Simonrack Simonforte Heavy-Duty Shelving Safety Instructions
General Safety and Load Capacity
Maximum Load: Never exceed the specified maximum load per shelf and for the entire rack.
Load Distribution: Ensure the load is evenly distributed over the entire shelf area to avoid point loads.
Assembly: Follow the assembly instructions carefully and make sure all screws and fasteners are tight.
Wall Anchoring: Shelving units must be firmly anchored to the wall to achieve maximum load capacity.
Regular Inspections: Perform regular inspections to ensure there are no structural damages or loose parts.
Handling Heavy Loads: Use proper lifting equipment and techniques to place and remove heavy loads to prevent injury or damage.
Usage Restrictions: Do not climb on the shelves or use them as ladders.
Surface Requirements: Only use on flat surfaces.
Area Clearance: Ensure that the area around the shelves is free of obstacles to ensure safe working.
Manual Reference: Read the entire manufacturer's instruction manual carefully and follow all listed safety precautions. Before use, read all manufacturer information. Warning instructions cover some risks but not all. Keep manuals for reference.
Child Safety and Packaging Hazards
Child Use: Products should never be used by children or by persons with reduced physical, sensory or mental abilities or lack of experience and knowledge, unless the manufacturer's manual explicitly allows. Children should never play unsupervised. Cleaning and maintenance must not be performed by children.
Packaging Hazard: ⚠️ Risk of suffocation. Packaging materials are not toys. Keep packaging out of reach of children and people with reduced abilities.