User Manual for Saramonic models including: SR-BH5, SRBH5, 2ARN3-SR-BH5, 2ARN3SRBH5, SR-BH5, Noise Cancelling Wireless Sport Headphones

SR-BH5说明书 V00

User Manual

Shenzhen Jiayz photo industrial.,Ltd SR-BH5 2ARN3-SR-BH5 2ARN3SRBH5 sr bh5


File Info : application/pdf, 22 Pages, 2.98MB

GetApplicationAttachment.html?id=5567997
Noise Cancelling Wireless Sport Headphones 
SR-BH5
User Manual 

FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Statement
Thank you for purchasing Saramonic! Please read this manual carefully before using and strictly operate and store it in accordance with the instructions. Please save manual for your future reference. If you need further assistance than the user manual, please consult with your retailer for help or email us: info@saramonic.com
Packaging List

SR-BH5 Headphones

Carrying Bag

Charging Cable (Type-C)

Eartips (2 Pairs)

User Manual

Warranty Card 01

Product Overview
 Microphone  Active Noise Cancellation (ANC) Switch  Type-C Charging Port  Indicator  Volume +/ Previous Song  Volume -/ Next Song  Multi-function button
02

LED Indicator Status

Equipment Status

Indicator Light

Power on

Blue indicator flashing 1s

Power off

Red indicator flashing 1s and then turn off

Icon Voice Prompts Power on Power off

Playing

Blue indicator flashing 1 time / 3s

Charging

Indicator solid red

Fully charged Battery low Pairing Connected

Indicator solid blue When connected, the red indicator flashing 1 time / 10s Red and blue indicators flashing alternately
Blue indicator flashing 1 time / 3s

Battery low
Your headset is connected

Specifications

Model Bluetooth Version Driver Specifications Impedance Frequency Response

SR-BH5 5.0 12mm Graphene 32 20Hz~20kHz

Music Play time

Approx 15 hrs (ANC off, BT on) Approx 9 hrs (ANC on, BT on)

Supported Audio Formats APTX, APTX-HD, AAC, SBC

Operating Distance
Noise Cancellation Depth
Battery Capacity

10m 22dB 182mAh

Charging Time

Approx 2 hrs

Dimensions

160*130*35mm

Weight

37g

Note: BT=bluetooth, ANC=active noise cancelling

03

Button Operation
 Active Noise Cancellation (ANC) switch Turn on the ANC mode: Flick down the ANC switch Turn off ANC mode: Swipe up the ANC switch (red dot indicates) Note: Slide the ANC on / off switch to turn on or turn off the ANC mode.
 Volume +/Previous Track Volume up: Short press the Volume + button (Maximum volume will be reminded) Previous song: Long press the Volume + button
 Volume-/Next Track Volume down: Short press the Volume- button (Minimum volume will be reminded) Next song: Long press the Volume- button

 Multi-function button

Equipment Status Turn on/ off Play/ Pause

Instructions Long Press for 5s Click once

Voice assistant

Double-click

Reset the device

After power off, long press for 8s

Answer/ hand up Reject Calls

Double click Long press for 1s

Headphones / mobile phone hands-free switch

Long press for 1s

Tips: Please turn off the ANC function when stop using this headphone to avoid battery consumption. Please use high-quality playback sources to experience the best sound quality.
04

Instructions for Use
1. Pairing  Long press the multi-function button for 5s, the headphone will automatically start pairing;  The red and blue lights flash alternately;  Select the Bluetooth name "Saramonic BH5" on your device;  Once successful, the voice prompts "Your Headset is Connected".
After the connection is successful, you can check the battery level on the phone

Note: The headphone will automatically turn off if there's no connection after 5 mins.

Bluetooth MY DEVICES Saramonic BH5 Saramonic BH600 Saramonic BH900

2. Unfold and put on the headphone, adjust it into a comfortable position in the direction shown.
05

3. Charging Use the Type-C cable to charge the headphones.

Equipment Status
Battery low Battery low and turn off
automatically

Voice Prompts Battery low Power off

Indicator Light When connected, the red indicator flashes 1 time / 10s
Red indicators flashes 1s and then turn off

Multi-Device Connection (Wireless)
1. Connect the headphone with the first device.
2. Turn off Bluetooth on the first device, the headphone will enter pairing mode automatically again.
3. Search the Saramonic BH5 on the bluetooth list of the second device, select it and connect the headphone.
4. Go back to first device, select Saramonic BH5 and connect.
5. Now the headphone is connecting with two devices simultaneously.
06

After-sales and Supports

Warranty Service: 2 years Quality Warranty

Life time Technical Service Support

According to the relevant laws and regulations of consumer electronic products and the actual the situation of the industry, the following after-sales service regulations are formulated to provide consumers with satisfactory after-sales services:
1. Warranty certificate mainly includes: warranty card and sales certificate.
2. After-sales service scope: · During the warranty period of the product, the company will be responsible for providing free maintenance for any failure caused by the quality problem of the product itself under normal use without disassembly and repair; · For products beyond the warranty period, the warranty certificate shall be issued and the maintenance fee shall be paid. If any spare parts are needed for repair cost for the spare parts would be born by the purchaser; please avoid repair and replace when the product is not tested by Saramonic after-sales department; · Once the warranty certificate is altered, the warranty will become invalid immediately; · The warranty certificate of the product shall be properly kept by the consumer and shall not be supplemented if lost.
3. Warranty Period: · Within two years after purchasing this product, there are quality problems in normal use
(non-human damage) without disassembly and repair; · Consumers who have quality problems in normal use (non-human damage) within 7
days from the date of purchase, without repair, can enjoy the replacement service; 1-year warranty (including all accessories) from the date of issuing the sales certificate;
4. Regulations on invalidation of the warranty during the warranty period: 4.1 In the following cases, the warranty is invalid, but the maintenance service is provided,
the labor fee and parts fee are charged: (1) any damage to accessories caused by improper use, maintenance and storage of
consumers; (2) damage caused by force majeure, such as natural disasters. 4.2 In the following cases, the company will refuse to provide maintenance services or provide charged maintenance services: (1) fail to provide holograms on product packaging box; (2) the contents of the holograms are altered or illegible; (3) It is unable to provide the product warranty card or the content recorded in the
warranty card is inconsistent with the product, or the content is altered or illegible; (4) headphones that have been removed by any unauthorized person of Shenzhen
Jiayz Photo Industrial., Ltd. (such as changing wires, removing voice coils, etc.); (5) there is no sales voucher or the content of the sales voucher is inconsistent with the
product.
5. We will not provide warranty service in the following cases after our inquiry: if we find that your repair products are not our products, we will refuse to provide warranty service, or double the maintenance fee. Please attach the warranty certificate when you send the headphones to our company for repair. If you don't have any certificate, our company will handle it as parallel imports.

07

Safety Instructions
Please read the following precautions carefully before using. 1. Please do not put the headphones close to flammable materials to avoid fire accidents when charging. 2. Please keep the plastic bag away from babies and children to avoid suffocation. 3. Please keep the headphones and all accessories away from children and pets, to avoid swallowing as it may cause asphyxia and other dangers. 4. Please do not use the headphones in situation which need concentration, such as driving, cycling and etc. Please abide by the local laws and regulations for using headphone when driving. 5. Please avoid using indicator light of the device near children or animals eyes. 6. Please do not use the headphones too long at high volume as it may damage your hearing, it is recommended to use an appropriate volume when listening to calls and music. 7. Please do not rinse or immerse the headphones in water to avoid damage. 8. Please do not disassemble the headphones and accessories by yourself to avoid damage and invalidation of the warranty. 9. Please do not subject the headphones to a strong shock or vibration to avoid damage.
10. Please do not use chemical solvents or detergents to clean the headset. 11. If this headset will not be used for a long time, it should be power off after
fully charged. Please unplug the charging cable after charging and use the charger provided by the official manufacturer or for charging.
08

Q&A
Q: The headphone cannot connect to the device? A: Please make sure your headphone is in pairing mode. Delete the pairing record on the Bluetooth device and reconnect the headphone. Q: The headphone cannot be turned on? A: Please check if the headphone has power. Q: Can the battery in the headphone be replaced? A: No. This headphone uses a built-in non-removable lithium polymer battery that cannot be replaced. Q: Can I use headphone while driving? A: For your safety, we strongly recommend that do not use the headphone while driving to avoid danger. Q: Why the headphone is disconnected within 10 meters? A: As the Bluetooth signal connection may be interfered when it encounters WiFi routers, 4G signals, high-power electrical appliances and other devices etc. You can change the environment or try again. Q: Why is there no sound on the computer or mobile phone? A: Please check whether the output channel of the computer supports A2DP. Also check the volume setting on the headphone and computer/phone. Q: Why can't I control the volume of the tracks playing on my phone? A: As the headphone may not be fully compatible with some apps, due to the different configurations of various APP.
09

Saramonic
  : info@Saramonic.com

 Type-C

 x2

10


     Type-C  /  +/  -/  
11

       

 
3/   ,10/  3/

Power on Power off
Battery low Your headset is
connected



SR-BH5 5.0 12mm 32 20Hz~20kHz 15() 9() aptXaptX-HDAACSBC 10 22dB 182mAh 2 160x130x35mm 37
12

 / /
 

 5  
8

/  /

 1 1

13

 5    "Saramonic BH5"  "Your headset is connected"

Saramonic BH5 Saramonic BH600 Saramonic BH900

: 5  

2.  
14

Type-C
Battery low Power off  
1.  2. ; 3.  4. Saramonic BH5; 5. 
15

2 
   :
1.  :

2.  : · 
 ; · 
 ;   ;    ; ·  · 
3.  : ·  
  ; · 7  ; · 
4.  : ·  : 1 ; 2 ·  : 1  2  3
5.  :    
16

1. 2. 3.
 4.
 5. 6.
 7. 8. 9. 10. 11.

17

FCC ID: 2ARN3-SR-BH5 18

Scan the QR code and follow us 
Shenzhen Jiayz Photo Industrial., Ltd 
A16 Building, Intelligent Terminal Industrial Park of Silicon Valley Power, Guanlan, Longhua District, Shenzhen, China A16

400-613-1096

www.saramonic.com

info@saramonic.com

43#) 43#)


 

7

 NN


Adobe PDF library 15.00 Adobe Illustrator 25.2 (Macintosh)