Instruction Manual for PDQ Locks models including: 6400, Rail Filler, Exit Device, Rail Filler Exit Device, 6400 Rail Filler, 6400 Rail Filler Exit Device, 6300
PDQ 6300/6400 Exit Device ation
File Info : application/pdf, 1 Pages, 75.42KB
DocumentDocument6300/6400 RAIL FILLER INSTALLATION ALL DEVICES Phone: 833-2-PDQTEC | www.pdqlocks.com Insert One Side First Push Down On Other Side With Thumb 1. INSERT FILLER CAP / RETAINER Insert one corner of Filler Cap into extrusion Filler cap is curved / spring-loaded and will not insert without pushing down on other side. Once both leading corners are engaged, push or tap cap into extrusion. 2. START FILLER Overlap plastic Filler Cap onto main rail extrusion being careful not to overlap extrusions. Put one side of filler down into extrusion. Push or tap other side to snap into place so filler will fit and slide into place. Insert One Side, Push On Other Side Until Seated Overlap Filler Cap but NOT Extrusions Slide Filler Into Position 3. SLIDE FILLER INTO PLACE Slide filler and filler cap into place proper position is flush with end of main rail. 1 639411 Rev0 03/11/22