User Manual for MONSTER models including: MNTRAX, 2AAIN-MNTRAX, 2AAINMNTRAX, MNTRAX Bluetooth Speaker, Bluetooth Speaker, Speaker

Monster TRAX Manual outlined 02

user manual

ACOUSTMAX INTERNATIONAL CO., LTD MNTRAX MONSTER TRAX 2AAIN-MNTRAX 2AAINMNTRAX mntrax

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 13 Pages, 5.57MB

Document Document

TABLE OF CONTENTS

PRODUCT CONTROLS
POWER
Charging Power
AUDIO
Bluetooth® Pairing Bluetooth® Audio Functions EZ-Sync Pairing
FEATURE
Call Connectivity
NOTES

1

SPECIFICATIONS

4

TROUBLESHOOTING

1

IMPORTANT SAFETY

INSTRUCTIONS

5

LIMITED WARRANTY

6

1-2

WARNING STATEMENTS

7

2

3 3

PRODUCT CONTROLS

Controls & LED Lights

Port

Power
1 Turn the unit ON, press
and hold the POWER Button (2) for 2 seconds.

(Hold 2 Sec.)

12 3 4 5 6 7

8

1. Microphone 2. Power Button 3. Power LED (Red) 4. Decrease Volume Button 5. Increase Volume Button

6. Bluetooth®/ EZ-Sync LED (Blue/Orange)
7. Bluetooth®/ EZ-Sync Button
8. Type-C USB Charge Port

· Turn the unit OFF, press and hold the POWER Button (2) for 3 seconds.

(2 Sec. then Off) (Hold 3 Sec.)

Full Charge­ Up to 5 hours while powered OFF. ­ Up to 12 hours while powered ON.

AUDIO

POWER

30 feet max connection range after pairing. Devices out of range may suffer disruption or loss of signal.

IMPORTANT:
Charging
1 CONNECTthe charge
port (8) to an external power source using the included USB cable.
· CHARGING, RED LED (3) breaths on and off slowly.
· LOW 20% RED LED repeatedly flashes.
· FULLYcharged, RED LED will stay on.

5
(Breaths On/Off) (Flashes) (Stays On)

Bluetooth Pairing
1 Place your smart
device within 3 FEET from the speaker.
Bluetooth®
2 The speaker will
automatically enter into Bluetooth® Mode and LED (6) will begin to blink when turned on.
3 Select "MONSTER
TRAX" from the Bluetooth® menu on your smart device.

3 Ft.
(Blinking) MONSTER TRAX

CONT. AUDIO

Bluetooth Pairing Cont.
(6) will
· UNPAIR device,
press and hold the BLUETOOTH® Button (7) for 2 seconds.
(6) will
Bluetooth Audio Functions
· PLAY/PAUSEmusic, press
BLUETOOTH® (7) button.
· Select NEXT track,
press and hold INCREASE VOL. (5) button for 2 seconds.
· Select PREVIOUS
track, press and hold DECREASE VOL. (4) button for 2 seconds.

(Stays On) (Hold 2 Sec.)
(Blinking)
(Press) (Hold 2 Sec.) (Hold 2 Sec.)

EZ-Sync Pairing

1 BLUETOOTH® PAIR

one TRAX to be the

A

MASTER (A).

®

2 TURN-ON second

TRAX, place it in

A

close proximity to the MASTER (A).

3 MASTER (A), Double-

Click BLUETOOTH®

A

Button (7), entering EZ-

Sync search mode.

®
B
(Press x2)

4 Once PAIRED,
(A) speaker's BLUETOOTH® LED (6) will remain Blue and (B) speaker's LED (6) will
stay on in Orange.

"Synchronized"

A

B

(Solid Blue)

(Solid Orange)

"Synchronized" "Synchronized"

· UNPAIR speakers,
Double-Click BLUETOOTH® Button (7) of either unit.

A or B

(Press x2)

A
(Solid)

B
(Flashing)

FEATURE
Call Connectivity
1 ANSWER phone calls
while connected to Bluetooth by pressing the BLUETOOTH® Button (7).
· REJECT phone calls by
pressing and holding the BLUETOOTH® Button (7) for 2 Seconds.

NOTES
(Press) (Hold 2 Sec.)

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.