HC-01 Wireless Charger Stand
Product Introduction
The HC-01 headphone stand is an intelligent product compatible with wireless charging. It features a minimalist, stable, and convenient design. The wireless charging function is specifically designed for HM-01 true wireless headphones, offering a plug-free, convenient, and efficient charging experience that provides an unlimited life experience and a safe, free experience.
Product Outline
Universal Compatibility
- Only supports earisMAX wireless charging function
- Supports all headphones as a stand application (*Notice: Wireless charging not supported)
Instructions
- Insert one end of the USB charging cable into a power adapter.
- Insert the other end of the USB charging cable into the USB port of the wireless charger. The LED indicator will light up to indicate connectivity.
- Place your headphones on the wireless charger, ensuring they are well-located at the charging area. When the headphones are being charged, the LED indicator will light up automatically to show charging status.
Indicator Light Status Description
| Description | Indicator Light Color |
|---|---|
| Not connected to power or headphones removed from wireless charger or fully charged | No lights |
| Connect the power socket charging | The purple light stays on for 3 seconds |
| Charge Complete | The blue light stays on for a long time |
| Error | The green light will stay on for 60 seconds and then turn off |
| Error | Red light flashing fast |
Accessories List
- Wireless charger × 1
- Type-C cable × 1
- User Manual × 1
- Warranty card × 1
Product Specification
Input Voltage: 5V
Output: 1.5W
Operation Frequency: 160 KHz–2402–2480 MHz
Working Principle: Magnetic Resonance
Working Temperature: -10°C–45°C
Storage Temperature: -40°C–70°C
Attention
- Please keep the charger away from water or other liquids.
- If you need to clean the charger, please ensure it is not connected to the power supply.
- Using environment temperature remains -10°C–45°C.
Regulatory Compliance
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
Industry Canada (IC) Compliance
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
CE Marking and EU Regulatory Conformance
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d = 20 cm between the device and the human body. To maintain compliance with RF exposure requirements, use product that maintains a 20 cm distance between the device and human body.
This product can be used across EU member states.
Hereby, Adec & Partner AG declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the website XXXX.com/certificatio.
XXXX