Key Features and Safety
The Bestway Sand Filter is designed for efficient pool water filtration. It is crucial to read and follow all safety instructions provided in this manual to prevent potential hazards such as electric shock and equipment damage.
Key safety points include:
- Ensure the pump is supplied by an isolating transformer or a residual current device (RCD) not exceeding 30 mA.
- The power source should be at least 4m away from the pool.
- The appliance must be supplied by an earthed power source.
- Never operate the pump when people are inside the pool.
- Do not bury the power cord and replace any damaged cord immediately.
- Extension cords are not permitted.
Assembly and Operation
Proper assembly and operation are vital for the sand filter's performance and longevity. Ensure the filter is placed on solid, level ground, at least 2 meters away from the poolside, with adequate ventilation and drainage.
The manual details the use of the control valve, which has six functions: Filter, Closed, Backwash, Rinse, Drain, and Circulate. Always switch off the filter before changing the control valve position to avoid damage.
For initial setup, a backwash and rinse procedure is recommended to prepare the sand bed.
Maintenance and Troubleshooting
Regular maintenance, such as cleaning the strainer and monitoring filter pressure, is essential. The manual recommends cleaning the sand bed monthly or as needed, based on usage.
A troubleshooting section is included to help identify and resolve common issues like sand flowing to the pool, no water flow, excessive filter pressure, and leaks.
For further assistance or to order spare parts, visit www.bestwaycorp.com or check the Bestway YouTube channel.
