TP-Link Festa FR205 Regulatory Compliance

FCC Compliance Information Statement

Product Name: Gigabit VPN Gateway

Model Number: Festa FR205

Responsible party: TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618

Website: https://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Issue Date: 2024-6-25

CE Mark Warning & EU Declaration of Conformity

CE Mark Warning: This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

EU Declaration of Conformity: TP-Link declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/

UKCA Mark & UK Declaration of Conformity

UKCA Mark:

UK Declaration of Conformity: TP-Link declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

(French: L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1) L'appareil ne doit pas produire de brouillage; 2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.)

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

BSMI Notice (Chinese)

安全諮詢及注意事項 (Safety advice and precautions):

• 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。(Use the original power adapter or only use the product according to the specified power type.)
• 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。(Unplug the power cord before cleaning. Do not use liquid, spray cleaners, or damp cloths for cleaning.)
• 注意防潮,請勿將水或其他液體潑灑到本產品上。(Beware of moisture, do not splash water or other liquids onto the product.)
• 插槽與開口供通風使用,以確保本產品的操作可靠並防止過熱,請勿堵塞或覆蓋開口。(Slots and openings are for ventilation to ensure reliable operation and prevent overheating; do not block or cover openings.)
• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風,否則不可放在密閉位置中。(Do not place the product near heat sources. Do not place in enclosed spaces without proper ventilation.)
• 不要私自拆開機殼或自行維修,如產品有故障請與原廠或代理商聯繫。(Do not disassemble or repair the casing yourself; contact the manufacturer or agent if the product malfunctions.)

限用物質含有情況標示聲明書 (Statement on the indication of the presence of restricted substances):

備考1. "超出0.1 wt %" 及 "超出0.01 wt %" 係指限用物質之百分比含量超出百分比含量基準值。(Note 1. "Exceeds 0.1 wt %" and "Exceeds 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the percentage content threshold.)

備考2. "○" 係指該項限用物質之百分比含量未超出百分比含量基準值。(Note 2. "○" indicates that the percentage content of the restricted substance does not exceed the percentage content threshold.)

備考3. "—" 係指該項限用物質為排除項目。(Note 3. "—" indicates that the restricted substance is exempt.)

Ukrainian Compliance Statement

Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. (Product is certified according to the rules of the UkrSEPRO system for compliance with the requirements of regulatory documents and requirements stipulated by the current legislative acts of Ukraine.)

Packaging Recycling

♻️ This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

Safety Information

Keep the device away from water, fire, humidity or hot environments.

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact TP-Link.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended by TP-Link.
• Adapter shall be installed near the equipment and shall be easily accessible.
• Place the device with its bottom surface downward.
• Use only power supplies which are provided by TP-Link and in the original packing of this product. If you have any questions, please don't hesitate to contact TP-Link.
• The operating temperature for the device shall be within 0°C to 40°C (32°F to 104°F).

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.