User Manual for creality models including: 8bit32 BL Touch Guidebook, BL Touch Guidebook, Touch Guidebook
8 bit 32 bit 1. Double-click to open computer-right-click to format SD card. 2. Copy the firmware to the SD card. Note: the SD card only holds one firmware file.
V.1.4 Apply to 8-bit | 32-bit motherboards. 8 bit 8 bit Creality V1 Mainboard 32 bit 32 bit Ender-x xxxxxx-vxxx-BLTOUCH 1. Double-click to open computer-right-click to format SD card. Ender-x xxxxxx ... Note: Every firmware files is different for every machine 2. Copy the firmware to the SD card. Note: the SD card only holds one firmware file. 3. Insert SD card. 4. Insert the power cord and press the switch. 5. Wait for the brush firmware to complete (about 10 seconds). 8 bit 32 bit 8 bit Note: The actual sequence of operation depends on the machine model. 32 bit rotate the knob until the distance between them is about 0.2mmas a sheet of A4 paper). 2. Select control. 3. Select Bed leveling. 4. Select Level Bed. 5. leveling 9 points 6.9 points leveling completed 7.automatic leveling is completed, the machine is ready to be OK Note: Every machine has its own operation interface.Adobe PDF library 15.00 Adobe Illustrator CC 22.0 (Windows)