User Guide for ACETECH models including: PTG0330-S, PTG0330S, 2AVZWPTG0330-S, 2AVZWPTG0330S, ACE Target App, App

ACETARGET D UM0300-02(ZH EN JP)

Users Manual

Acetk Corp LTD. PTG0330-S ACETarget-D 2AVZWPTG0330-S 2AVZWPTG0330S ptg0330 s


File Info : application/pdf, 20 Pages, 3.89MB

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=5713959
ACE Targe
.BOVBM

;)
D &/ +1

Table of contents

AceTarget-D(Dynamic) Contents ------------------------------------- 1

Precauons ---------------------------------------------------------------- 2

Quick Start Guide -------------------------------------------------------- 3

Product Introducon---------------------------------------------------- 5

App. Operaon Guide -------------------------------------------------- 6

1. Download App.

6

2. Connect Host

6

3. Run the App

7

4. System Funcon Guidance

8

5. System Setup Descripon

12

6. Game Seng

14

7. Game Racords .

17

Warranty -------------------------------------------------------------- 17

AceTarget-D(Dynamic) Contents
Contents

Item Contents  1 AceTarget-D  2 Rail sets

Image

Quanty Instrucon

 1

With 18650 Li-Ion Baery



1

(6Pcs) Total length 90(cm)

 Type C

3 Charging

1

 cable



  4

PCChBarging

Protect

1

Shield

Length 1 meter
To protect the charging connector been hit

Non-slip 5 mat

Sck under the 24 depending on
the situaon

6

M3x15 Screw

 

ACETECH 7 Velcro

8

For rail securing use

1

Replacement for target ball

8 Motor 9 Manual

1 replacment 1

1 EN

Precauons
±Please remove the baery insulaon tab before the first me use and charge it for at least 6 hours.(The maximum charging current is 500mA.)  IS
± The target ball and connecon part of AceTarget-D is consumable and not covered by the warranty. Consuming speed is varied by the frequence of usuage, and the velocity of the airso gun.
±Bullet marks and dents on the target ball and face are normal and not be covered by the warranty.
±When using an AceTarget-D, the metal covered front should face to the shooter. There is no protecon at the back side of the AceTarget.
±AceTarget can be charged when it is being used. Please avoid charging cable and portable charger being hit by BBs.
±Please turn off AceTarget when it is not in use. ±Recharge AceTarget for 30 minutes once in every 3 month to avoid
baery damage.
2 EN

Quick Start Guide
1. Assemble the rails and screw the "PCB Charging Protect Shield on the rail.
2. Remove the baery insulaon tab and charge AceTarget for at least 6 hours before use. Make sure the charging connectors of the target and rail are on the same side. And connect with type C charging cable .  IS
 IS
3 EN

BeRfeormeove

Turn off all the devices before seng the channel. And refer to page 5 for the seng details. Set up an Acetarget as "Host" and others are "Slave"
 If there are 2 sets of AceTarget systems in the same area, set the WIFI into differenct channels to avoid being bonded as one system.

Off
O I

Off
O I

ON DIP 1234

ON DIP 1234

Wifi Host

Wifi Slave

4. Download the AceSo App. on a mobile device and run the App aer installaon.

IOS
5. Connect the mobile device to any of AceTarget-S. Default password: 12345678

Android

 6. Start the games. For more details of the operaon for the games,
please refer to App. Operaon Guide
4 EN

1SPEVDU*OUSPEVDUJPO
"SFDPNNFOEFE5BSHFUTZTUFNJTJODMVEFEQDT"DFUBSHFU4BOE  QD"DFUBSHFU%
"DF5BSHFU%The Moving ball target installed on the rail can be moved le and right, and the rail extension length can be purchased, whole system execute by the smart device with WIFI connecon, execute the AceSo App operaon and use.
%FUBJMT
  A. 4 digit Seng Buon: Toggle the switch to the symbol "ON" for binary "1". Toggle the switch to the digits "1 2 3 4" for binary "0" . The first digit sets the Host/Slaved1 : Hostd0: Slave. Only one device is allowed to be Host, the rest devices shall be set as Slave as the default seng. The switches on 2, 3 and 4 can provide 8 independent WIFI channels. The same system must be set to the same channel. The default seng is channel "Acetarget1"

Digits
0/


Channel Channel 1

Digits
0/


Channel Channel 5

0/ 

Channel 2

0/ 

Channel 6

0/ 

Channel 3

0/ 

Channel 7

0/ 

Channel 4

0/ 

Channel 8

  B. Power Buon C. Speaker hole: The Speaker can beep and the volume can be adjusted by App D. TYPE-C Charging Port and Indicator LED E. Power port for rail F. Dimensions: 135mm x 113mm x 162mm G. Weight: 580g (including baery)

C

off

on

ON 12 34

A B

D

E

5 ZH


App Operaon Guide
1. Download App  Scanning the QR code on the package to download AceSo Appy
or searching on App Store (Apple) or Play Store (Android). Android 5.0 / iOS 10.0 or later is recommended

IOS

Android

2. Connect Host  Turn WiFi of the mobile device on and connect to AceTarget(1-8).
Password: 12345678. Host can only be connected by one mobile device only.



6 EN

3. Run the App. Make sure the mobile device has connected to Wi-Fi of AceTarget. Run the App, the app displays the following picture. Tap the device figure to enter the game seng.

3:09

3:09

AceTarget7

Connect to your Acetech Device

AceTarget

Game--Shot Timer Round--1

Duration of game --15

Start
Game Record

Device

Record

Joule

ACETECH

Device

Record

Joule

ACETECH

7 EN

4. System Funcon Guidance: Tap

3:09
AceTarget7
Game--Shot Timer Round--1 Duration of game--15
Start
Game Record

3:09
System Status
Target Number: 24
Moving Target Number: 1
Coin Slot Machine: 1
Lighter BT

Device

Record

Joule

ACETECH

Device

Record

Joule

ACETECH

8 EN

 "Target Number: 13" means there are 13units of AceTarget-S in the system. "Moving Target Number: 1" means there are 1 units of AceTarget-D JO
 UIFTZTUFN
¸Tap Target Number to check the remaining baery percentage of each AceTarget-S. When AceTarget-S connect to socket power and no baery percentage be displayed
¸5BQ10
BOEUIFDPOUSBQPTFE"DF5BSHFU%SJTFBOEMJHIUVQ

3:09
System Status
Target Number: 24
Moving Target Number: 1
Coin Slot Machine: 1
Lighter BT

3:09
System Status Target

1

2

3

4

5

6

7

8

9



10

11

12

13

Device

Record

Joule

ACETECH

Device

Record

Joule

ACETECH

9 EN

 ¸Tap Target Moving Target Number to see the mileage of AceTarget-D. Then, Tap the icon 15 the selected AceTarget-D to turn on grenn light, and there will be a message on the App asking if you need to clear the mileage of AceTarget-D. The mileage record of the selected AceTarget-D will be erased aer the requirment of the message is confirmed.

3:09
System Status Target Number: 24
Moving Target Number: 1
Coin Slot Machine: 1

3:09
Moving Target Mileage

14

15

46/104101mm

111/130m

Lighter BT

10 EN

3:09
Moving Target Mileage

14

15

46/104101mm

111/130m

Warning Do you to clear moving
target mileage?

Cancel

Yes

5. System Setup Descripon: Tap to enter the System Setup QBHF

3:09
AceTarget7
Game--Shot Timer Round--1 Duration of game--1
Start
Game Record

Device

Record

Joule

ACETECH

3:09
Settings
Target Setup

System Setup

Upgrade firmware Update Upgrade Voice File Update

Upgrade coin m.... Update

i Firmware
version: 1.023

The latest version: 1.023

Device

Record

Joule

ACETECH

11 EN

 A. Target Setup:  1. Auto Adjustment : Rise all AceTarget-S to check the locaon,
and AceTarget-D move around to remeasure the length of rail. The target flashes green to indicate that it is working properly, and it flashes red abnormally. 2. Call ID: Enter to check the current baery percentage.Tap the number on the screen, the corresponding target rise up with green light, shows the AceTarget-S locaon.

3:09
Target Setup
A Auto Adjustment

3:09
Call Target

1

2

3

Call Target

4

5

6

12 EN

3:09
Target Setup
A Auto Adjustment

Call Target

Color

Target Sound

Score Board Brightness
Target Brightness

Device

Record

Joule

ACETECH

B. System Setup:
3:09
Settings
Target Setup

3:09
Settings
Target Setup

SPylesatesme iSneptuutppassword

Upgrade firmware Update

Cancel

Yes

Upgrade Voice File Update

SPylesatesme iSneptuutppassword

acetarget

Upgrade firmware Update

Cancel

Yes

Upgrade Voice File Update

¸Enter the password to change the mode. (Default Password: acetarget)
¸To switch to Arcade Mode, a coin slot machine is requested.
¸Aer entering the correct password, the user enter by new password, (Enter at least four digits.)
¸Then fill up the new password

3:09
Settings
Password

$

Coin Slot Machine ON

$

Slot machine

time limit

Max. of shots

30sec X 3

3:09
Settings

Password

$

Please input password
Coin Slot Machine ON

$

Slot machine

Canticmeel limit

30sec
Yes

Max. of shots

X 3

D. Update firmware /Update voice / Update coin slot Machine  5BQ6QEBUFCVUUPOUPVQEBUFUIFMBUFTUGJSNXBSFGPSDPOOFDUFE
 "DF5BSHFU4BOE"DF5BSHFU%POFCZPOF

13 EN

6. Game Seng: Total 4 Game Modes and a Demo.
3:09
AceTarget7

Game --Shot Timer

Round--1

Duration of game--15
Shot Timer Whack a Mole
  Rescue  Compete Demo



Cancel





Joule

ACETECH

1) Shot Timer :  The Shot Timer game starts
aer the countdown to 3 2 1 and all target face rise up. When me is over or all the AceTarget are hit down, means the game is over. The less me the shooter spends to terminate the game, the more accurate it represents.

3:09
AceTarget8
Game--Shot Timer Round--3
Duration of game--15
Start
Game Record

14 EN

 4) Compete :  Compete game. Only one
AceTarget rise up at a me. The higher the LEVEL is, the shorter the rising me will be. One AceTarget-S rise up aer the former target is automacally down or manual hit down by the shooter. The game ends aer all the AceTarget are down in sequence.

3:09
AceTarget7
Game--Compete Level --3 Round --3 Target app--eras for---2 Sec
Start
Game Record

 5) Demo :  Demonstraon mode. The
system automacally take turns to demonstrate 4 games, providing operators to demonstraon the modes.

3:09
AceTarget7
Game--Demo

Start
Game Record

¸When a AceTarget-S rise up, a green LED light will be projected on the target face, and a beep will sound to remind the player to start shoong.
¸Difficulty and mes sengs of each game are adjustable. ¸Level: Difficulty, set range 1~5. 1 is the easiest, and 5 is the most
difficult.  LEVEL=1 : AceTarget-D speed = 1dMove le and right regularly
LEVEL=2 : AceTarget-D speed = 2dMove le and right regularly LEVEL=3 : AceTarget-D speed = 3dMove le and right regularly LEVEL=4 : AceTarget-D speed = 2dMove le and right randomly LEVEL=5 : AceTarget-D speed = 3dMove le and right randomly ¸Round : The seng range is 1~5. 1 means that all AceTarget-S rise up and fall once. Round 2 means all AceTarget-S rise up and down twice, and so on. ¸)PTUBHF/VNCFSPGIPTUBHFTJOUIFSFTDVFHBNF3FEUBSHFUGBDFJT  POGPSUIFIPTUBHFT
NJTUBLFOMZIJUUJOHUIFIPTUBHFXJMMEFEVDUUIF  QPJOUT
16 EN

 2) Whack a Mole :
 Whack a mole game. When the game starts, the AceTarget-S rise up randomly. According to the difficulty level of the game, there are up to 3
AceTarget-S rising at the same me. AceTarget have different duraon rising-up per the difficulty level. The shooter must hit the target down within the duraon to get scores.

3:09
AceTarget7
Gam-e--Whack a Mole Level--2 Round --3 Target apperas for---2 Sec
Start
Game Record

 
3FTDVF
 Rescue game is similar to the Whack a Mole game. The hostage roles join the game(Red target face is on for the hostages) mistakenly hing the hostage will deduct the points.

3:09
AceTarget7
Game--Rescue Level--3 Round--3 Hostage --1 Target apperas for---2 Sec

Start
Game Record

15 EN

7. Game Record .  Record points of each game separately. Take Quick Shoong for
example as shown below: Aer the the game, enter the User Name and tap Yes to keep the record. Tap the Record on the game page, and all the shoong records can be seen. The records can be sorted by tap tles. 5IFSFDPSETDBOCFTPSUFECZUBQUJUMFT
3:09
AceTarget7

--Uesr Name

YYYYY

 

Cancel

Yes

3:09
AceTarget7

Game--Demo

Start
Game Record


5IFSFDPSETDBOCFTPSUFE CZUIFJUFNTJOUIFUJUMF

Warranty
1. 12 months warranty from order date. 2. Warranty not covering,
A. Unauthorized dismantling or repair B. Damage from incorrect usage, external force, or liquid intruding inside
the product C. Lightning strikes and other damage caused by natural disasters. D. Products without product serial number scker.

17 EN

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: CAUTION Any changes or modificaons not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon.
RF exposure warning This equipment must be installed and operated in accordance with provided instrucons and the antenna(s) used for this transmier must be installed to provide a separaon distance of at least 20 cm from all persons and must not be co-located or operang in conjuncon with any other antenna or transmier. End-users and installers must be provide with antenna installaon instrucons and transmier operang condions for sasfying RF exposure compliance.

www.acetk.com acetech007

6. 3
Made In Taiwan



References

Adobe PDF library 16.03 Adobe Illustrator 26.0 (Windows)