Lifeprint User Manual

Parts & Controls

The Lifeprint printer features the following components:

• Kensington lock
• Reset button
• Charging indicator
• Micro USB charging port
• Status indicator
• Power on/off button

To charge, connect the included USB cable to the Micro USB port. Average charging time is 1.5 hours.

Indicator Status:

Inserting Photo Paper

Follow these steps to insert photo paper:

1. Slide the lid towards the back of the printer to open.
2. Unpack the included photo paper and insert it with the "blue smart sheet" facing down.
3. Replace the lid.

WARNING: Paper MUST be loaded with the blue card facing down and the white film facing up. Failure to do so could cause your printer to jam and permanently damage the product.

Power On and Bluetooth Pairing

1. Press and hold the Power button on your Lifeprint printer for 4-5 seconds until the indicator light starts blinking.
2. Open Bluetooth settings on your phone, turn on Bluetooth, and scan for Lifeprint.
3. Select Lifeprint from the list of available devices and connect.

Using the Lifeprint App

The Lifeprint app offers several features:

• ? My Media: A repository for all your photos from your camera roll and social media. Access social media accounts to print directly from those sources.
• ? PrintBox: Receive notifications and alerts when someone sends you an image. View your saved photos here.
• ▶️ Hyperphoto Viewer: An augmented reality viewer that brings your hyperphotos to life.
• ? Explore: Find new people to "Follow", see friends' activities, and discover content shared by other Lifeprint users.
• ? Profile: View what other users see when they visit your page. Manage followers and following, add/remove photos, and update profile pictures.
• ?️ Print Utility: Check your printer's current status, including paper jams, low battery, connectivity issues, or firmware updates. Access your "Printer Queue" to see jobs being prepared.

Printing Photos Privately

Lifeprint is a social network where images are shared publicly unless marked as "Private". To mark a photo as private, select the "Make Photo Private" button on the printing screen. This will prevent the photo from appearing publicly anywhere in the app. Lifeprint takes your privacy seriously; private hyperphotos are only visible if explicitly shared within the app.

Printing Hyperphotos with the Lifeprint App

1. Select an image or video from the My Media screen and tap "Print Hyperphoto".
2. Trim the video to your desired length (the free Lifeprint app allows up to 15 seconds).
3. Select a cover photo.
4. Crop and edit the photo using the app's editing tools.
5. Select the number of copies and choose whether to share the image with followers or keep it private.
6. Press the print button. A status-loading bar will appear, and your photo will print in about 30 seconds.
7. Open the Hyperphoto viewer and hold the photo up to the screen. Keep the camera still. Wait 3-5 seconds to watch your photo come to life.

Watch THIS MANUAL come to life! Hold the Hyperphoto Viewer up to the image on the front cover of this manual to watch a video about setting up Lifeprint. The cover of this manual is also a hyperphoto!

Device Compatibility

Lifeprint is compatible with many iPhone and Android phones, but not all. Please visit www.lifeprintphotos.com/compatibility to see if Lifeprint is compatible with your device.

The "Made for iPhone" designation indicates that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Use of this accessory with iPhone may affect wireless performance.

Support and Compliance

If you encounter any issues, please visit the support page at www.lifeprintphotos.com/support for FAQs and video instructions. For further assistance, contact support@lifeprintphotos.com.

This device complies with IMDA Standards DA107035.