit keep you informed as to which of the inputs are live at any one time. This updated version supports a Picture-in-Picture (PiP) function showing previews of all connected devices and allowing input selection on the main display screen. Technical Specifications and Features HDMI Version Video Format Audio Format Operating Temperature Range Power Adaptor Max. Bandwidth Max. Baud Rate Max. Working Current Dimensions Weight 1.4b Up to 4Kx2K @ 30Hz, 24/30/36 bit deep colour DTS-HD, Dolby-trueHD, DTS, Dolby-AC3 and DSD -15 to +55°C Input: AC (50Hz, 60Hz) 100-240V, Output: DC5V/1A 325 MHz 3.2Gbps 300mA 178 x 58 x 20(mm) 220g Connection Instructions · Using an HDMI cable of the required length, connect one end to the output port of the device and the other up to your display device (max 25m long). · Then using up to 4 additional HDMI cables connect your source devices to the input ports (max 15m long). www.avsl.com 128.823UK User Manual Unit back · Finally, connect the 5V power adaptor supplied to the unit and switch on. · The switch inputs can now be selected manually using the select and OK switches on the front of the unit. · The green LED's on the front of the unit will indicate which device is live at any one time. · Alternatively, there is now also a Picture-in-Picture (PiP) function which shows a preview of all connected devices on the main screen. Unit front · To activate the PiP function, press the "OK" button on either the front of the unit or the remote control. · You will then see small preview screens of the other connected devices in order from top to bottom. (Note: in 4K mode only small icons will be visible instead of preview screens). · Navigate up and down the preview screens using either the "Ch+" and "Ch-" buttons on the remote control or the "Select" button on the unit, press "OK" on the remote control or front of the unit to confirm. Inputs 2, 3 and 4 shown as preview screens Input 1 is displayed on the main screen In The Box 1. HDMI Switch 4x1 2. IR Remote Control 3. 5V DC Power Adaptor 4. User Manual Warning · For reasons of electrical safety this device must never be immersed in water, exposed to damp conditions or excessive force. · Please do not use this device if you find that it is damaged in any way and only use the power supply provided by the manufacturer. · When not in use for long periods please disconnect the power supplies from the mains. · Do not attempt to repair this device or take apart under any circumstances, as this will invalidate your warranty. This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines. Errors and omissions excepted. Copyright© 2021 AVSL Group Ltd, Unit 2 Bridgewater Park, Taylor Road, Trafford Park, Manchester. M41 7JQ. www.avsl.com AVSL (Europe) Ltd, Unit 3D North Point House, North Point Bus. Park, New Mallow Road, Cork, Ireland. 128.823UK User ManualMicrosoft Word for Microsoft 365