KVM Solutions - Technology leader made in Germany – IHSE
抱歉，站点已暂停
Home - IHSE
Kvm-tec.com: KVM Extender over IP - Matrix Switching Systeme
Instruction Manual for kvm-tec models including: KT-8122 Full HD KVM Extender Over IP, KT-8122, Full HD KVM Extender Over IP, Full HD KVM Extender, KVM Extender, Extender
Kvm-tec.com: EASYline - Full HD KVM Extender over IP
File Info : application/pdf, 4 Pages, 1.90MB
DocumentDocumentkvm-tec First Aid masterEASY No Power (No LED) USB is not working No Video Video error (stripes in the picture) Check the powerplug Is the power supply ok? Try another Unit. Contact kvm-tec support Are the USB Devices plugged in correctly? Is the USB cable on the Local side plugged into the PC? Are the USB Devices working directly on the PC? Replace the USB cable from PC to the Local Extender Check if local and remote Unit have the same firmware Check if the local or the remote Unit is causing the problem by swaping first the local and than the remote Unit to another Unit Check if all cables are plugged in correctly Check if the PC is sending a Image by plugging in a monitor on the local out of the local Unit Check if the DDC is set correctly (in menu under point ,,O") Check if all cables are plugged in correctly Check if the PC is sending a Image by plugging in a monitor on the local out of the local Unit Check if the DDC is set correctly (in the menu under point ,,o") Check if both Units have the correct firmware Check if local and re- mote Unit have the correct firmware Contact kvm-tec support Check if the network switch is setup correctly and has enough bandwidth Check if other units have the same behaviour kvm-tec Support support@kvm-tec.com Phone: +43 2253 81912 - 30 Contact kvm-tec support Contact kvm-tec support We are here for you to answer your questions about installation? Manual download www.kvm-tec.com or kvm-tec Installationchannel on our homepage personally +43 2253 81912 Misprints, errors and technical changes reserved Check out our Installation Channel: Eamsayster FULL HD - KVM EXTENDER OVER IP Tune in the easy KVM World · masterEASY Dual in copper Art Nr KT - 8122 www.kvm-tec.com Quick Instructions V102022 DVI in 2 from PC DVI in 1 from PC USB to PC Audio from PC Audio to PC USB from Keyboard and mouse Audio from microphone Audio to speaker Power plug 12V 1A Power plug 12V1A redundant Öpen OSD menu The OSD main menu is opened with the standard shortcut: 5 x ALT Gr (Attention: the first 20 seconds 5 x Scroll always works, in case the shortcut was forgotten.) Switching list : CTRL+ALT+PRINT Changing the shortcuts in the OSD menu Go to the Remote Settings and then navigate to Keyboard Shortcut. Power plug 12V 1A Power plug 12V 1A (redundant) DVI to Monitor 1 DVI to Monitor 2 Delivery Content LOCAL/CPU Unit 1 x ME2-F local (CPU) 1 x wall power supply 12V 1A INT or (EU-plug) 2 x DVI - DVI cable 1,8m/5,9ft 2 x VGA -DVI cable 1,8m/5,9ft opt 2 x Audio cable 1,8m/5,9ft opt 1 x USB cable 1,8m/5,9 ft 4 x rubber feets REMOTE/CON Unit 1 x ME2 remote (CON) 1 x wall power supply 12V 1A (INT or EU-plug) 4 x rubber feets Network cable CAT5e/6/7/ up to 150m/492ft - main link Network cable CAT5e/6/7/ up to 150m/492ft Quick Installation masterEASY Dual local / CPU remote / CON 1. Connect the CON / Remote and the CPU / Local Unit to the included 12V 1A power supply. 2. Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU / Local Unit. Connect keyboard and mouse to the CON / Remote Unit. 3. Connect the CPU / Local and the CON / Remote Unit with a network cable. 4. Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local Unit (PC-in). 5. Connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CON / Local Unit (PC-in 2). Then connect the monitor to the CON / Remote Unit using the DVI cable. 6. Opt: Connect PC Audio out with the audio cable to local audio/in. Connect audio/out via the audio cable 7. Almost done! Opt: Connect the audio cable local audio/out to the PC audio/in and remote audio/out with audio cable to the microphone 8. If you are using a switch: Connect all endpoints to the switch. Ensure that all connections have a bandwith of 1Gbit/sec. For video sharing the network has to support IGMP snooping ( Switch Layer3) HAVE FUN - your kvm-tec Extender is now in use for many years (MTBF approx 10 years) Misprints, errors and technical changes reserved ACCESS TO MAIN MENU Use the monitor and the keyboard to access the main menu Access to the main menu. 1. make sure the extenders, monitors, and computers are turned on. 2.Press the Scroll Lock button five times quickly. The main menu and an overview of the submenus are displayed. 3.To enter a submenu, press the corresponding key. DISPLAYING THE FIRMWARE VERSION Make sure that the main menu is open. Under ,,A" - About the currently installed firmware version of the remote (CON) and local (CPU) extender is displayed FEATURES Press the F key to enter the Features menu. Switching mode is set by default Main meu Short Cuts : S Status Overview U Update Flash FW F Features Overview D DDC Option L Local Settings R Remote Settings A About Overview Key ,,Esc" Menu Status / current Status Firmware update Settings Features DDC Option Fix Settings Local Settings Remote Exit Misprints, errors and technical changes reserved FRONTBRIDGING HARDWARE: 1 X DUAL LOCAL + 2 X SINGLE REMOTE The ,,Status Menu" displays the current status of the extender connection. The menu shows the information about the connection, the resolution of the video channel and the USB status. The link status shows if a connection is possible. Connected shows if the kvm files can currently be transferred. Video and USB show if data is currently being transferred BACKBRIDGING HARDWARE: 1 X DUAL LOCAL + 2 X SINGLE REMOTE The ,,Status Menu" displays the current status of the extender connection. The menu shows the information about the connection, the resolution of the video channel and the USB status. The link status shows if a connection is possible. Connected shows if the kvm files can currently be transferred. Video and USB show if data is currently being transferred Single Misprints, errors and technical changes reserved KVM-TEC Gewerbepark Mitterfeld 1 A 2523 Tattendorf Austria www.kvm-tec.com KVM-TEC ASIA IHSE GmbH IHSE USA LLC IHSE GMBH Asia IHSE China Co.,Ltd p +9173573 20204 Benzstr.1 1 Corp.Dr.Suite 158Kallang sales.apac@kvm-tec.com 88094 Oberteuringen Cranburry NJ 08512 Way,#07-13A Room 814 Building 3, Kezhu Road KVM-TEC CHINA - P + 86 1360 122 8145 chinasales@kvm-tec.com www.kvm-tec.com Germany www.ihse.com USA 349245 Singapore Guangzhou PRC www.ihseusa.com www.ihse.com www.ihse.com.cn