robustel R5020 5G WiFi Wireless Router Instruction Manual

Instruction Manual for robustel models including: 2AAJGR5020, R5020, R5020 5G WiFi Wireless Router, 5G WiFi Wireless Router, WiFi Wireless Router, Wireless Router, Router

Windows 用户

RT

User Manual

Guangzhou Robustel Co., Ltd. R5020 2AAJGR5020 2AAJGR5020 r5020

Users Manual

File Info : application/pdf, 11 Pages, 784.59KB

GetApplicationAttachment.html?id=6219298

Robustel R5020 Hardware Manual
R5020
Hardware Manual

Version: 1.0.0 Date: July 6, 2022

RT064_HM_R5020

1/11

Robustel R5020 Hardware Manual
Regulatory and Type Approval Information Table 1: Toxic or Hazardous Substances or Elements with Defined Concentration Limits

Name of Hazardous Substances the Part (Pb) (Hg) (Cd)

(Cr(VI)) (PBB)

(PBDE) (DEHP) (BBP)

(DBP) (DIBP)

Metal parts

Circuit modules

Cables

and cable assemblie

Plastic

and polymeric

parts

Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is

below the limit requirement in RoHS2.0.

Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials for this

part might exceed the limit requirement in RoHS2.0.

Indicates that it does not contain the toxic or hazardous substance.

Radio Specifications RF technologies

3G, 4G, 5G, GNSS*, Wi-Fi

Cellular Frequency*
Wi-Fi Frequency Max RF power

3G: WCDMA: B1/B2/B3/B4/B5/B6/B8/B19 4G: LTE FDD: B1/B2/B3/B4/B5/B7/B8/B12(B17)/B13/B14/
B18/B19/B20/B25/B26/B28/B29/B30/B32/B66/B71 LTE TDD: B34/B38/B39/B40/B41/B42/B43/B48 LAA: B46 5G: NSA/SA: n1/n2/n3/n5/n7/n8/n12/n20/n25/n28/n38/n40/
n41/n48*/n66/n71/n77/n78/n79 2.4 GHz: 2.412 - 2.472 GHz 5 GHz: 5.15 - 5.825 GHz 28 dBm@5G, 25 dBm@WCDMA, 28 dBm@LTE, 22.96dBm@Wi-Fi

* May vary on difference models.

RT064_HM_R5020

2/11

Robustel R5020 Hardware Manual
Simplified EU Declaration of Conformity We, Guangzhou Robustel Co., Ltd. are located at 501, Building #2, 63 Yongan Road, Huangpu District, Guangzhou, China, declare that this radio equipment complies with all applicable EU directives. The full text of the EU DoC is available at the following internet address: www.robustel.com/certifications/
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications not expressly approved by Guangzhou Robustel Co., Ltd for compliance could void the user's authority to operate this equipment.
RF Exposure This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 24 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC ID: 2AAJGR5020 Contains FCC ID: XMR2020RM500QAE

RT064_HM_R5020

3/11

Robustel R5020 Hardware Manual
ISED Notice: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device.
Cetappareilestconforme à la norme RSS d'Industrie Canada. Sonfonctionnementestsujet aux deux conditions suivantes: (1) ledispositif ne doit pas produire de brouillagepréjudiciable, et (2) cedispositifdoit accepter tout brouillagereçu, y compris un brouillage susceptible de provoquer un fonctionnementindésirable.
RF Exposure This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 24 cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 24 cm de distance entre la source de rayonnement et votre corps.
IC: 11610A-R5020 Contains IC: 10224A-2021RM500AE
Related download link Find more product documents or tools at: www.robustel.com/en/documentations/
Technical Support Tel: +86-20-82321505 Email: support@robustel.com Web: www.robustel.com

Document History Updates between document versions are cumulative. Therefore, the latest document version contains all updates made to previous versions.

Date July 6, 2022 November 7, 2022

Firmware Version 5.0.0 5.0.0

Document Version 1.0.0 1.0.1

Change Description Initial release. FCC statement and ISED notice updated.

RT064_HM_R5020

4/11

Robustel R5020 Hardware Manual

RT064_HM_R5020

5/11

Robustel R5020 Hardware Manual

Overview
Robustel R5020 supports WCDMA 3G network, LTE 4G network, and 5G network to provide high-speed wireless network bandwidth for devices through wireless connection, and it has dual-SIM card backup to ensure stable wireless network connection.

Package Checklist Before commencing installation ensure your package has the following components:

Device

3PIN Terminal Block

2x5PIN Terminal Block

Power Supply

Mounting Kit

RCMS Card

Quick Start Guide Card

Cellular Antenna (Rubber)

Wi-Fi Antenna

Note: The accessories could be different on specific order. Panel Layout (May Vary on Different Models)

Front-View

Back-View

RT064_HM_R5020

6/11

Robustel R5020 Hardware Manual

Interface Descriptions 1. Power Supply. 3PIN 3.5mm pitch terminal block.

Description Note

V+

Connect adapter or battery positive (red line)

V-

Connect adapter or battery negative (yellow line)

Car ignition and flameout detection (green line)

ACC

Note: when the car ignition and flameout detection function

With ACC Function

With POE Function

(Optional)

is not used, the ACC pin need to be connected to the V+ and Note:

cannot be left floating.

1) ACC and POE function can only be selected one

2) The input voltage is 10 to 30V DC(With ignition

sensing) or 9 to 36V DC(Without ignition sensing)

2. LED Indicator.

Name

Color

Status

Description

RUN

Green On, solid

Router is powered on

On, blinking

Router starts operating

Off

Router is powered off

MODEM

Green On, solid

Link connection is working

On, blinking

Data is sent and received

Off

Link connection is not working

NET

Green On, solid

Connection to 5G network is established(5g signal is the best)

On, blinking

Connection to Legacy network (4G or 3G) is established(3G signal difference / 4G signal medium)

Off

Network is not joined or joining

USR-OpenVPN

Green On, solid

OpenVPN connection is established

Off

OpenVPN connection is not established

USR-IPsec

Green On, solid

IPsec connection is established

Off

IPsec connection is not established

USR-SIM

Green On, solid

Main SIM card is being used

On, blinking

Backup SIM card is being used

Off

No SIM card is being used

Green On, solid

5G network: Reference Signal Received Power greater than -86 dBm (Strong signal)

Non-5G network: Received Signal Strength Indication greater than -73 dBm (Strong signal)

Yellow On, solid

5G network: Reference Signal Received Power -105 to -86 dBm (Moderate signal)

Non-5G network: Received Signal Strength Indication -91 to -73 dBm (Moderate signal)

Red

On, solid

5G network: Reference Signal Received Power -140 to -106 dBm (Weak signal)

Non-5G network: Received Signal Strength Indication -111 to -93dBm (Weak signal)

Off

No signal

WiFi

Green On, solid

Wi-Fi is enabled and working properly

Off

Wi-Fi is disabled or not working properly

Note: You can choose the display type of USR LED. For more details, please refer to

RT123_SM_RobustOS Software Manual, Services > Advanced > System >System Settings > User LED Type.

RT064_HM_R5020

7/11

Robustel R5020 Hardware Manual

3. Reset Button.

Function

Operation

Reboot

Press and hold the RST button for 2~ 5 seconds under the operating status.

Restore to default

Press and hold the RST button for 5~10 seconds, the RUN LED starts blinking quickly, the router will restore to default

configuration

configuration.

Restore to factory

Once the operation of restoring default configuration is performed twice within one minute, the router will restore to factory

default settings

default settings.

Note: The more details please refer to RT123_SM_RobustOS Software Manual, 2.3 Factory Reset.

4. Ethernet Ports. There are four Ethernet ports on R5020, including ETH0 (Optional POE supported), ETH1, ETH2, ETH3. The ETH0 on the router can be configured as a WAN port, while ETH1, ETH2 and ETH3 can only be configured as a LAN port. By default, ETH1, ETH2 and ETH3 are lan0, and their IP are 192.168.0.1/255.255.255.0.

Ethernet LED Indicator Status

Description

Link indicator

On, solid

Connection is established

(Yellow)

On, blinking

Data is being transferred

Off

Connection is not established

5. Digital IO & Serial Port. 2x5PIN 3.5mm pitch terminal block, 1 set of DO, 1 set of DI, 1 x RS232 and 1 x RS485.

DI signal access, can be used for NPN/PNP type sensor signal or switch signal acquisition. DO signal output,

can be used for NPN/PNP sensor control, please connect signals by referring to typical applications .

DI/DO

RS232

RS485

Direction

IGND

OGND

TXD

Router Device

RXD

Router Device

GND

OUT

GND

Internal diagram of DI&DO

Typical Application:

DI connected with NPN sensor

DI connected with PNP sensor

Note: The external power supply DC voltage range is 3V~30V.

DO Driven NPN Triode

DO Driven PNP Triode

6. USB Interface.

Function

Operation

Firmware upgrade

USB interface is used for batch firmware upgrading, but cannot be used for sending or receiving data from slave devices which

connected to it. You can insert a USB storage device into the router's USB interface, such as a U disk or a hard disk. If there have a

supported configuration file or a router firmware in this USB storage device, the router will automatically update the

configuration file or the firmware. For more details, please refer to RT123_SM_RobustOS Software Manual.

RT064_HM_R5020

8/11

Robustel R5020 Hardware Manual Hardware Installation 1. SIM Card Installation. Remove the SIM card cover to insert the SIM cards into the device, then screw up the cover.
2. Antenna Installation. Rotate the antenna into the antenna connector accordingly. Here take the cellular antenna as example. For 5G 4-IN-1 combo antenna, LHM# cable need to be connected to ANT1 and ANT2 while the MH# cable need to be connected to ANT0 and ANT3. GPS function is available when using the 4 in 1 combo antenna.
3. Terminal Block Installation. Insert the 2x5PIN terminal blocks into the interfaces connector, then can connect the devices or sensors to the gateway via corresponding interfaces e.g. RS232/RS485, DIDO...
4. Mounting Kit installation.

RT064_HM_R5020

9/11

Robustel R5020 Hardware Manual 5. Grounding the Device. Grounding will help to prevent the noise effect due to electromagnetic interference (EMI). Connect the device to the site ground wire by the grounding screw before powering on.
6. Power Supply installation. Insert the power supply cord into the corresponding terminal block if needed, then insert the terminal block into the power connector.
7. Connect the router to the computer. Connect the Ethernet cable to any port labeled ETH0 to ETH3 on the bottom of the router, and connect the other end of the cable to your computer.

RT064_HM_R5020

10/

Robustel R5020 Hardware Manual
Login to the Device 1. Connect the router's Ethernet port to a PC with a
standard Ethernet cable.
2. Before logging in, manually configure the PC with a static IP address on the same subnet as the gateway address, click and configure "Use the following IP address".

5. After logging in, the home page of the web interface is displayed, then you can view system information and perform configuration on the device.

6. The automatic APN selection is ON by default, if need to specify your own APN, please go to the menu Interface->Link Manager->Link Setting->WWAN Settings to finish the specific setting.

3. To enter the gateway's web interface, type http://192.168.0.1 into the URL field of your Internet browser.

4. Use login information shown in the product label when prompted for authentication.

7. The more configuration details please refer to RT123_SM_RobustOS Software Manual. (END)

RT064_HM_R5020 11

References

WPS 文字