User Manual for OMCONNECT models including: K12 Smart Key Box, K12, K12 Key Box, Smart Key Box, Key Box, Smart Box

User Manual V1.0-K12-EN

KK lees

User Manual V1.0-K12-EN

PDF User Manual V1.0-K12-EN - OMCONNECT

01/16 02/16 Specification Model Unlock Mechanism Battery Material K12 Body Zinc Alloy, SUS304 4 x AAA Alkaline Battery Bluetooth, PIN Code, App Front Inside Back

User Manual V1.0-K12-EN - OMCONNECT

PDF preview unavailable. Download the PDF instead.

1-210Q01H345120
K12 USER MANUAL V1.0

What's Included

0
1 2 3 4

9
8 7 6 5

1 x KeyBox

HELLO
1 x HELLO Card

2 x Screw Cap

2 x Mounting Screws

2 x Screws Anchors

1 x Reset Tool

01/16

Specification
Model Material Battery Unlock Mechanism Jump Start
Front

K12 Body Zinc Alloy, SUS304 4 x AAA Alkaline Battery Bluetooth, PIN Code, App USB-C
Inside

Back

0
1 2 3 4

9
8 7 6 5

120mm ( 4- 7/10`'

Depth 22mm ( 4/5 `' )

120mm ( 4- 7/10`'

120mm 4-7/10''

120mm 4-7/10''

02/16

Features
Lock&Unlock
Administrator Unlock Set a Master Administrator PIN for Unlocking, settings, operations etc. and only the administrator could change the administrator PIN code.

....... User Unlock
This KeyBox allows to add up to 100 user PIN codes for your family, friends and visitors.

Anti-peeping
Add up to 10 digits before and after PIN code to intensify your PINs.

Auto Locking
If there are no opening motions in 10 seconds the box will be automatically locked.

Mobile Control
Bluetooth one-touch unlock With your Mobile you could unlock the KeyBox by tapping the " " on the App.
Mobile Administrator Set Administrator PIN Codes from your Mobile to unlock, add users, delete users, etc.

Offline Unlock
You could generate offline code through mobile App, for scheduled access, parcel delivery, housekeeping, etc.

A A A A A A A A A A A A

Battery
Battery Life 4 AAA batteries, the life cycle will be more than 12 months, please use good batteries.
Low Consumption BLE broadcasting turns to sleep mode if no operations.
Emergency
Jump Start When the power is down and use USB-C to jump start the lock and get it unlocked

Low Battery When the battery runs out of power, system will remind you to replace the batteries.
System Lockdown The lock will be lockdown for 5 minutes if continuously enter wrong PINs for 5 times.

03/16

Quick Start
Step 1>Install Battery >. Remove the battery cover
>. Insert 4 x AAA batteries into the battery dock.
04/16

AAA AAA

A A A A A A

Step 2>Download Mobile App
>1. Scan QR Code below and download the App and turn on your mobile Bluetooth
Step 3>Add Device
>1.Go to App Home page, click Add Device or click "+" on the upper right.
05/16

> 2. Press the "Reset" button and hold it for 3 beeps to start pairing Use The Reset Tool
06/16

>3. You will see the detected device and click "Go to add".
07/16

>4. Connecting, you need to wait for few seconds to let it finish. >5. Device added
08/16

Step 4>Change Admin Password-Initial Admin Password:123456
>1. Press and hold for 3 beeps

0 1 2 3

Enter

4

5

9 8 7 6

>2. Right after the 3 beeps please key in: Initial Admin Password(123456) + +New Admin password+

09/16

Mechanical Instructions
Password & Factory Mode:
1. Password Length Password must be 6 digits (no more no less) 2. Add User PIN Press and hold for 3 beeps, Admin PIN + + user PIN + + user PIN + 3. Delete User PIN  + 2 + , Admin PIN + PIN to be deleted + 4. Delete All User PINs  + 00000 + + Admin PIN and wait for 3 seconds 5. Virtual digits-Anti Peeping Add any digits before and after the correct password the KeyBox unlock as always 6. System Lockdown KeyBox will Lockdown for 5 minutes if entering wrong password continuously 5 times 7. Reset Factory Mode Press and hold the reset button for 5seconds and with a long beep
Bluetooth broadcasting & re-connecting:
Press and hold the reset button for 3 beeps, you will be able to pair the device. Bluetooth broadcasting will turn to sleep mode if no operations within 1 minute. Press any key to activate the Bluetooth, App&Device will get reconnected each other.
10/16

App Instructions
You will see all devices and rooms on the home page. Tap the Device to start operating. Tap "Me" at the bottom to manage your home.
Touch the lock sign to unlock and lock. Tap "Bell" sign to check the alarm records. Tap "Member Management to add or delete members. Tap "opening record" to check opening logs. Tap "Intelligent Linkage" to turn on and off go home mode. Tap "Set" to manage passwords
11/16

Tap "Get dynamic code" to get a code. Tap "copy code" and send it to friend or family. Tap "Pen" sign to edit your personal information.
Go to "Members" to add family or other members
12/16

Tap "+" to add family member or other members Tap " Add it now" under Family to add family members.
13/16

Owner need to complete the Home information before adding any family member if required The member need to be registered to the App before adding as a family member
Fill up member information and set the role of the member Tap "Save" to complete and the member will be able to operate the device on his App
14/16

Go to "Opening Logs" to check the unlocking history With this feture you will be able to find out when and who unlocked the KeyBox
Go to "Intelligent Linkage" to set more smart functions Tap the green bar to turn on "Family go home"function. Tap the orange bar to turn on "Door lock alarm"function You will get notification if user unlocked with Bluetooth Go to "me" homepage and got to message center to check the records.
15/16

Tap "Member" to add or remove codes. Tap "Temporary Code" to manage online and offline codes.
Tap "one-time code" under Online Code to set an online one time code.
Tap "periodic Code" under Online Code to set a online code which will be available in a period of time.
Tap "One-Time Code" under Offline Code to generate a one time offline code which will be a 10 digits code and use it when the device is offline.
Tap "Offline Temporary Code" under Offline Code t generate an offline code (10 digits) which will be available in a period of time, and use when the device is offline or Bluetooth disconnected with device.
Tap "Clear Code" to generate a code (10 digits) which is able to clear Codes that need to be invalid or clear all codes.
Please note if the code less than 10 digits you need to regenerate a new code, the code must be 10 digits.
16/16

OMCONNECT
Designed in France Made in China
Copyright © 2020 OMFOCUS TECH. All rights reserved.
13


Adobe PDF library 15.00