Dell S3222DGM Monitor Setup Guide
This guide provides instructions for setting up your Dell S3222DGM monitor.
Package Contents
The package typically includes the monitor, stand components, power cable, display cables (e.g., HDMI, DisplayPort), and documentation.
Step 1: Attaching the Stand
Follow these steps to assemble the monitor stand:
- Attach the stand arm to the stand base.
- Secure the stand arm to the monitor using the provided screws.
- Ensure all connections are tightened securely.
Step 2: Mounting the Monitor
Attach the monitor to the assembled stand:
- Align the monitor with the stand arm.
- Slide the monitor onto the stand until it clicks into place.
Step 3: Connecting Cables
Connect the necessary cables to the monitor and your computer:
- Power Cable: Connect the power cable to the monitor and a power outlet.
- Display Cables: Connect either HDMI or DisplayPort cables from your computer to the corresponding ports on the monitor.
Refer to the diagram for port locations: HDMI 1, HDMI 2, and DisplayPort (DP).
Step 4: Powering On and Adjusting
Connect the power cord to the monitor and then to an electrical outlet.
Use the power button, typically located on the back or bottom of the monitor, to turn it on.
The monitor can be tilted from -5° to 21° and adjusted for height (up to 100 mm).
Step 5: Software and Drivers
For optimal performance, download and install the latest drivers and software from Dell's website.
Visit Dell.com/S3222DGM for support and downloads.
Product Information
Model: Dell S3222DGM
Part Number: XMW39 rev.A00
© 2021 Dell Inc. or its subsidiaries. All rights reserved.