4 PAIR 22AWG CAT8.1 S/FTP LSZH
Brand: SECOMP
Description
Installation Temperature Range: 0 ~ 50 ℃
Operating Temperature Range: -20 ~ 75 °C
Reference Standards
- ISO/IEC 11801, EN 50173, ANSI/TIA-568.2-D
- IEC 61156-5
- EN 50288
- EN 50575
- EN 50399
- EN 60332-1-2
- EN 61034-2
- EN 60754-2
- CPR-Dca-S2,d1, a1 verified
- ROHS 2.0 & REACH Compliant
Application
- 10BASE-T (IEEE 802.3)
- 4/16 Mbps TOKEN RING (IEEE 802.5)
- 100BASE-VG-AnyLAN 100 Mbps TP-PMD (ANSI X3T9.5)
- 100BASE-T (IEEE 802.3)
- 55/155 Mbps ATM
- 1000BASE-T (Gigabit Ethernet)
- 1.2 Gbps ATM
- 40G BASE-T
Product Figure
The cable structure consists of the following layers from the inside out: CONDUCTOR (core wire), INSULATION (insulating layer), AL-FOIL (aluminum foil shield), BRAID (braided shield), and JACKET (outer protective layer).
Cable Jacket Marking
CAT8.1 S/FTP 2000MHz 4x2x22AWG/1 LSZH CPR(Dca-S2, d1,a1) ISO11801 & EN50173 & ANSI/TIA568.2-D xxxM
Physical Characteristics
| Characteristic | Value |
|---|---|
| Structure | S/FTP |
| Construction | 4 Pairs |
| Number of Pairs | 22 |
| Conductor material | 99.99% oxygen-free copper |
| Conductor dimension | 1/0.60±0.005 mm |
| Insulation material | FMPE |
| Insulation dimension | 1.42±0.05mm |
| Number colour | 1.White & Blue 2.White & Orange 3.White & Green 4.White & Brown |
| Twisting lay length | <30mm |
| Cabling | |
| Cabling lay length | <200mm |
| Filler | N/A |
| Binder | N/A |
| Shield | |
| Individual shield & material | AL-Foil |
| Primary overall shield & material | AL-MG braid |
| Secondary overall shield & material | N/A |
| Shield coverage approx | 30% |
| Drain wire | N/A |
| Jacket material | LSZH |
| Jacket thickness nominal | 0.50mm |
| Outer jacket | |
| Overall nominal dimension | 7.50±0.30 mm |
| Jacket rip cord | None |
Mechanical Characteristics
| Characteristic | Value |
|---|---|
| Operating temperature range | -20°C~+75°C |
| Bulk cable weight approx | 110 N |
| Max. recommended pulling tension | 110 N |
| Min. bend radius (install) | 8*O.D. |
| Outer jacket tensile strength | ≥9.0MPa |
| Outer jacket elongation | ≥100% |
| Outer jacket aging condition | 100°C*168 hrs |
| After aging, tensile strength | ≥70% of Unaging |
| After aging, elongation | ≥50% of Unaging |
| Cold bend (static) | No Crack (@ -20° C X 4hrs) |
| Nom. mutual capacitance | <5.6 nF/100m (@1kHz) |
| Pair to ground capacitance unbalance | <160 pF/100m |
| Nominal velocity of propagation | 72% |
| Max. delay skew | 25ns/100m |
| Max. conductor DC resistance | 9.5Ω/100m(@20°C) |
| Max. conductor resistance unbalance | 2%(@20°C) within a pair |
| Min, insulation resistance | 5000 MΩ.km |
| Max. operating voltage - UL | 300 V |
| Dielectric strength | 2.5kV d.c. for 2s Or 1.0 kV d.c. for 1 min |
Electrical Characteristics
| Frequency (MHz) | Attenuation (dB/100m) | NEXT (dB) | PSNEXT (dB) | Return loss (dB) | ELFEXT (dB) | PSELFEXT (dB) |
|---|---|---|---|---|---|---|
| 1 | 1.00 | 78 | 75 | 20.0 | 78.0 | 75.0 |
| 4 | 1.12 | 78 | 75 | 23.0 | 78.0 | 75.0 |
| 8 | 1.57 | 78 | 75 | 24.5 | 78.0 | 75.0 |
| 16 | 2.20 | 78 | 75 | 25 | 76.5 | 73.5 |
| 25 | 2.75 | 78 | 75 | 25 | 72.6 | 69.6 |
| 40 | 3.49 | 78 | 75 | 25.0 | 68.6 | 65.6 |
| 62.5 | 4.37 | 78 | 75 | 23.6 | 64.7 | 61.7 |
| 100 | 5.56 | 75.4 | 72.4 | 22.2 | 60.6 | 57.6 |
| 250 | 8.92 | 69.4 | 66.4 | 19.4 | 52.6 | 49.6 |
| 300 | 9.81 | 68.2 | 65.2 | 18.9 | 51.1 | 48.1 |
| 600 | 14.13 | 63.7 | 60.7 | 16.8 | 45.0 | 42.0 |
| 800 | 16.48 | 61.9 | 58.9 | 15.9 | 42.5 | 39.5 |
| 1000 | 18.58 | 60.4 | 57.4 | 15.2 | 40.6 | 37.6 |
| 1500 | 23.17 | 57.8 | 54.8 | 14.0 | 37.1 | 34.1 |
| 2000 | 27.15 | 55.9 | 52.9 | 13.1 | 34.6 | 31.6 |
Product Details
Item No.: 21.99.1800
Length: 100 m
Cable Color: Grey RAL7035
Revision History
No revisions listed in the provided document.
