8. Electrical Wiring Harness and Ground Point
A: OVERALL LOCATION
Diagrams illustrating the overall location of electrical wiring harnesses and ground points within the vehicle.
1. LHD MODEL
A diagram showing the general layout of wiring harnesses for the Left-Hand Drive (LHD) model. The following components are identified by numbers:
- (1) Front wiring harness
- (2) Engine wiring harness
- (3) Room light cord
- (4) Bulkhead wiring harness
- (5) Instrument panel wiring harness
- (6) Front door cord RH
- (7) Rear door cord RH
- (8) Rear wiring harness
- (9) Trunk lid cord (Sedan)
- (10) Rear defogger ground cord (Sedan)
- (11) Fuel tank cord
- (12) Rear door cord LH
- (13) Front door cord LH
- (14) Sunroof cord
- (15) Floor wiring harness
- (16) Transmission cord
- (17) Rear gate cord (Wagon)
- (18) Rear oxygen sensor cord
2. RHD MODEL
A diagram showing the general layout of wiring harnesses for the Right-Hand Drive (RHD) model. The following components are identified by numbers:
- (1) Front wiring harness
- (2) Engine wiring harness
- (3) Room light cord
- (4) Bulkhead wiring harness
- (5) Instrument panel wiring harness
- (6) Front door cord RH
- (7) Rear door cord RH
- (8) Rear wiring harness
- (9) Fuel tank cord
- (10) Rear door cord LH
- (11) Front door cord LH
- (12) Transmission cord
- (13) Rear gate cord
- (14) Rear oxygen sensor cord
B: FRONT WIRING HARNESS
1. LHD MODEL
Table detailing the connectors, poles, colors, areas, and connections for the Front Wiring Harness in the LHD model.
| No. | Pole | Color | Area | No. | Connecting to Name |
| F1 | 20 | Blue | B-2 | P1 | Floor wiring harness (With TCS model) |
| F2 | 8 | * | B-2 | P1 | Floor wiring harness (With ABS model) |
| F3 | 20 | Blue | B-2 | B100 | Bulkhead wiring harness (With ABS model) |
| F5 | 3 | Brown | B-1 | Front turn signal and side marker light RH | |
| F6 | 1 | Black | B-1 | Horn | |
| F7 | 2 | Brown | C-1 | Front fog light RH | |
| F10 | 3 | Black | B-1 | Front fog light RH (Outback with step roof) | |
| F11 | 4 | * | B-2 | Headlight RH | |
| F12 | 6 | * | B-2 | TCS motor relay | |
| F13 | 2 | Black | B-2 | TCS valve relay | |
| F14 | 2 | Black | B-2 | TCS pressure switch | |
| F15 | 12 | Gray | B-2 | TCS motor | |
| F16 | 3 | Gray | B-2 | Hydraulic unit (TCS) | |
| F17 | 3 | Black | C-1 | Sub fan motor | |
| F18 | 2 | Black | C-2 | Radiator main fan motor | |
| F19 | 2 | Gray | C-3 | Front hood switch (Security) | |
| F21 | 3 | Brown | C-3 | Front turn signal and side marker light LH | |
| F23 | 2 | Brown | C-2 | Front fog light LH | |
| F24 | 3 | Black | C-2 | Front fog light LH (Outback with step roof) | |
| F25 | 3 | Gray | B-2 | Headlight LH | |
| F26 | 1 x 2 | * | B-2 | A/C compressor | |
| F27 | 2 | Gray | B-2 | Generator | |
| F28 | 4 | Black | B-3 | A/C fuse (Relay holder) | |
| F29 | 4 | Black | B-3 | A/C main fan relay-1 (Relay holder) | |
| F30 | 4 | Black | B-3 | A/C sub fan relay-2 (Relay holder) | |
| F31 | 4 | Black | B-3 | A/C main fan relay-2 (Relay holder) | |
| F32 | 4 | Black | B-3 | A/C relay (Relay holder) | |
| F33 | 2 | Green | B-2 | Front washer motor | |
| F34 | 2 | * | B-3 | Rear washer motor | |
| F35 | 4 | Black | B-3 | SBF holder | |
| F36 | 8 | Black | B-3 | M/B | |
| F37 | 3 | * | B-3 | ||
| F38 | 2 | Black | B-3 | ||
| F39 | 2 | Black | B-3 | ||
| F40 | 1 | Brown | B-3 | ||
| F41 | 10 | Gray | B-4 | F/B | |
| F42 | 3 | Gray | B-4 | ||
| F43 | 5 | Gray | B-4 | ||
| F44 | 3 | Orange | B-4 | A/C diode | |
| F45 | 8 | * | B-3 | B61 | Bulkhead wiring harness |
| F46 | 20 | * | B-3 | B62 | Bulkhead wiring harness (Outback) |
| F47 | 2 | Black | B-4 | B108 | Horn (TAIWAN model) |
| F48 | 1 | Black | C-3 | Shield joint connector (ABS) | |
| F49 | 6 | * | B-3 | ABS control module and hydraulic control module |
A diagram shows the physical layout and location of these front wiring harness connectors.
2. RHD MODEL
Table detailing the connectors, poles, colors, areas, and connections for the Front Wiring Harness in the RHD model.
| No. | Pole | Color | Area | No. | Connecting to Name |
| F3 | 3 | Brown | B-1 | Front turn signal and side marker light RH | |
| F5 | 1 | Black | B-1 | Horn | |
| F7 | 3 | Black | B-1 | Headlight RH | |
| F16 | 3 | Black | C-1 | Sub fan motor | |
| F17 | 3 | Black | C-2 | Radiator main fan motor | |
| F19 | 3 | Brown | C-3 | Front turn signal and side marker light LH | |
| F20 | 1 | Black | C-2 | Horn | |
| F23 | 3 | Black | C-2 | Headlight LH | |
| F24 | 1 | Black | B-2 | A/C compressor | |
| F25 | 1 x 2 | * | B-2 | Generator | |
| F26 | 2 | Gray | B-2 | A/C fuse (Relay holder) | |
| F27 | 4 | Black | B-3 | A/C main fan relay-1 (Relay holder) | |
| F28 | 4 | Black | B-3 | A/C sub fan relay-2 (Relay holder) | |
| F29 | 4 | Black | B-3 | A/C main fan relay-2 (Relay holder) | |
| F30 | 4 | Black | B-3 | A/C relay (Relay holder) | |
| F31 | 4 | Black | B-3 | M/B | |
| F35 | 8 | Black | B-3 | ||
| F38 | 2 | Black | B-3 | ||
| F40 | 10 | Gray | B-2 | F/B | |
| F42 | 5 | Gray | B-2 | ||
| F43 | 3 | Orange | B-2 | A/C diode | |
| F44 | 8 | * | B-2 | B61 | Bulkhead wiring harness |
| F45 | 20 | * | B-2 | B62 | Bulkhead wiring harness |
| F47 | 2 | Gray | C-2 | A/C pressure switch | |
| F48 | 2 | Blue | B-2 | Thermal protector |
A diagram shows the physical layout and location of these front wiring harness connectors.
Connector F73 is listed separately: Pole: 1, Color: *, Area: B-1, Name: ABS pump motor ground.
C: BULKHEAD WIRING HARNESS (IN ENGINE ROOM)
1. LHD MODEL
Table detailing the connectors, poles, colors, areas, and connections for the Bulkhead Wiring Harness (in Engine Room) in the LHD model.
| No. | Pole | Color | Area | No. | Connecting to Name |
| B1 | 2 | * | B-2 | Pressure source switching solenoid | |
| B2 | 3 | Black | B-2 | Pressure sensor | |
| B3 | 5 | Gray | B-2 | Mass air flow sensor | |
| B4 | 2 | Gray | B-2 | AT dropping resistor | |
| B5 | 2 | Gray | B-2 | Resistor (Daytime running light) | |
| B6 | 2 | Gray | B-2 | ABS front sensor RH | |
| B7 | 2 | Brown | B-2 | ABS front sensor RH (Outback with step roof) | |
| B8 | 4 | * | B-2 | Cruise control pump | |
| B9 | 6 | * | A-2 | Front wiper motor | |
| B10 | 2 | Black | A-2 | FWD switch (AT) | |
| B11 | 2 | Brown | B-2 | A/C pressure switch | |
| B12 | 16 | Gray | B-3 | T4 | Transmission (AT) |
| B13 | 12 | Gray | B-2 | T3 | |
| B14 | 6 | Gray | B-3 | Ignitor | |
| B15 | 1 | Black | B-3 | Starter (Magnet) | |
| B16 | 2 | Gray | B-3 | ABS front sensor LH | |
| B17 | 2 | Brown | B-3 | ABS front sensor LH (Outback with step roof) | |
| B18 | 2 | Gray | B-3 | Brake fluid level switch | |
| B19 | 2 | Black | B-2 | Vehicle speed sensor | |
| B20 | 3 | Dark gray | B-2 | Front oxygen sensor | |
| B21 | 4 | * | B-2 | T5 | Rear oxygen sensor cord (Other models) |
| B22 | 4 | * | B-2 | Rear oxygen sensor (California model) | |
| B24 | 6 | Light gray | B-2 | E1 | Engine wiring harness |
| B25 | 12 | Light gray | B-2 | E2 | |
| B177 | 16 | Light gray | B-2 | E3 | |
| 2 | Gray | B-2 | T1 | Back-up light switch (MT) | |
| 2 | Brown | B-2 | T2 | Neutral position switch (MT) | |
| 3 | Gray | A-3 | Wiper deicer |
A diagram shows the physical layout and location of these bulkhead wiring harness connectors in the engine room.
2. RHD MODEL
Table detailing the connectors, poles, colors, areas, and connections for the Bulkhead Wiring Harness (in Engine Room) in the RHD model.
| No. | Pole | Color | Area | No. | Connecting to Name |
| B1 | 2 | Brown | B-2 | Pressure sources switching solenoid | |
| B2 | 3 | Black | B-2 | Pressure sensor | |
| B3 | 5 | Gray | B-2 | Mass air flow sensor | |
| B4 | 2 | Gray | B-2 | AT dropping resistor | |
| B7 | 4 | Gray | B-3 | Cruise control pump | |
| B8 | 6 | * | B-3 | Front wiper motor | |
| B9 | 2 | Black | A-2 | FWD switch | |
| B11 | 16 | Gray | B-3 | T4 | Transmission |
| B12 | 12 | Gray | B-2 | T3 | |
| B13 | 6 | Gray | B-3 | Ignitor | |
| B14 | 1 | Black | B-3 | Starter (Magnet) | |
| B16 | 2 | Gray | B-2 | Brake fluid level switch | |
| B17 | 2 | Black | B-3 | Vehicle speed sensor | |
| B18 | 3 | Dark gray | B-2 | Front oxygen sensor | |
| B19 | 4 | * | B-2 | T5 | Rear oxygen sensor cord (Other models) |
| B20 | 6 | Light gray | B-2 | E1 | Rear oxygen sensor (California model) |
| B21 | 12 | Light gray | B-2 | E2 | Engine wiring harness |
| B22 | 16 | Light gray | B-2 | E3 | |
| B26 | 2 | Black | B-3 | ||
| B27 | 3 | * | B-3 | M/B | |
| B28 | 1 | Brown | B-3 | Rear washer motor | |
| B29 | 2 | * | B-2 | Front washer motor | |
| B110 | 2 | Green | B-3 |
A diagram shows the physical layout and location of these bulkhead wiring harness connectors in the engine room.
D: BULKHEAD WIRING HARNESS (IN COMPARTMENT)
1. LHD MODEL
Table detailing the connectors, poles, colors, areas, and connections for the Bulkhead Wiring Harness (in Compartment) in the LHD model.
| No. | Pole | Color | Area | No. | Connecting to Name |
| B30 | 24 | * | C-1 | D1 | Front door cord LH |
| B31 | 7 | Yellow | C-1 | AB1 | SRS (Airbag) harness |
| B32 | 3 | Black | C-1 | Turn & hazard module | |
| B33 | 4 | Brown | B-1 | Diode (Brake fluid level) | |
| B35 | 2 | Black | B-1 | Diode (Without step light) | |
| B36 | 4 | Brown | B-1 | Diode (With step light) | |
| B37 | 22 | Black | C-1 | i1 | Instrument panel wiring harness |
| B38 | 22 | * | C-1 | i2 | |
| B39 | 22 | Brown | C-1 | i3 | |
| B40 | 20 | Blue | C-1 | i4 | |
| B41 | 16 | Gray | C-2 | OBD-II service connector | |
| B42 | 2 | * | C-2 | Power window circuit breaker | |
| B43 | 4 | * | C-2 | Power window and sunroof relay | |
| B44 | 6 | Black | C-2 | Illumination control module | |
| B45 | 8 | * | C-2 | Seat belt timer | |
| B46 | 4 | * | B-1 | R53 | Sunroof cord |
| B47 | 4 | Green | B-1 | Fuel pump relay | |
| B48 | 6 | Brown | B-1 | Main relay | |
| B49 | 4 | Blue | B-1 | Front fog light relay | |
| B50 | 3 | Black | B-1 | Horn relay | |
| B51 | 4 | * | B-1 | Blower relay | |
| B52 | 11 | Gray | B-1 | F/B | |
| B53 | 12 | Gray | B-1 | ||
| B54 | 4 | * | B-2 | Shield joint connector (AT) | |
| B55 | 12 | Black | B-2 | Transmission control module | |
| B56 | 16 | Black | B-2 | ||
| B57 | 20 | Black | B-2 | Shift-lock control module | |
| B58 | 12 | Black | B-2 | ||
| B59 | 5 | Black | B-1 | Headlight alarm relay (Security) | |
| B60 | 5 | Black | B-1 | Interrupt relay (Security) | |
| B61 | 4 | * | B-2 | Shield joint connector (With TCS model) | |
| B62 | 8 | * | B-2 | F44 | Front wiring harness |
| B63 | 20 | * | B-1 | F45 | |
| B64 | 40 | Gray | B-1 | P10 | Floor harness (With TCS model) |
| B65 | 2 | Black | B-2 | Stop light switch | |
| B66 | 4 | Black | B-2 | Stop & brake switch (With cruise control) | |
| B67 | 3 | Black | B-2 | Pedal stroke sensor (TCS) | |
| B68 | 4 | Black | B-2 | Pedal stroke switch (TCS) | |
| B69 | 5 | Black | B-3 | Slip ring | |
| B70 | 11 | Black | B-3 | Combination switch | |
| B71 | 9 | * | B-3 | ||
| B72 | 8 | * | B-3 | Ignition switch | |
| B73 | 2 | Black | B-3 | Key lock solenoid (AT) | |
| B74 | 2 | Black | B-3 | Key warning switch | |
| B75 | 2 | Green | C-2 | B76 | Test mode connector |
| B76 | 2 | Green | C-3 | B75 | |
| B77 | 10 | Brown | B-2 | Mode actuator | |
| B78 | 9 | Yellow | C-2 | Data link connector | |
| B79 | 14 | Gray | C-2 | Check connector | |
| B80 | 4 | Blue | B-2 | i20 | Instrument panel wiring harness |
| B81 | 1 x 2 | * | C-2 | Diagnosis terminal (Ground) | |
| B82 | 6 | Black | C-2 | Diagnosis connector | |
| B83 | 4 | * | C-3 | Shield joint connector (E/G) | |
| B84 | 96 | Light blue | B-3 | Engine control module | |
| B86 | 4 | * | B-3 | Blower motor resistor | |
| B87 | 2 | * | B-3 | Blower motor | |
| B88 | 3 | Black | B-3 | Evaporator thermoswitch | |
| B89 | 2 | Black | B-3 | Diode (Security) | |
| B90 | 4 | * | B-4 | R50 | Room light cord |
| B91 | 4 | * | B-4 | FRESH/RECIRC actuator | |
| B92 | 8 | * | B-4 | Door lock timer | |
| B93 | 16 | Black | B-4 | Security control module | |
| B94 | 20 | Black | B-4 | Cruise control module | |
| B95 | 2 | Black | B-4 | Diode (Daytime running light) | |
| B96 | 10 | * | B-4 | Daytime running light control module | |
| B97 | 8 | * | B-4 | R1 | Rear wiring harness |
| B98 | 20 | * | B-4 | R2 | Rear wiring harness (Taiwan model) |
| B99 | 24 | * | B-4 | R2 | Rear wiring harness (Except Taiwan model) |
| B100 | 20 | Blue | B-4 | F2 | Front wiring harness (With ABS model) |
| B101 | 24 | * | B-4 | D11 | Front door cord RH |
| B102 | 5 | Black | B-4 | Daytime running light relay | |
| B103 | 4 | Blue | B-4 | High-beam relay (Daytime running light) | |
| B104 | 4 | Pink | B-4 | Rear power supply relay | |
| B105 | 4 | Blue | B-1 | Starter interlock relay (MT) | |
| B106 | 2 | * | B-1 | Clutch switch (MT) | |
| B107 | 2 | Blue | B-1 | Clutch switch (Cruise control) | |
| B108 | 2 | Black | B-2 | ||
| B109 | 4 | Black | C-1 | F46 | Front wiring harness (Outback) |
| B112 | 2 | Black | B-1 | Fuse holder (Outback) | |
| B113 | 2 | * | C-1 | D50 | Diode (Front fog light) |
| B178 | 3 | * | B-4 | R85 | Front door cord LH |
| Rear wiring harness (Wiper deicer) |
A diagram shows the physical layout and location of these bulkhead wiring harness connectors in the compartment.
2. RHD MODEL
Table detailing the connectors, poles, colors, areas, and connections for the Bulkhead Wiring Harness (in Compartment) in the RHD model.
| No. | Pole | Color | Area | No. | Connecting to Name |
| B30 | 24 | * | C-4 | D1 | Front door cord RH |
| B31 | 7 | Yellow | C-4 | AB1 | SRS (Airbag) harness |
| B32 | 3 | Black | C-4 | Turn & hazard module | |
| B36 | 22 | Black | C-3 | i1 | Instrument panel wiring harness |
| B37 | 22 | * | C-3 | i2 | |
| B38 | 22 | Brown | C-3 | i3 | |
| B39 | 20 | Blue | C-3 | i4 | |
| B40 | 16 | Gray | C-3 | OBD-II service connector | |
| B41 | 2 | * | C-3 | Power window circuit breaker | |
| B42 | 4 | * | C-3 | Power window relay | |
| B43 | 6 | Black | C-3 | Illumination control module | |
| B44 | 8 | * | C-3 | Seat belt timer | |
| B46 | 4 | Green | B-4 | Fuel pump relay | |
| B47 | 6 | Brown | B-4 | Main relay | |
| B49 | 3 | Black | B-4 | Horn relay | |
| B50 | 4 | * | B-4 | Blower relay | |
| B51 | 11 | Gray | C-4 | F/B | |
| B52 | 12 | Gray | C-4 | ||
| B53 | 4 | * | B-3 | Shield joint connector (AT) | |
| B54 | 12 | Black | B-3 | Transmission control module | |
| B55 | 16 | Black | B-3 | ||
| B56 | 20 | Black | B-3 | Shift-lock control module | |
| B57 | 12 | Black | B-3 | ||
| B61 | 8 | * | B-4 | F44 | Front wiring harness |
| B62 | 20 | * | B-4 | F45 | |
| B64 | 2 | Black | B-3 | Stop light switch | |
| B65 | 4 | Black | B-3 | Stop & brake switch (With cruise control) | |
| B68 | 5 | Black | B-3 | Cruise control sub switch | |
| B69 | 11 | Black | C-3 | ||
| B70 | 9 | * | C-3 | Combination switch | |
| B71 | 8 | * | B-3 | Ignition switch | |
| B72 | 6 | Black | C-3 | ||
| B73 | 2 | Black | B-3 | Key lock solenoid | |
| B74 | 2 | Black | B-3 | Key warning switch | |
| B75 | 2 | Green | B-2 | B76 | Test mode connector |
| B76 | 2 | Green | B-2 | B75 | |
| B77 | 7 | * | B-2 | Mode actuator | |
| B78 | 9 | Yellow | B-2 | Data link connector | |
| B79 | 14 | Gray | C-2 | Check connector | |
| B80 | 4 | Blue | B-2 | i20 | Instrument panel wiring harness |
| B81 | 1 x 2 | * | B-2 | Diagnosis terminal (Ground) | |
| B82 | 6 | Black | B-2 | Diagnosis connector | |
| B83 | 4 | * | C-1 | Shield joint connector (E/G) | |
| B84 | 96 | Light blue | C-2 | Engine control module | |
| B85 | 4 | Brown | B-3 | Diode (Lighting) | |
| B86 | 4 | Black | B-1 | Blower motor resistor | |
| B87 | 2 | Black | B-1 | Blower motor | |
| B88 | 3 | Black | B-1 | Evaporator thermoswitch | |
| B90 | 2 | Green | B-4 | R50 | Room light cord |
| B91 | 5 | * | B-1 | FRESH/RECIRC actuator | |
| B92 | 8 | * | B-1 | Door lock timer | |
| B94 | 20 | Black | B-1 | Cruise control module | |
| B97 | 56 | * | B-4 | R1 | Rear wiring harness (S.M.J.) |
| B101 | 24 | * | B-1 | D11 | Front door cord LH |
| B111 | 3 | Gray | C-4 | F/B | |
| B113 | 2 | * | C-4 | D50 | Front door cord RH |
| B114 | 2 | Black | C-3 | Diode (Door warning) |
A diagram shows the physical layout and location of these bulkhead wiring harness connectors in the compartment.
E: ENGINE WIRING HARNESS AND TRANSMISSION CORD
1. LHD MODEL
Table detailing the connectors, poles, colors, areas, and connections for the Engine Wiring Harness and Transmission Cord.
| No. | Pole | Color | Area | No. | Connecting to Name |
| E1 | 6 | * | A-3 | B20 | |
| E2 | 12 | Gray | A-3 | B21 | Bulkhead wiring harness |
| E3 | 16 | Gray | A-3 | B22 | |
| E4 | 2 | Blue | A-2 | Purge control solenoid valve | |
| E5 | 2 | Light gray | A-2 | Injector #1 | |
| E6 | 2 | Dark gray | A-3 | Injector #3 | |
| E7 | 3 | Gray | A-3 | Idle air control solenoid valve | |
| E8 | 2 | Brown | B-3 | Engine coolant temperature sensor | |
| E9 | 1 | * | B-3 | Thermometer | |
| E10 | 2 | Gray | B-3 | Crankshaft position sensor | |
| E11 | 1 | * | B-3 | Oil pressure switch | |
| E12 | 3 | Gray | A-3 | Ignition coil | |
| E13 | 3 | Brown | A-3 | Throttle position sensor | |
| E14 | 2 | Gray | B-3 | Knock sensor | |
| E15 | 2 | Dark gray | B-4 | Camshaft position sensor | |
| E16 | 2 | Light gray | B-4 | Injector #2 | |
| E17 | 2 | Dark gray | B-4 | Injector #4 | |
| E18 | 2 | Brown | B-3 | EGR solenoid (AT) |
A diagram shows the physical layout and location of these engine wiring harness connectors.
Table detailing the transmission cord connectors:
| No. | Pole | Color | Area | No. | Connecting to Name |
| T1 | 2 | Gray | C-1 | B24 | Bulkhead wiring harness (MT) |
| T2 | 2 | Brown | C-1 | B25 | |
| T3 | 12 | Gray | D-3 | B12 | Bulkhead wiring harness (AT) |
| T4 | 16 | Gray | D-3 | B11 | |
| T5 | 4 | Gray | C-1/C-3 | B19 | Bulkhead wiring harness |
| T6 | 4 | Gray | D-2/D-4 | Rear oxygen sensor | |
| T7 | 12 | * | C-4 | Inhibitor switch (AT) |
A diagram shows the physical layout and location of these transmission cord connectors.
F: INSTRUMENT PANEL WIRING HARNESS
1. LHD MODEL
Table detailing the connectors, poles, colors, areas, and connections for the Instrument Panel Wiring Harness in the LHD model.
| No. | Pole | Color | Area | No. | Connecting to Name |
| i1 | 22 | Black | C-2 | B36 | |
| i2 | 22 | * | C-1 | B37 | Bulkhead wiring harness |
| i3 | 22 | Brown | C-1 | B38 | |
| i4 | 20 | Blue | C-2 | B39 | |
| i5 | 15 | Gray | C-1 | F/B | |
| i6 | 10 | * | C-1 | Remote control rearview mirror switch | |
| i7 | 6 | Yellow | B-2 | Front fog light switch | |
| i8 | 4 | Brown | B-2 | Security indicator light | |
| i9 | 6 | * | B-2 | TCS off switch | |
| i10 | 16 | Light gray | B-2 | Combination meter | |
| i11 | 5 | Light blue | B-2 | ||
| i12 | 16 | Light gray | B-2 | Combination meter | |
| i14 | 13 | * | B-2 | Combination meter | |
| i15 | 6 | * | B-3 | Fan switch | |
| i16 | 3 | * | B-3 | A/C switch | |
| i17 | 16 | * | B-3 | Mode control panel | |
| i18 | 6 | * | B-3 | Rear defogger switch | |
| i19 | 6 | Brown | B-2 | Cruise control main switch | |
| i20 | 4 | Blue | B-3 | B80 | Bulkhead wiring harness |
| i21 | 2 | Black | C-3 | Ash tray illumination light | |
| i22 | 10 | * | B-3 | Hazard switch | |
| i23 | 2 | Brown | B-4 | Glove box illumination light | |
| i24 | 1 | * | C-3 | Front accessory power supply | |
| i25 | 3 | * | C-3 | Radio | |
| i26 | 14 | * | B-3 | CD player illumination light | |
| i27 | 2 | * | B-3 | Ground | |
| i28 | 1 | Black | C-3 | Ground (Radio) | |
| i29 | 1 | Black | C-3 | ||
| i37 | 4 | * | C-1 | Rear defogger timer |
A diagram shows the physical layout and location of these instrument panel wiring harness connectors.
2. RHD MODEL
Table detailing the connectors, poles, colors, areas, and connections for the Instrument Panel Wiring Harness in the RHD model.
| No. | Pole | Color | Area | No. | Connecting to Name |
| i1 | 22 | Black | C-4 | B36 | |
| i2 | 22 | * | C-4 | B37 | Bulkhead wiring harness |
| i3 | 22 | Brown | C-4 | B38 | |
| i4 | 20 | Blue | C-4 | B39 | |
| i5 | 15 | Gray | C-4 | F/B | |
| i6 | 10 | * | C-4 | Remote control rearview mirror switch | |
| i10 | 16 | Light gray | B-3 | Combination meter | |
| i11 | 5 | Light blue | B-3 | ||
| i12 | 16 | Light gray | B-3 | Combination meter | |
| i14 | 13 | * | B-3 | Combination meter | |
| i15 | 8 | * | B-2 | Fan switch | |
| i17 | 16 | Black | B-2 | Mode control panel | |
| i18 | 6 | * | B-3 | Rear defogger switch | |
| i19 | 6 | Brown | B-3 | Cruise control main switch | |
| i20 | 4 | Blue | B-2 | B80 | Bulkhead wiring harness |
| i22 | 10 | * | B-2 | Hazard switch | |
| i23 | 2 | Brown | B-2 | Glove box illumination light | |
| i24 | 1 | * | C-2 | Front accessory power supply | |
| i25 | 3 | * | C-2 | Radio | |
| i26 | 14 | * | B-2 | CD player illumination light | |
| i27 | 2 | * | B-2 | Ground | |
| i28 | 1 | Black | C-2 | Ground (Radio) | |
| i29 | 1 | Black | C-2 | ||
| i37 | 4 | * | C-4 | Rear defogger timer |
A diagram shows the physical layout and location of these instrument panel wiring harness connectors.
G: REAR WIRING HARNESS
1. LHD MODEL
Table detailing the connectors, poles, colors, areas, and connections for the Rear Wiring Harness in the LHD model.
| No. | Pole | Color | Area | No. | Connecting to Name |
| R1 | 8 | * | B-2 | B97 | Bulkhead wiring harness |
| R2 | 24 | Black | B-2 | B98 | Bulkhead wiring harness (2200 cc engine AWD except Taiwan model) |
| R3 | 20 | * | B-2 | B98 | Bulkhead wiring harness (Other models) |
| R4 | 24 | * | B-2 | B99 | Bulkhead wiring harness |
| R5 | 1 | Black | B-2 | Parking brake switch | |
| R6 | 2 | Black | C-2 | Select lever illumination light (AT) | |
| R7 | 2 | * | C-2 | Shift lock solenoid (AT) | |
| R8 | 2 | * | C-2 | P position switch (AT) | |
| R9 | 2 | * | C-3 | Seat belt switch | |
| R10 | 1 | Brown | C-4 | Front door switch LH | |
| R11 | 2 | * | C-4 | D22 | Rear door cord LH (Security) |
| R12 | 8 | * | C-4 | D21 | Rear door cord LH |
| R13 | 1 | Brown | B-2 | Front door switch RH | |
| R14 | 2 | * | B-2 | D28 | Rear door cord RH (Security) |
| R15 | 8 | * | B-2 | D27 | Rear door cord RH |
| R16 | 8 | * | B-3 | R57 | Fuel tank cord (Except Taiwan model) |
| R29 | 1 | Brown | B-3 | R57 | Fuel tank cord (Taiwan model) |
| R30 | 3 | * | C-2 | Rear door switch RH | |
| R31 | 2 | Black | C-2 | Diode (Security) | |
| R41 | 3 | * | C-2 | Diode (Rear gate latch switch) (Wagon) | |
| R42 | 4 | Blue | B-2 | Diode (Security) | |
| R43 | 6 | * | B-3 | Seat heater (Passenger) | |
| R44 | 6 | Blue | B-3 | Seat heater switch (Passenger) | |
| R46 | 4 | Blue | B-3 | Seat heater switch (Driver) | |
| R47 | 2 | * | C-3 | Seat heater (Driver) | |
| R50 | 3 | * | B-3 | R67 | Fuel tank cord (Except Taiwan model) |
| R51 | 4 | * | B-4 | Fuel tank pressure sensor (2200 cc engine AWD model) | |
| R52 | 2 | * | B-2 | B90 | Bulkhead wiring harness |
| R53 | 2 | * | B-2 | Vanity mirror illumination light RH | |
| R54 | 4 | * | A-3 | Room light | |
| R55 | 2 | * | C-3 | B45 | Bulkhead wiring harness |
| R56 | 1 | * | B-3 | Vanity mirror illumination light LH | |
| R57 | 2 | * | B-3 | Sunroof control module (Except OUTBACK) | |
| R58 | 8 | * | B-3 | Spot light | |
| R59 | 6 | Black | B-3 | R15 | Rear wiring harness (Except Taiwan model) |
| R67 | 6 | * | B-3 | R15 | Rear wiring harness (Taiwan model) |
| R68 | 2 | * | B-3 | Fuel gauge module & fuel pump | |
| R69 | 2 | * | B-4 | Fuel gauge sub module (AWD) | |
| R83 | 2 | * | B-3 | R46 | Rear wiring harness (Except Taiwan model) |
| R84 | 2 | * | B-3 | Pressure control solenoid valve | |
| R85 | 4 | * | B-3 | Vent control solenoid valve | |
| R86 | 4 | * | B-3 | R84 | Fuel tank cord (2200 cc engine AWD model) |
| R87 | 3 | * | B-2 | R83 | Rear wiring harness (2200 cc engine AWD model) |
| R88 | 8 | * | B-3 | B178 | Bulkhead wiring harness (Wiper deicer) |
| R89 | 4 | Blue | C-3 | Wiper deicer switch | |
| R90 | 4 | * | C-3 | Wiper deicer relay | |
| R91 | 6 | Black | A-3 | Sunroof control module (OUTBACK) | |
| R92 | 6 | Brown | A-3 | Sunroof switch (OUTBACK) |
A diagram shows the physical layout and location of these rear wiring harness connectors.
2. RHD MODEL
Table detailing the connectors, poles, colors, areas, and connections for the Rear Wiring Harness in the RHD model.
| No. | Pole | Color | Area | No. | Connecting to Name |
| R1 | 56 | * | B-2 | B97 | Bulkhead wiring harness (S.M.J.) |
| R4 | 1 | Black | B-2 | Parking brake switch | |
| R5 | 2 | * | B-2 | Select lever illumination light | |
| R6 | 2 | Black | B-2 | Shift lock solenoid | |
| R7 | 2 | * | B-2 | P position switch | |
| R8 | 2 | * | B-2 | Seat belt switch | |
| R9 | 1 | Brown | B-3 | Front door switch LH | |
| R11 | 8 | * | B-4 | D21 | Rear door cord LH |
| R12 | 1 | Brown | B-2 | Front door switch RH | |
| R14 | 8 | * | B-2 | D27 | Rear door cord RH |
| R15 | 8 | * | B-3 | R57 | Fuel tank cord |
| R16 | 1 | Brown | A-3 | Rear door switch RH | |
| R30 | 2 | Black | B-2 | Diode (Rear gate latch switch) | |
| R46 | 2 | * | B-3 | R67 | Fuel tank cord |
| R47 | 3 | * | B-4 | Fuel tank pressure sensor | |
| R50 | 2 | Green | B-2 | B90 | Bulkhead wiring harness |
| R52 | 2 | * | A-3 | Room light | |
| R57 | 8 | * | B-3 | R15 | Rear wiring harness |
| R58 | 6 | * | A-3 | Fuel gauge module & fuel pump | |
| R59 | 2 | * | B-4 | Fuel gauge sub module | |
| R67 | 2 | * | B-3 | R46 | Rear wiring harness |
| R68 | 2 | * | B-3 | Pressure control solenoid valve | |
| R69 | 2 | * | A-3 | Vent control solenoid valve | |
| R83 | 4 | * | B-3 | R84 | Fuel tank cord |
| R84 | 4 | * | B-3 | R83 | Rear wiring harness |
A diagram shows the physical layout and location of these rear wiring harness connectors.
H: FLOOR WIRING HARNESS AND DOOR CORD
1. LHD MODEL
Table detailing the connectors, poles, colors, areas, and connections for the Floor Wiring Harness and Door Cord in the LHD model.
| No. | Pole | Color | Area | No. | Connecting to Name |
| P1 | 8 | * | B-1 | F1 | Front wiring harness (With TCS model) |
| P2 | 2 | Black | C-2 | Diode (TCS) | |
| P4 | 6 | * | B-3 | ABS/TCS control module | |
| P5 | 8 | * | B-3 | ||
| P6 | 16 | * | B-3 | ||
| P7 | 20 | * | B-3 | Rear ABS sensor RH | |
| P8 | 2 | Gray | B-3 | Rear ABS sensor RH (Outback with step roof) | |
| P9 | 2 | Gray | B-4 | Rear ABS sensor LH | |
| P10 | 40 | Gray | B-2 | B63 | Bulkhead wiring harness (With TCS model) |
| P11 | 3 | * | B-2 | ABS G sensor | |
| D1 | 24 | * | C-3 | B30 | Bulkhead wiring harness |
| D2 | 2 | * | C-3 | Front door speaker LH | |
| D3 | 2 | Green | C-3 | Front power window motor LH | |
| D4 | 2 | Black | B-3 | Front tweeter LH | |
| D5 | 6 | * | B-3 | Remote control rearview mirror LH | |
| D6 | 2 | * | B-3 | Mirror heater LH | |
| D7 | 14 | * | B-3 | Power window main switch | |
| D8 | 4 | * | B-3 | Front door lock actuator LH | |
| D9 | 4 | Gray | B-3 | Front door lock actuator LH (With security system) | |
| D10 | 2 | Black | C-3 | Front door key switch LH (Security) | |
| D11 | 24 | * | B-2 | B101 | Step light LH |
| D12 | 2 | * | B-2 | Bulkhead wiring harness | |
| D13 | 2 | Green | B-2 | Front door speaker RH | |
| D14 | 2 | Black | B-2 | Front power window motor RH | |
| D15 | 6 | * | B-2 | Front tweeter RH | |
| D16 | 2 | * | B-2 | Remote control rearview mirror RH | |
| D17 | 5 | * | B-2 | Mirror heater RH | |
| D18 | 4 | * | B-2 | Front power window sub switch RH | |
| D19 | 4 | Gray | B-2 | Front door lock actuator RH | |
| D20 | 2 | Black | B-2 | Front door lock actuator RH (With security system) | |
| D21 | 8 | * | B-3 | R11 | Front door key switch RH (Security) |
| D22 | 2 | * | B-3 | R10 | Rear wiring harness |
| D23 | 2 | Black | B-4 | Rear wiring harness (Security) | |
| D24 | 2 | Green | B-4 | Rear door speaker LH | |
| D25 | 5 | * | B-4 | Rear power window motor LH | |
| D26 | 4 | * | B-4 | Rear power window sub switch LH | |
| D27 | 8 | * | B-2 | R14 | Rear door lock actuator LH |
| D28 | 2 | * | B-2 | R13 | Rear wiring harness |
| D29 | 2 | Black | B-2 | Rear wiring harness (Security) | |
| D30 | 2 | Green | B-3 | Rear door speaker RH | |
| D31 | 5 | * | A-2 | Rear power window motor RH | |
| D32 | 4 | * | A-3 | Rear power window sub switch RH | |
| D50 | 2 | * | C-2 | B113 | Rear door lock actuator RH |
| D51 | 5 | * | B-3 | Bulkhead wiring harness | |
| D52 | 5 | Green | B-2 | Front door lock switch LH | |
| 5 | Green | C-3 | Front door lock switch RH |
A diagram shows the physical layout and location of these floor wiring harness and door cord connectors.
2. RHD MODEL
Table detailing the connectors, poles, colors, areas, and connections for the Floor Wiring Harness and Door Cord in the RHD model.
| No. | Pole | Color | Area | No. | Connecting to Name |
| D1 | 24 | * | B-2 | B30 | Bulkhead wiring harness |
| D2 | 2 | * | B-2 | Front door speaker RH | |
| D3 | 2 | Green | B-2 | Front power window motor RH | |
| D4 | 2 | Black | A-2 | Front tweeter RH | |
| D5 | 6 | * | B-2 | Remote control rearview mirror RH | |
| D7 | 14 | * | A-2 | Power window main switch | |
| D8 | 4 | * | A-2 | Front door lock actuator RH | |
| D11 | 24 | * | B-3 | B101 | Bulkhead wiring harness |
| D12 | 2 | * | B-3 | Front door speaker LH | |
| D13 | 2 | Green | B-3 | Front power window motor LH | |
| D14 | 2 | Black | B-3 | Front tweeter LH | |
| D15 | 6 | * | B-3 | Remote control rearview mirror LH | |
| D17 | 5 | * | B-3 | Front power window sub switch LH | |
| D18 | 4 | * | B-3 | Front door lock actuator LH | |
| D21 | 8 | * | B-3 | R11 | Rear wiring harness |
| D23 | 2 | Black | B-4 | Rear door speaker LH | |
| D24 | 2 | Green | B-4 | Rear power window motor LH | |
| D25 | 5 | * | B-4 | Rear power window sub switch LH | |
| D26 | 4 | * | B-4 | Rear door lock actuator LH | |
| D27 | 8 | * | B-2 | R14 | Rear wiring harness |
| D29 | 2 | Black | B-3 | Rear door speaker RH | |
| D30 | 2 | Green | A-3 | Rear power window motor RH | |
| D31 | 5 | * | A-3 | Rear power window sub switch RH | |
| D32 | 4 | * | A-3 | Rear door lock actuator RH | |
| D50 | 2 | * | B-2 | B113 | Bulkhead wiring harness |
| D51 | 5 | Green | B-2 | Front door lock switch RH | |
| D52 | 5 | Green | C-3 | Front door lock switch LH |
A diagram shows the physical layout and location of these floor wiring harness and door cord connectors.
I: REAR END WIRING HARNESS (SEDAN)
Table detailing the connectors, poles, colors, areas, and connections for the Rear End Wiring Harness (Sedan).
| No. | Pole | Color | Area | No. | Connecting to Name |
| R17 | 1 | Black | A-3 | Rear defogger (Power) | |
| R18 | 2 | Black | B-3 | Rear speaker RH | |
| R19 | 2 | * | B-3 | High-mounted stop light | |
| R20 | 2 | Blue | B-2 | Trunk room light | |
| R21 | 2 | Black | B-2 | Rear speaker LH | |
| R22 | 1 | Brown | B-1 | Rear door switch LH | |
| R23 | 3 | * | B-2 | Power antenna | |
| R24 | 6 | * | B-3 | R60 | Trunk lid cord (Without security system) |
| R25 | 8 | * | B-3 | R60 | Trunk lid cord (With security system) |
| R26 | 2 | Black | B-4 | Rear defogger condenser | |
| R27 | 4 | * | B-4 | Rear combination light RH | |
| R28 | 2 | * | B-4 | Trunk room light switch | |
| R45 | 4 | * | B-3 | Rear combination light LH | |
| R47 | 3 | * | B-4 | Trailer connector | |
| R60 | 6 | * | B-4 | Fuel tank pressure sensor (2200 cc engine FWD and 2500 cc engine model) | |
| R61 | 8 | * | B-4 | R24 | Rear wiring harness (Without security system) |
| R62 | 3 | * | B-4 | R24 | Rear wiring harness (With security system) |
| R63 | 4 | * | B-4 | Key switch (Security) | |
| R64 | 4 | * | B-3 | Rear finisher light RH | |
| R65 | 1 | Black | A-2 | License plate light | |
| R66 | 2 | Black | B-4 | Rear finisher light LH | |
| Rear defogger (Ground) | |||||
| High-mounted stop light (Rear spoiler) |
A diagram shows the physical layout and location of these rear end wiring harness connectors for the sedan model.
J: REAR END WIRING HARNESS (WAGON)
1. LHD MODEL
Table detailing the connectors, poles, colors, areas, and connections for the Rear End Wiring Harness in the Wagon LHD model.
| No. | Pole | Color | Area | No. | Connecting to Name |
| R22 | 1 | Brown | C-1 | Rear door switch LH | |
| R23 | 6 | * | C-2 | Power antenna | |
| R25 | 2 | Black | C-3 | Rear defogger condenser | |
| R26 | 4 | Black | D-4 | Rear combination light RH | |
| R28 | 4 | Black | C-2 | Rear combination light LH | |
| R32 | 1 | * | C-2 | Rear accessory power supply (Power) | |
| R33 | 1 | Black | C-2 | Rear accessory power supply (Ground) | |
| R36 | 5 | Black | C-3 | Rear wiper relay | |
| R37 | 2 | * | C-3 | D33 | Rear gate cord |
| R38 | 4 | * | C-3 | D34 | |
| R39 | 8 | * | C-4 | D35 | Rear gate cord (With security) |
| R40 | 4 | Black | C-3 | D36 | |
| R45 | 6 | * | C-2 | Trailer connector (Outback with step roof) | |
| R47 | 3 | * | D-3 | Fuel tank pressure sensor (2200 cc engine FWD and 2500 cc engine model) | |
| R89 | 8 | * | D-2 | Joint connector (Rear speaker) | |
| R90 | 8 | * | D-2 | Joint connector (Rear speaker) | |
| R91 | 4 | Black | C-4 | D65 | Rear gate cord (With rear tweeter) |
A diagram shows the physical layout and location of these rear end wiring harness connectors for the wagon LHD model.
Table detailing the connectors, poles, colors, areas, and connections for the Rear Wiring Harness in the Wagon RHD model.
| No. | Pole | Color | Area | No. | Connecting to Name |
| D33 | 2 | * | C-3 | R37 | Rear wiring harness |
| D34 | 4 | * | C-3 | R38 | |
| D35 | 8 | * | C-4 | R39 | Rear wiring harness (With security) |
| D36 | 4 | Black | C-3 | R40 | |
| D37 | 1 | Black | B-3 | Luggage room light | |
| D38 | 1 | * | B-3 | High-mounted stop light | |
| D39 | 2 | * | B-3 | Rear defogger (Power) | |
| D40 | 1 | Black | B-4 | Rear finisher light RH | |
| D41 | 4 | Gray | B-4 | Rear wiper motor | |
| D42 | 4 | * | B-4 | License plate light RH | |
| D43 | 4 | * | B-3 | License plate light LH | |
| D44 | 2 | * | B-4 | Rear gate latch switch | |
| D45 | 2 | * | A-4 | Rear gate lock actuator (Without security system) | |
| D46 | 2 | Black | A-4 | Rear gate lock actuator (With security system) | |
| D47 | 4 | * | A-4 | ||
| D48 | 1 | Black | B-3 | Rear defogger (Ground) | |
| D49 | 4 | * | A-3 | Rear finisher light LH | |
| D65 | 4 | Black | C-4 | R91 | Rear wiring harness (With rear tweeter) |
| D66 | 2 | Black | C-3 | Rear tweeter RH | |
| D67 | 2 | Black | B-2 | Rear tweeter LH |
A diagram shows the physical layout and location of these rear end wiring harness connectors for the wagon RHD model.
