User Manual for super bright LED models including: FLCU-X1 Series, LED Flood Lights, Flood Lights, LED Lights, Lights, FLCU-X1 Series


File Info : application/pdf, 2 Pages, 713.95KB

PDF preview unavailable. Download the PDF instead.

FLCU-X1 User Manual
User Manual

Important: Read all instructions prior to installation.
LED Flood Lights

FLCU-X1 Series
Safety and Notes
· Product should be installed and serviced by a certified electrician in accordance with applicable national, state, and local building and electrical codes.
· To reduce the risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation or wiring procedures.
· Avoid looking directly into lamp when illuminated. · Ensure all mounts are securely attached and will support the
weight of the fixture. Failure to properly support fixture may result in damage or injury, for which the manufacturer does not assume responsibility.

FLCU-X1-50K150-SV
Specifications

Specifications Operating Temperature
IP Rating Fixture Weight

FLCU-X1-50K100-SV 6.5 lb (2.9 kg)

FLCU-X1-50K150-SV

FLCU-X1-50K200-SV

-22°­113° F (-30°­45° C)

IP66

8.5 lb (3.9 kg)

12.8 lb (5.8 kg)

Check product label for specific electrical specifications related to installation. Improper installation will void warranty.

Wiring Diagram

Line Neutral Ground
Dim (+) Dim (-)

120­277 VAC Input

L

L

N

N

GND GND

Black White Green

1­10 V Dimming

+

+

-

-

Purple Gray / Pink

FLCU-X1-50K240-SV 13.1 lb (5.9 kg)

Rev Date: V1 03/21/2022 4400 Earth City Expy, St. Louis, MO 63045

866-590-3533

superbrightleds.com

Important: Read all instructions prior to installation.
LED Flood Lights
Installation Instructions

User Manual
FLCU-X1 Series

1. Use the mounting bracket to mark the mounting surface and drill holes as needed.

2. Place studs in holes with a loosely threaded nut on the end or place bolts into the holes without fully tightening.

3. Place the mounting bracket over the bolts/studs and push it flush with the wall, then tighten the nuts/bolts.

adjustable angle 180°
4. Loosen adjustment screws. Rotate the light to the desired angle and tighten screws.

Rev Date: V1 03/21/2022 4400 Earth City Expy, St. Louis, MO 63045

866-590-3533

superbrightleds.com



References

Adobe PDF Library 16.0.5 Adobe InDesign 17.1 (Windows)