Home – H2O to GO is a water softening company you can trust
User Manual for H2O To GO models including: RO-50, RO-50 Reverse Osmosis System, RO-50, Reverse Osmosis System, Osmosis System, System
This manual will help you install, operate, and maintain your system effectively. 2. Product Overview. The RO-50 is a 3-stage under-sink reverse osmosis system ...
4345 W Tompkins ~ Las Vegas, Nevada 89103 Page 2 3. System Components Your RO-50 package includes: 1x RO-50 Filter System (Preassembled) 1x 3.2 Gallon Storage Tank 1x Chrome RO Faucet 1x Carbon Block Pre-Filter (Stage 1) 1x Carbon Block Post-Filter (Stage 2) 1x TFC RO Membrane (Stage 3) Color-coded Tubing (Red, Blue, White) ...
File Info : application/pdf, 4 Pages, 598.96KB
DocumentDocumentUser Manual H2O to GO's RO-50 Reverse Osmosis System 3-Stage Home Water Filtration Unit Table of Contents 1. Introduction 2. Product Overview 3. System Components 4. Installation Instructions 5. System Operation 6. Maintenance & Filter Replacement 7. Troubleshooting 8. Warranty & Support 1. Introduction Congratulations on your purchase of the H2O to GO's RO-50 Reverse Osmosis System! This advanced 3stage RO system is designed to deliver high-quality, great-tasting water right in your home by removing up to 99% of contaminants, including lead, chlorine, sediment, and more. This manual will help you install, operate, and maintain your system effectively. 2. Product Overview The RO-50 is a 3-stage under-sink reverse osmosis system designed for residential use. It provides clean drinking water through a multi-stage filtration process: Stage 1: Carbon Block Pre-Filter Stage 2: Carbon Block Post-Filter Stage 3: TFC Reverse Osmosis Membrane Output Capacity: Up to 50 gallons per day (GPD) Storage Tank: 3.2-gallon pressurized tank Faucet Included: Yes, lead-free chrome faucet Tubing: Color-coded for easy installation 4345 W Tompkins ~ Las Vegas, Nevada 89103 Page 1 3. System Components Your RO-50 package includes: 1x RO-50 Filter System (Preassembled) 1x 3.2 Gallon Storage Tank 1x Chrome RO Faucet 1x Carbon Block Pre-Filter (Stage 1) 1x Carbon Block Post-Filter (Stage 2) 1x TFC RO Membrane (Stage 3) Color-coded Tubing (Red, Blue, White) Feed Water Adapter & Shut-off Valve Drain Saddle Clamp Tank Ball Valve Filter Housing Wrench User Manual 4. Installation Instructions Tools Needed: Adjustable Wrench Phillips Screwdriver Drill (if mounting faucet) If you're unsure about installation, we recommend hiring a licensed plumber. Step-by-Step Guide: 1. Choose a Location Under the kitchen sink is ideal. Ensure space for the filter unit and tank. 2. Install the Faucet o Drill a ½" hole in your sink or countertop. o Insert faucet, tighten nut, and connect blue tubing to faucet base. 3. Connect Feed Water Valve o Turn off cold water line. o Install feed water adapter between shut-off valve and cold water line. o Connect red tubing from adapter to system inlet. 4. Install Drain Clamp o Position on vertical sink drain pipe. o Drill a ¼" hole in the pipe at marked spot. o Attach clamp and connect black tubing from system. 5. Mount the RO System o Place system upright. 4345 W Tompkins ~ Las Vegas, Nevada 89103 Page 2 o Use screws if wall mounting. 6. Connect Storage Tank o Wrap Teflon tape on tank stem. o Screw on tank valve. o Connect white tubing from system to tank valve. 7. Check Connections o Ensure all tubing is secure and color-coded correctly. o Slowly turn on water supply. 8. Flush the System o Allow the tank to fill (~23 hours). o Open RO faucet and let water run for 1015 minutes. o Repeat this flush process twice before using. 5. System Operation Once installed, the RO-50 operates automatically. When the tank is full, the system shuts off until water is drawn from the faucet. Expect ~50 GPD output, depending on water pressure and temperature. 6. Maintenance & Filter Replacement Recommended Filter Change Schedule: Filter Stage Type Change Every Stage 1 Carbon Block Pre-Filter 12 months Stage 2 Carbon Block Post-Filter 12 months Stage 3 RO Membrane 2-5 years Tip: Use the included housing wrench to remove filters easily. Sanitizing the System (Annually Recommended): 1. Shut off water supply and tank valve. 2. Remove filters and RO membrane. 3. Add 12 tbsp of unscented bleach to Stage 1 housing. 4. Reassemble and flush system (without filters) for 1520 minutes. 5. Rinse thoroughly and reinstall filters. 4345 W Tompkins ~ Las Vegas, Nevada 89103 Page 3 7. Troubleshooting Problem Possible Cause Solution Low Water Flow Clogged filter or membrane Replace filters/membrane No Water from Faucet Tank not pressurized Check tank pressure (78 psi empty) System Won't Stop Running Faulty shut-off valve Inspect valve or contact support Leaks Loose connections Tighten tubing and fittings Taste/Odor Issues Expired filters Replace filters 8. Warranty & Support The H2O to GO RO-50 system comes with a 1-year limited warranty covering manufacturer defects. Filters are not covered under warranty. Contact Us: Phone: 1-702-367-2100 Email: h2otogo@h2otogo.net Website: www.h2otogo.net Thanks for choosing H2O to GO! Your clean water journey starts now. 4345 W Tompkins ~ Las Vegas, Nevada 89103 Page 4