芯联创展-RFID专业技术服务商|E710|E510|E310 RFID模块
Owner's Manual for SILION models including: SLR5318, 2AQ9M-SLR5318, 2AQ9MSLR5318, SLR1218, SLR5218, Desktop UHF RFID Reader-Writer, RFID Reader-Writer, Desktop UHF Reader-Writer, Reader-Writer, Writer
Beijing Silion Technology Corp.,LTD. SLR5318 RFID Reader 2AQ9M-SLR5318 2AQ9MSLR5318 slr5318
ReaderWriterHardwareManual 1 UHF RFID reader/writer Hardware manual （For SLR1218、SLR5218、SLR5318） Edition：V1.0 Date：2020/1/17
File Info : application/pdf, 10 Pages, 497.45KB
DocumentDocumentDesktop Reader Writer Hardware Manual Desktop UHF RFID reader/writer Hardware manual For SLR1218SLR5218SLR5318 EditionV1.0 Date2020/1/17 Beijing Xinlianchuangzhan Electronic Technology Co., Ltd Tel:+86010-62153842/62153840 http://www.silion.com.cn 1 Desktop Reader Writer Hardware Manual Disclaimers This document does not grant any license of intellectual property rights, and does not grant any license of intellectual property righ ts, express or implied, or by prohibiting speech or other means. Exce pt for the responsibilities stated in the terms and conditions of sal es of its products, our company does not assume any other responsibil ities. In addition, our company does not make any express or implied warranty on the sale and/or use of this product, including the applic ability of the product for a specific purpose, marketability, or liab ility for infringement of any patent, copyright or other intellectual property rights. The company may modify the product specifications a nd product descriptions at any time without notice. 2 Desktop Reader Writer Hardware Manual Chapter 1 Overview This series of readers have built-in small gain PCB antenna, excellent structural design, can effectively prevent the tag from being misread or serial read, positioned in the use of close reading card scenarios. Suitable for supply chain management, asset management and other fields of card issuing applications and close card reading applications. At the same time, it can support the optional high-gain ceramic antenna, combined with the high-performance RFID module to meet the use of higher card reading performance scenarios. The series currently has three main products model model difference SLR1218 Power range 5 - 30dbmhigh-performance SLR5318 Power range 5 - 30dbm SLR5218 Power range 13 - 20dbm Chapter 2: Technical Parameters Label / transfer protocol Tagged agreement EPC Class 1 Gen 2ISO18000-6C Radio frequency interface Antenna connection Default 0 dBi round polarized PCB antenna, optional 2 dBi round polarized ceramic antenna SLR1218: 5dBM~30dBm Adjustment accuracy1dBm Output power range SLR5318 5dBM~30dBm Adjustment accuracy1dBm SLR521813dBM~20dBm Adjustment accuracy1dBm SLR1218: < -85dBm Receiving sensitivity SLR5318< -75dBm SLR5218< -65dBm Work area support FCCNASA902-928MHz ETSI(EU) 865-867MHz SRRC-MII(P.R.China)840-845 MHz920-925MHz OPEN'(Custom)840-960MHz Transmission control interface communication USB2.0 communication / RS232 serial port communication, portport interface rate: 115200 bps (default) Universal GPIO port Two sets of inputs, and two sets of outputs Work status tips format Power indicator, read card status indicator, buzzer physical dimension 110mm×110mm×16.5mm Power supply / power consumption DC power supply USB power supply, external 5V (+ / -0.25V) power supply 3 Desktop Reader Writer Hardware Manual Work: (separate USB supply, only maximum transmitting power of 27 dBm)SLR1218: 3.9W(27dBm)/4.8W(30dBm) SLR5318: 2.7W(27dBm)/3.6W(30dBm) power dissipation SLR5218: 1.0W (20dBm) Stand SLR12180.35W SLR53180.25W SLR52180.25W environmental character istics working temperature -10 - +55 Storage temperature -20 - +60 function SLR1218 > 100 tag/second Label reading rate SLR5318 > 50 tag/second SLR5218 > 50 tag/second (In special case, related to labeling performance) 0dBi PCB Antenna 2 dBi Ceramic Antenna SLR1218 5cm - 80cm SLR1218 20cm - 3.0m SLR5318 3cm - 60cm Read the card distance SLR5218 10cm - 30cm SLR5318 10cm - 2.5m SLR5218 60cm - 1.0m The write distance is about 50% of the read distance(Test label: ALIEN9662 white card) Chapter 3: Hardware Description 3.1 Interface description 4 Desktop Reader Writer Hardware Manual 5 Desktop Reader Writer Hardware Manual USBUSB 1.1 / USB 2.0 GPIO(Universal Input / Output interface), from left to right (Pin 1-Pin 8) pin Definition instruction 1 +5V The equipment is connected to 5V(+/-0.25V) power supply 2 GND Power supply of equipment 3 TXD RS232 serial port data output 4 RXD RS232 Serial port data entry 5 IN1 GPIO Input (5-12V) 6 IN2 GPIO Input (5-12V) 7 OUT1 GPIO output (5V) 8 OUT2 GPIO output (5V) USB port / RS232 serial port communication switching switch: switch 1 2 3 USB ON OFF OFF RS232 OFF ON OFF (P)Indicator light: power supply indicator light, always on the power on. (S)Indicator: Read the card indicator until the card is on. 6 3.4 Appearance size Desktop Reader Writer Hardware Manual unitmm 7 Desktop Reader Writer Hardware Manual 4 Direction for use 4.1 link Connect the device through a serial port cable or USB cable to power up the device, (desktop right-click computer-Management-Device Manager-view the available COM slogan). Connection setting: fill in the COM slogan for the address, and select a single antenna for the number of antenna ports. Please refer to the demonstration software instructions for specific functions. 8 Desktop Reader Writer Hardware Manual 4.2 GPIO control Description: demonstrate the software-reader parameter GPIO interface setting IN1 GPI1 Input status: High level (5-12V) software determination logic 0 Input status: Low level (0V, or suspended) software determination logic 1 IN2 GPI2 Input status: High level (5-12V) software determination logic 0 Input status: Low level (0V, or suspended) software determination logic 1 OUT1GPO1 Software control logic of 0 Output end: Low level (0V) Software control logic of 1 OUT2GPO2 Software control logic of 0 Software control logic of 1 Output end: High level (5V) Output end: Low level(0V) Output end: High level (5V) Read card The GPO 1 logic is in 0 White light / buzzer silent; GPO 1 logic 1 9 Desktop Reader Writer Hardware Manual indicator lamp (white) / Buzzer control (GPO 1) Read card indicator lamp (red) (GPO 2) White light goes on / buzzer goes off GPO2 logic 0 Red light outGPO2 logic 1 The red light is on. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 10