Installation Guide for fanvil models including: A233 Horn Speaker, A233, Horn Speaker, Speaker
26 нояб. 2024 г. — A. Drill three mounting holes suitable for M10 expansion bolts on the wall first, and the distance between the holes is 50mm.
A233 Horn Speaker Quick Installation Guide 1 Package Contents A233 horn speaker Screw and tool A233 Horn Speaker Quick Installation Guide Quick Installation Guide 2 Physical Specification Size Description 285mm *285mm*205mm 1) Panel 285 3*10 205 285 50 50 10 285 U-shaped bracket Wiring harness 2) Wiring harness D1 D0 Serial number Description Wiring port description Ethernet interface: standard RJ45 interface, 10/100M adaptive, support PoE powered, it is recommended to use CAT5 or CAT5E network cable. Power interface: DC 24V/2A input. - + The short circuit input interface: input devices for connecting switches, infrared sensor, door sensor, vibration sensors etc. The short circuit output interface: corresponding to the short-circuit input interface, login device web page settings, can be connected to electric locks, etc. 3) External device connection diagram Model 1: DC Power Ethernet switch WAN DC input Power adapter Model 2: PoE PoE switch WAN Relay in or Sensor Emergency key NCaCOM or Alarm light Electric lock Relay in or Sensor Emergency key NCaCOM or Alarm light Electric lock 23 Installation Diagram A. Drill three mounting holes suitable for M10 expansion bolts on the wall first, and the distance between the holes is 50mm. Then install the M10 expansion bolts. 50 50 B. Align the holes on the product bracket with the pre-drilled bolts on the wall, screw on the M10 nuts, and fix the product to the wall. C. Then adjust the required angle of the loudspeaker D.Power on the device,If it works normally, the installation is complete. 24 Searching IP Address The default WAN mode is DHCP, Querying the IP address with the Device Manager 25 Horn Speaker Setting Step 1: Log in the web setting page of horn speaker Input IP address (e.g. http:// 172.18.26.3) into the address bar of PC's web browser. The default user name and password are both admin. Step 2Add the SIP account Set SIP server address, port, user name, password and SIP user with assigned SIP account parameters. Select "Activate", and then click "Apply" to save this setting. Step 3Device Setting Step 4Security Settings If you need to connect other input and output devices.please set the Input and Output setting in the Security Settings A233 A233Adobe PDF library 16.07 Adobe Illustrator 26.3 (Windows)