Lepow 15.6" Z1 Series Portable Display User Guide

Package Contents

• LEPOW Portable Monitor
• Mini HDMI to HDMI Cable
• Type-C to Type-C Cable
• Type-C to USB A Cable (Power Supply)
• Smart Cover
• Screen Protector
• Wall Charger
• Warranty Card
• Gift Card

Note: If any items are damaged or missing, contact support@lepow.hk.

Monitor Introduction

Description of ports:

• Speaker: For audio playback.
• Mini HDMI: For audio and video signal transmission.
• 3.5mm audio out port: For connecting external speakers, headphones, or digital audio equipment.
• Full function Type-C port: For power supply, audio, and video signal transmission.

Description of controls:

• Power Button/Return Button: Press for 3 seconds to turn on/off; short press to return to the previous page.
• Roll Key: Press to enter OSD menu. Scroll up/down to navigate, press to confirm. In the main interface, scroll up for brightness, scroll down for volume.

Connect Monitor with Devices

1. Connection Condition

This monitor does not have a built-in battery. Ensure it receives sufficient power (5V/2A or above) before connecting to a device.

2. Connect with external power supply

Connect the monitor to a power supply (5V/2A or above) first, then connect it to your device. Insufficient power may result in "Power-Saving Mode" or "No Signal".

3. Connect without power supply

This mode requires a full-featured Type-C port on your device.

4. LAPTOP (With Type-C)

Connection Diagram: Laptop (via Type-C) connects to the Lepow Display (via Type-C to Type-C cable). The Display is powered by a Type C to USB A cable connected to an external power source.

Notes:

• For brightness and volume above 80%, ensure an external power supply (5V/2A or above) is connected.
• Not all Type-C ports support audio and video signal transmission. Verify your laptop's Type-C port capabilities.

5. PC/Laptop (With HDMI Port)

Connection Option 1: PC/Laptop (via Mini HDMI to HDMI Cable) connects to the Lepow Display. The Display is powered via Type C to USB A cable connected to an external power source.

Connection Option 2: PC/Laptop (via Mini HDMI to HDMI Cable) connects to the Lepow Display. The Display is powered via USB A to Type C cable connected to an external power source.

Note: The HDMI port does not support power transmission. An external power supply (5V/2A or above) is mandatory when using the Mini HDMI port.

6. PHONE (With Type-C)

Connection Diagram: Mobile Phone (via Type-C) connects to the Lepow Display (via Type C to Type C cable). The Display is powered by a Type C to USB A cable connected to an external power source.

Operation:

• Without external power: The phone powers the monitor, activating energy-saving mode with brightness at 30%.
• With external power: The monitor charges the phone. Use at least a 16W charger or power bank for sufficient current.

Note: Requires a full-featured Type-C port on the phone. For iPhones, a Lightning to HDMI adapter is needed.

7. Other Devices

Connection Diagram 1 (e.g., Set-top box): Device (via Mini HDMI to HDMI Cable) connects to the Lepow Display. The Display is powered by an external power supply.

Connection Diagram 2 (e.g., Gaming console): Device (via Mini HDMI to HDMI Cable) connects to the Lepow Display. The Display is powered by an external power supply via Type C to USB A cable.

Note: Connect the power supply cable first, then the Mini HDMI cable for smooth signal transmission.

Duplicate & Extend Mode Setting

Follow these steps to configure display modes in Windows:

1. Connect the Lepow monitor to your PC and a power outlet.
2. Right-click the desktop and select "Screen resolution" (Windows 7/8) or "Display settings" (Windows 10).
3. In the "Multiple displays" dropdown, choose "Extend these displays" or "Duplicate these displays".
4. If the monitor is not detected, click "Detect". If issues persist, restart your computer and repeat the steps.

(Visual Description: Screenshot shows Windows display settings with options for detecting displays, setting resolution, and choosing multiple display modes like "Extend these displays" or "Duplicate these displays".)

Screen Rotate Setting

Follow these steps to rotate the screen orientation in Windows:

1. Connect the Lepow monitor to your PC and a power outlet.
2. Right-click the desktop and select "Screen resolution" (Windows 7/8) or "Display settings" (Windows 10).
3. In the "Orientation" dropdown, select "Landscape" or "Portrait".

Note: If the "Orientation" option is unavailable, your laptop/PC may not support this feature.

(Visual Description: Screenshot shows Windows screen resolution settings with an "Orientation" dropdown menu offering "Portrait", "Landscape", "Landscape (flipped)", and "Portrait (flipped)" options.)

OSD Function Introduction

Use the Roll Key and Power Button to navigate the On-Screen Display (OSD) menu.

1. Press the Roll Key to activate the OSD menu.
2. Scroll the Roll Key up/down to select settings.
3. Press the Roll Key to confirm your selection.
4. Press the Power Button to return to the previous page.

OSD Setting - Brightness

Adjusts Brightness, Contrast, Black Level, and Sharpness. Each setting has an adjusting range from 0 to 100.

Note: Setting brightness to 80 may cause the screen to turn black if no external power supply (5V/2A or above) is connected.

(Visual Description: Screenshot of the OSD menu showing Brightness, Contrast, Black Level, and Sharpness sliders with corresponding values.)

OSD Setting - Image

ECO: Offers six modes: Standard, Game, Movie, Text, FPS, RTS.

DCR: Enable or disable dynamic contrast ratio function.

Aspect: Adjusts the aspect ratio to 4:3 or 16:9.

Note: Same note as Brightness regarding external power.

(Visual Description: Screenshot of the OSD menu showing ECO, DCR, and Aspect Ratio settings.)

OSD Setting - Color Temp

Color Temp: Choose between preset modes (Cool, Warm) or User Mode.

Adjusts Red, Green, and Blue levels, each with a range from 0 to 100.

(Visual Description: Screenshot of the OSD menu showing Color Temp settings with sliders for Red, Green, and Blue.)

OSD Setting (Language, Timer, Transparency)

Language: Select OSD language from: English, French, German, Simplified Chinese (简体中文), Italian, Spanish, Portuguese, Turkish, Polish, Nederlands, Japanese, Korean.

OSD Timer: Adjusting range from 0 to 100.

Transparency: Adjusting range from 0 to 100.

(Visual Description: Screenshots of the OSD menu showing Language selection and OSD Timer/Transparency sliders.)

OSD Setting - Reset

Reset: Reverts all settings to factory defaults.

MUTE: Select ON or OFF.

Volume: Adjusting range from 0 to 100.

(Visual Description: Screenshot of the OSD menu showing Reset, Mute, and Volume settings.)

OSD Setting - Miscellaneous

Signal Source: Select between Type C and HDMI.

Low Blue Light: Adjusting range from 0 to 100 (options: 0/25/50/75/100).

HDR MODE: Enable or disable HDR mode.

Displays resolution and refresh rate (e.g., 1920x1080 60Hz).

(Visual Description: Screenshot of the OSD menu showing Signal Source, Low Blue Light, and HDR Mode settings.)

Monitor Standing Positions

The monitor can be propped up using the smart cover in multiple positions.

Method 1: [Diagram Description: Shows the monitor propped up using the smart cover in one configuration.]

Method 2: [Diagram Description: Shows the monitor propped up using the smart cover in a different configuration.]

Specifications

• Product Name: Lepow Type-c Portable Monitor
• Net Weight: 770g
• Visual area: 344.16*194.59mm
• Screen Size: 15.6 inch
• Panel type: IPS
• Dimension: 368 * 225 * 8.8 mm
• Aspect ratio: 16:9
• Resolution: 1920*1080
• Display color: 16.7M
• Color temperature: 6800K
• Visual angle: H: 85°/85°Min V: 85°/85°Min
• Contrast ratio: 1000:1
• Brightness: 300cd/m²
• Color gamut: 72%
• Input Interface: Mini HDMI (Video signal), Type C full function (Video data, Power supply ISDN), Type C power supply
• Output Interface: 3.5mm headphone interface
• Speaker: Built-in speakers (1W*2)
• Refresh Rate: 60 Hz

*Specifications are subject to change without notice.

Supported Devices & Models

1. Phone

2. Laptop

Care & Cleaning

1. Turn off and unplug the monitor. Clean the surface with a lint-free, non-abrasive cloth. Stubborn stains can be removed with a cloth dampened with mild cleaner.
2. Avoid cleaners containing alcohol or acetone. Use cleaners specifically for LCD screens. Never spray cleaner directly onto the screen to prevent electric shock.

Normal Symptoms:

• Slightly uneven brightness depending on the desktop pattern.
• Temporary afterimages may remain after switching images; screen recovers slowly or by turning off the power.

If the screen becomes black, flashes, or stops working, contact tech support at support@lepow.hk. Do not attempt self-repair.

Contact Lepow

For any questions or support, contact Lepow:

• Official Website: www.ilepow.com
• Tech Support: ✉️ support@lepow.hk [24/7 service]
• Toll-Free: ? +1-877-971-0118 [Mon-Fri, EST: 9:00-17:00 / PDT: 06:00-14:00]
• Facebook: f https://www.facebook.com/lepowofficial

Notices

• Read all package documentation before setup.
• Keep the display away from rain or moisture to prevent fire or shock hazards.
• Do not attempt to open the display cabinet.
• Ensure all cables are correctly connected and undamaged before use. Contact support@lepow.hk if any damage is detected.
• Avoid dust, humidity, and extreme temperatures. Place the display on a stable surface away from wet areas.
• Do not insert objects or spill liquids into the display cabinet slots.
• For technical problems, contact tech support at support@lepow.hk immediately.

After-sales Service

Scan here to contact us [24Hrs Online]:

https://lepow.afterservice.vip