Instruction Manual for HALCYON models including: S214 10w Single Circuit Dimmable Track Spot, S214, 10w Single Circuit Dimmable Track Spot, Dimmable Track Spot, Track Spot

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 164.43KB

Document Document

FIG-1

S214

For indoor use only. Suitable for Halcyon 1 Circuit track. Testing is recommended to ensure compatibility prior to installation if retrofitting alternative manufacturer track. Take care track adaptor is orientated correctly when installing in track to avoid damage.

This luminaire must be installed by a qualified

Registered Electrician to prevent damage to the

2

ON

luminaire and maintain electrical safety.

FIG-2
Please make sure that the "Groove" on the section of track lines up with the "Groove" on the track adaptor - failure to do so can potentially damage the track adaptor and void any warranty.

TRACK GROOVE

TRACK ADAPTOR GROOVE

1

OFF

CORRECT

ON



TRACK GROOVE

ON
OFF ON
OFF

1 OFF ON 2
FIG-3

Switch to "OFF" aligned with the "  " at first, put the adaptor into the track. Then turn the knob to the position which "ON" aligned with the "  ".

WRONG

PS: Step for Removing Luminaires

X
TRACK ADAPTOR GROOVE

OFF

Turn the knob to the position which "OFF" aligned with the "  ".
355°

1.
90°

1 OFF ON 2

Take off the Adaptor from the track slantingly.
2.

1 2
VER:1.0