Instruction Manual for COOLER MASTER models including: Blast Powercore gen5 eW, Blast Powercore, Powercore, Powercore gen5 eW
2022-08-05 — Blast Powercore gen5, RGBW high-performance LED luminaires combine white and rich, saturated, color and color-changing effects with simplified installation.
File Info : application/pdf, 4 Pages, 708.04KB
DocumentDocumentBlast Powercore gen5, RGBW Exterior versatile and customizable luminaire with intelligent RGBW light Blast Powercore gen5, RGBW high-performance LED luminaires combine white and rich, saturated, color and color-changing effects with simplified installation. Blast Powercore gen5 offers a range of accessories that allow customizable beam angles for floodlighting, spotlighting, wall washing, and grazing, along with the efficiency and cost-effectiveness of Powercore technology in a rugged die-cast aluminium housing. Date: Type: Firm Name: Project: 100 277 VAC, 10° x 40° Asymmetric Spread Lens, Gray Housing, UL/CE/CQC · Expands customization with a wide range of new accessory options. In addition to the native 10° lens, five different spread lenses can customize the luminaire to produce 20°, 40°, 60°, 80°, and 10° x 40° (asymmetric) beam angles. Three housing color choices (black, gray, and white) plus the option to add or combine a louver, rock guard, full glare shield, and half glare shield create new aesthetic possibilities for designers and architects. · Improves color consistency between all LED luminaires in a family with Chromasync technology. During the manufacturing process a calibrated light measurement device creates an algorithm to define a common color gamut for an entire family of LED luminaires. When Chromasync is enabled, color consistency between luminaires is achieved without having to manually adjust color points on each luminaire. · Meets ASTM B117 standard for > 1,500 hours of corrosion resistance and ANSI C136.31-2010 standard with a 3G vibration rating. · Features an innovative, redesigned optical system that improves the quality of light from each LED, enhancing the color uniformity and color mixing capabilities of each Blast Powercore gen5 luminaire. · Improves durability with new flat lens that prevents water from pooling into the luminaire, keeping the LEDs protected and secure over the course of a luminaire's lifetime. · Integrates patented Powercore technology that controls power output to luminaires directly from line voltage rapidly, efficiently, and accurately. The Color Kinetics Data Enabler Pro merges line voltage with control data and delivers them to luminaires over a single standard cable, dramatically simplifying installation and lowering total system cost. · Universal power input range of 100 to 277 VAC. · Works seamlessly with the complete Color Kinetics line of controllers, including ColorDial Pro, iPlayer 3, and Light System Manager as well as third-party controllers. For detailed product information, please refer to the Blast Product Guide at https://www.colorkinetics.com/global/products/rgb/blast-powercoregen5-rgbw Blast_Powercore_gen5_RGBW_100-277VAC_10x40deg_Asymmetric_GrayHousing_UL Specifications Due to continuous improvements and innovations, specifications may change without notice. Output Physical Beam Angle Lumens Efficacy (lm/W) LED Channels 10° x 40° 1,790 38 Red/Green/Blue/White Electrical Input Voltage 100 to 277 VAC, auto-ranging, 50/60 Hz Power Consumption 47.0 W (Maximum at full output, steady state) Power Factor 0.99 @ 120 VAC Surge Limits ¶ 0.9 @ 277 VAC 2 kV maximum differential (L to N) 4 kV maximum common (L to Gnd or N to Gnd) For additional Surge Protection Requirements for LED Lighting Systems, please refer to www.colorkinetics.com/KB/surge-protection. Control Interface Data Enabler Pro (DMX/Ethernet) Control System Color Kinetics full range of controllers, including Light System Manager, Video System Manager Pro, iPlayer 3, Antumbra iColor Keypad, and ColorDial Pro, or third-party controllers Remote Monitoring & Management Works with Interact Landmark Lumen Maintenance Dimensions (Height x Width x Depth) Weight Effective Projected Area (EPA) Housing Material Lens Luminaire Connections 183.7 x 337.8 x 171.2 mm (7.2 x 13.2 x 6.74 in) 3.9 kg (8.2 lb) 0.068 m² (0.73 ft²) (Luminaire plus Full Glare Shield) Die-cast aluminium, gray powder-coated finish Clear tempered glass 1.8 m (6 ft) unified power/data cable Temperature Ranges -40 to 50 °C (-40 to 122 °F) Operating -20 to 50 °C (-4 to 122 °F) Startup -40 to 80 °C (-40 to 176 °F) Storage Vibration Resistance Complies with ANSI C136.31, 3G Mechanical Impact IK10 Corrosion Resistance Complies with ASTM B117 standard for > 1,500 hours Humidity 0 to 95%, non-condensing Thermal Protection enabled For additional Thermal Protection information, please refer to https://colorkinetics.helpdocs.io/article/sh301ducix Luminaire Run Lengths To calculate luminaire run lengths and total power consumption for your specific installation, download the Configuration Calculator from www.colorkinetics.com/support/install_tool/ Threshold§ L 90 L 80 L 70 L 50 Ambient Temperature 25 °C 50 °C 25 °C 50 °C 25 °C 50 °C 25 °C 50 °C Reported ¶¶ >39,715 >39,715 >60,000 >60,000 >60,000 >60,000 - Calculated ¶¶ >39,715 >39,715 >98,607 >98,607 >100,000 >100,000 >100,000 >100,000 Certification and Safety Approbation UL/cUL, FCC Class A, CE, PSE, CQC, RCM Environment Dry/Damp/Wet Location, IP66 For additional Energy Efficiency Class Information, please refer to https://colorkinetics.helpdocs.io/article/cviis2p8qq. Native beam lumen output measurements comply with IES LM-79-08 testing procedures. All other beam angle measurements are estimated based on the native beam measurements. § Lxx = xx% lumen maintenance (when light output drops below xx% of initial output). All values are given at B10, or the median value where 90% of the LED population is better than the reported or calculated lumen maintenance measurement. ¶ Minimum surge limits per IEC 61547, tested in accordance with IEC 61000-4-5. When mounting to a junction box, the Color Kinetics wiring compartment accessory must be used to maintain a 3G vibration rating. ¶¶ Lumen maintenance figures are based on lifetime prediction graphs supplied by LED source manufacturers. Whenever possible, figures use measurements that comply with IES LM-80-08 testing procedures. In accordance with TM-21-11, Reported values represent the interpolated value based on six times the LM-80-08 total test duration (in hours). Calculated values represent time durations that exceed six times the total test duration. 2 Blast Powercore gen5, RGBW, 100 277 VAC, 10° x 40° Asymmetric Spread Lens, Gray Housing, UL/CE/CQC Specification Sheet Dimensions Photometrics 10° x 40° frosted lens Photometric data is based on test results from an independent NIST traceable testing lab. IES data is available at www.colorkinetics.com/global/support/ies. Beam Angle LED Lumens Efficacy (lm/W) 10° x 40° RGBW 1,790.0 38 Blast Powercore gen5, RGBW, 100 277 VAC, 10° x 40° Asymmetric Spread Lens, Gray Housing, UL/CE/CQC Specification Sheet 3 Luminaire and Accessories Use Item Number when ordering in North America Luminaire Blast Powercore gen5, RGBW, 100 277 VAC, Gray Housing, UL/CE/CQC Luminaire only. Values in this specification sheet represent both the luminaire and spread lens combined. Spread lens available below in Associated Part. Associated Part 10° x 40° Spread lens Trim Ring required for mounting. Must be ordered separately. Accessories Trim Ring, Gray Louver, Gray Rock Guard, Gray Half Glare Shield, Gray Full Glare Shield, Gray Wiring Compartment UL/cUL, Gray Wiring Compartment CE, Gray Architectural Mounting Arm, for use with Blast, Graze, Graze Compact, Burst Architectural, and Vaya Flood. Short, gray Architectural Mounting Arm, for use with Blast, Graze, Graze Compact, Burst Architectural, and Vaya Flood. Medium, gray Architectural Mounting Arm, for use with Blast, Graze, Graze Compact, Burst Architectural, and Vaya Flood. Long, gray Power Supplies Data Enabler Pro, 3/4 in / 1/2 in NPT (U.S. trade size conduit) Data Enabler Pro, PG21/PG13 (metric size conduit) Item Number Item 12NC 423-000027-04 912400137699 120-000185-12 912400130348 120-000185-15 120-000185-17 120-000185-18 120-000185-19 120-000185-16 106-000011-32 106-000011-42 120-000206-00 120-000206-01 120-000206-02 912400133530 912400133532 912400133533 912400133534 912400133531 910503704149 910503703277 912400136642 912400136643 912400136644 106-000004-00 910503701210 106-000004-01 910503701211 © 2022 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. 08/05/2022 Color Kinetics https://www.colorkinetics.com/global/products/rgb/blast-powercore-gen5-rgbw
IES Files | Color KineticsUnderstanding Surge Protection For LED Lighting Systems - KnowledgebaseInstallation Tools | Color Kinetics
Color Kinetics Energy Label information - KnowledgebaseThermal protection and Color Kinetics luminaires - KnowledgebaseColor Kinetics Official Website | HomepageBlast Powercore gen5, RGBW | Color Kinetics