Makita Power Tool Accessories Catalog

Safety First

Always prioritize safety when using power tools and accessories. Key safety recommendations include:

• Wear Eye Protection ?️
• Wear Ear Protection ?
• Wear Protective Gloves ?
• Wear Protective Shoes ?
• Remove Plug From Socket ?
• Read the Instruction Manuals ?

Materials Compatibility

Makita accessories are designed for a wide range of materials, including:

• Masonry: Concrete, Reinforced concrete, Brick, Limestone, Aerated concrete, Concrete block, Soft brick
• Wood: Wood, Wood Chipboard, Wood with nails, MDF, Plywood
• Metal: Metal, Aluminum, Sheet metal, Stainless steel, Metal stud, Cast iron, Non-ferrous metals
• Other: Glass, Fiber reinforced plastic, Epoxy, Soft Tile, Plaster board, Carpet, Removing paint, Insulation

System Charts & Technology Highlights

Makita's accessories are engineered for optimal performance, especially with their DC (Direct Current) and XGT (40Vmax) tool systems. Key technologies and features include:

• DC Tool Accessories: Designed for greater performance, higher speed, and more work per charge. Look for the DC tool icon with an emphasized battery symbol.
• XGT Battery Series: A system combining innovative tool design with high-output batteries for demanding industrial applications. Features digital communication between tool and battery for optimum power and charging.
• High Output Battery Series (BL4040F, BL4050F, BL4080F): These batteries unlock full power potential and demonstrate tenacity under heavy load, offering improved efficiency and performance compared to standard batteries.
• TCT Saw Blade EFFICUT Series: Features sharp tip angles, curved bodies, and slimmed bottoms for increased cutting amount per charge, reduced resistance, and less chipping.
• Diamond Wheels: Specialized designs for specific materials like concrete, tile, and stone, offering features like thin blades, corrugated rims, and vacuum brazing for enhanced performance and durability.
• Four-Leaf Line (for Chainsaw Chains): A design that reduces noise and saves energy through less air resistance, improving cutting amount per charge.

Drilling Accessories

Drilling (Wood/Metal)

Makita offers a comprehensive range of drill bits for wood and metal, including:

• HSS Metal Drill Bits: Available in various series (HSS-R, HSS-TiN, HSS-G, HSS-GS, M-force, HSS-Co) with different coatings and tip geometries for specific applications. Features include roll-forged manufacturing, TiN coating for durability, and 135° split points for fast starts. Available in single bits, sets, and assortments.
• Step Drill Bits: Designed for drilling holes in thin metal sheets, plastic, and wood, featuring straight or spiral flutes and titanium coating for enhanced performance.
• Countersink Bits: Available with 3, 5, or 7 cutting edges for various applications, including flush countersinking.
• Broach Cutters: For magnetic drilling machines, available in short (25mm depth) and long (50mm depth) versions.
• Wood Drill Bits: Includes Flat Bits, Brad Point Drill Bits (for precise holes), Single Spur Auger Bits (for fast drilling), Ship Auger Bits (for deep holes), and Formwork Drill Bits (long overall length for formboard and timber).
• Hole Saws: Bi-Metal (BiM) and TCT (Tungsten Carbide Tipped) hole saws for cutting various materials like metal, wood, and plastic. Vacuum brazed diamond hole saws are available for hard materials.

Drilling (Masonry)

T.C.T. (Tungsten Carbide Tipped) drill bits for SDS-PLUS and SDS-MAX hammers are available for drilling into concrete, brick, stone, and other masonry materials. Features include:

• Centering Tips: For stable and secure drilling.
• 4-Cutter and Nemesis II designs: For faster drilling and improved durability, especially when encountering rebar.
• Dustless options: For cleaner working environments.
• Chisels: A variety of chisels including Bull Point, Cold Chisel, Grooving Chisel, and Scaling Chisels for demolition, breaking, and channeling work in masonry and concrete. Available for SDS-PLUS, SDS-MAX, and 17mm/21mm/28.6mm/30mm Hex shank hammers.

Fastening Accessories

Makita provides a wide array of bits and accessories for fastening applications:

• Screw Bits: Available in C-form and E-form shanks, single-ended, double-ended, and impact-rated versions (Impact BLACK, Impact PREMIER). Features include magnetic bit holders, flexible bit holders, and torsion bits for enhanced durability and performance.
• Nutsetters: Magnetic nutsetters for efficient fastening.
• Impact Sockets: Available in various drive types (3/8", 1/2", 1") and sizes, including deep sockets and impact socket sets for use with impact wrenches and drivers.
• Bit Holders: Magnetic and flexible bit holders designed to improve access and screw-driving efficiency.

Cutting Accessories

T.C.T. Saw Blades

Makita offers T.C.T. (Tungsten Carbide Tipped) saw blades for various cutting applications, featuring different tooth shapes (ATB, ATBR, Hi-ATB, ATAF, ATAFR, FTG, TCG) optimized for specific materials and cutting styles. Key features include:

• Tooth Shapes: Optimized for wood, aluminum, metal, composite decking, and more, ensuring sharp cuts, reduced resistance, and durability.
• Blade Features: Laser slits for vibration dampening, PTFE coating to reduce pitch build-up, inserted tooth design for strength, and PCD tips for extreme hardness and wear resistance (especially for fiber cement board).
• Ideal for Cordless Tools: Many blades are designed to maximize cuts per charge on Makita's cordless circular saws, plunge cut saws, metal cutters, and slide compound saws.
• Material Specialization: Blades are available for wood, MDF, laminate, metal, stainless steel, aluminum, composite materials, and sandwich panels.

Jigsaw / Reciprosawing Blades

A wide selection of jigsaw and recipro saw blades made from HCS (High Carbon Steel), HSS (High Speed Steel), BiM (Bi-Metal), and TC (Tungsten Carbide) for various cutting tasks:

• Tooth Types: Milled, ground, wavy set, and side set teeth for different cutting speeds and finishes.
• Blade Materials: Selected for specific applications, from soft wood and plastics (HCS) to hard metals and tough plastics (HSS, BiM), and fiber cement board (TC).
• Specialized Blades: Includes splinter-free cut blades, blades for hardwood/decorative veneers, metal cutting blades (basic and heavy duty), and blades for ice/frozen material.
• Recipro Saw Blades: Designed for fast cutting of metal, wood, plastic, and composite materials, available in various lengths and tooth pitches.
• Board Cutter Blades: For plasterboard and wood.
• Band Saw Blades: Available for various materials and cutting types (wood, plastics, metal).

Brushing Accessories

Makita offers various brushes for cleaning, rust removal, paint removal, and surface conditioning:

• Wire Brushes: Available in cup, wheel, and end types, made from steel (crimped or knotted) or stainless steel. Suitable for light rust removal, heavy-duty cleaning, and working on various surfaces.
• Nylon Brushes: Available in coarse and fine grits for general cleaning and surface finishing.
• Diamond Polishing Pads: For polishing stone, marble, and granite.
• Wool Pads and Bonnets: For polishing and finishing applications.
• Sponge Pads: For polishing and surface conditioning, available in flat and wave types.

Bonded Abrasive Wheels

A range of grinding and cut-off wheels for metal, stainless steel, and masonry applications:

• Grinding Wheels: Available in depressed center and flat types, made from various abrasive materials like Aluminum Oxide (A, SA, WA), Alumina Zirconium (Z), and Ceramic for different grinding performance levels.
• Cut-Off Wheels: Ultra-thin cut-off wheels (0.8mm, 1.0mm, 1.2mm) designed for fast cutting, reduced burr, and longer life, especially ideal for cordless angle grinders.
• Flexible Grinding Wheels: Offer low vibration and improved workability, increasing the amount of grinding per charge.
• Tungsten Carbide Burrs: For cutting and deburring metal and non-ferrous materials.
• Wheel Points: For bench grinders and straight grinders.

Coated Abrasive Discs and Belts

Abrasive discs, belts, and pads for sanding, surface conditioning, and polishing:

• Flap Discs: Available in Aluminum Oxide (A) and Zirconia Aluminum (Z) grains, with fiberglass or nylon backing, for grinding and surface conditioning of metal and stainless steel.
• Strip Discs: For stripping paint, rust, and weld discoloration.
• Net Sanding Discs: Feature less clogging and high sanding efficiency, available with pad savers for protecting the backing pad.
• Fiber Sanding Discs: For grinding, chamfering, and deburring metal and stainless steel.
• Abrasive Belts: For belt sanders, available in various grits and sizes for wood and paint applications.
• Sanding Pads and Felts: For polishing and finishing, available in various grits and types.

Multi-Tool Accessories

Makita offers a wide variety of blades and accessories for multi-tools, designed for precise cutting, plunge cutting, scraping, and sanding across multiple materials:

• Saw Blades: Segment saw blades, plunge cut saw blades (including bow shape and TC bar types), and universal purpose knives for wood, metal, multi-material, grout, and abrasive applications. Blades are available in BiM, HCS, TC/HM, and Stainless Steel materials.
• Scrapers: Rigid and flexible scrapers for removing mortar, tile adhesive, carpet adhesive, and silicone joints.
• Sanding Accessories: Delta papers, sanding pads, plates, and pointers for wood, paint, stone, and multi-material applications, available in various grits.
• Set Assortments: Specialized sets like Tile Set, Floor Set, Plunge Cut Set, and Carpentry Set provide a curated selection of blades for specific tasks.

Diamond Accessories

Makita's diamond accessories are engineered for cutting and grinding hard materials like concrete, tile, stone, granite, and glass:

• Diamond Wheels: Available in various types including Segmented, Segmented Wave, Corrugated, Continuous Rim, Electrodeposited, and Vacuum Brazed for different cutting speeds, finishes, and material compatibilities. Specialized wheels for concrete, stone, tile, glass, and metal are offered.
• Diamond Core Bits: For SDS-PLUS hammers and grinders, designed for dry drilling in granite, marble, and porcelain tile.
• Offset Diamond Wheels: For rough work, standard work, fine work, and specialized applications like paint removal. PCD (Polycrystalline Diamond) wheels offer superior hardness and durability.
• Vacuum Brazed Diamond Wheels: For cutting various materials with less spark.

Planing / Routering Accessories

Makita provides router bits and planer blades for woodworking and shaping applications:

• Planer Blades: High-speed steel (HSS) for fine cuts and Tungsten Carbide (TC) for higher durability, suitable for hard wood. Available for various Makita planer models.
• Router Bits: A comprehensive range including Straight Bits (1 and 2 flute, with or without bearings), Flush Trim Bits, Panel Pilot Bits, Core Box Bits, Ovolo Bits, Round Nose Bits, Roundover Bits, V-Groove Bits, Beading Bits, Roman Ogee Bits, Cove Bits, Classic Panel Bits, Cove with Fillet Bits, Dovetail Bits, and Slotting Cutters. Available in HSS and Carbide materials with various shank diameters and cutting profiles.
• Router Bit Sets: Available in 12-piece and 3-piece sets for convenience.

Outdoor Power Equipment (OPE) Accessories

Makita offers a wide array of accessories for their outdoor power equipment, including chainsaws, trimmers, blowers, and edgers:

• Earth Auger Drill Bits: For drilling holes in soil, suitable for tree planting and pile driving, available in various diameters and lengths with optional extensions and replacement blades.
• Brushcutter Blades: Includes Nylon Cord (various types like Four-leaf for low noise/energy saving), Metal Blades (2-tooth, 4-tooth, 8-tooth), Shredder Blades, Saw Blades (TCT for tough bushes), and Edger Blades.
• String Trimmer Heads: Quick loading heads (Bump & Feed, Ultra Auto) for efficient line feeding and various cord sizes.
• Chainsaw Accessories: Guide bars, saw chains (Oregon types like 91VXL, 90PX, 80TXL), bar covers, drive sprockets, and files for maintenance. Chains are available in various pitches, gauges, and cutter types (CC, SC, MC, FC).
• Multi-Tool Attachments for OPE: Including Grass Trimmers, String Trimmers, Brushcutters, Hedge Trimmers, Pole Saws, Power Sweeps, Coffee Harvesters, and Blowers that can be attached to multi-function power heads.
• Protection Guards and Spools: For safety and ease of use with trimmers and brushcutters.

Miscellaneous Accessories

This section covers a variety of other useful accessories:

• Drill and Screw Bit Sets: Assortments containing various drill bits (masonry, wood, metal) and screw bits, often including bit holders and storage cases.
• Bonded Abrasive Wheels: Grinding and cut-off wheels for metal, stainless steel, and masonry.
• Coated Abrasive Discs and Belts: For sanding, surface conditioning, and polishing wood, metal, and paint.
• Diamond Accessories: Wheels and core bits for cutting and grinding hard materials.
• Planing / Routering Accessories: Router bits and planer blades for woodworking.
• Outdoor Power Equipment (OPE) Accessories: Blades, trimmer heads, chainsaws, and attachments for outdoor tasks.
• Chainsaw Accessories: Guide bars, saw chains, sprockets, and files.