Indoor Dining Chair Assembly Instructions
This document provides step-by-step instructions for assembling your new Indoor Dining Chair.
Important Information
ATTENTION: If you have any problems or questions, email or call customer service before you return this product to the store where it was purchased.
When emailing Customer Service, please include your Order Number and platform of purchase in the email subject for quicker assistance.
Parts List
| Part Identifier | Description | Quantity |
|---|---|---|
| PARTS | ||
| A | WINGS LEFT | 1 |
| B | WINGS RIGHT | 1 |
| C | SEAT FRAME WITH CUSHION | 1 |
| D | PILLOW | 1 |
| E | FRONT LEG | 2 |
| HARDWARE | ||
| F | ALLEN BOLT 1/4" x 2-1/4" | 4 |
| G | ALLEN BOLT 1/4" x 1-3/8" | 8 |
| H | SPRING WASHER 1/4" | 12 |
| I | FLAT WASHER 1/4" | 12 |
| J | ALLEN KEY #M4 | 1 |
| SPARE PART | ||
| F | ALLEN BOLT 1/4" x 2-1/4" | 1 |
| G | ALLEN BOLT 1/4" x 1-3/8" | 1 |
| H | SPRING WASHER 1/4" | 1 |
| I | FLAT WASHER 1/4" | 1 |
Visual representation of parts: A (x1), B (x1), C (x1), D (x1), E (x2), F (x4), G (x8), H (x12), I (x12), J (x1). Spare parts: F (x1), G (x1), H (x1), I (x1).
Getting Started & Safety Tips
Please read and follow all safety tips.
- Before assembly, carefully use scissors or a utility knife to cut and unwrap all parts. Make sure you do not discard the hardware.
- Make sure that you have all the parts listed. If you are missing any parts, please email us. Please identify the parts you need and the model number. Make sure to include your name and address.
- Please include your Order Number and platform of purchase in the email subject, and one of our customer service representatives will get back to you.
Warm Tips:
- The plastic covers on some metal parts are just for product protection. Please remove them before assembly.
- Please follow the sequence of assembly during assembly.
- Do not tighten the screws until all of them are in right positions.
Assembly Steps
Step 1
Assemble the seat frame with cushion (C) to the wings (A) & (B). Use the Allen key (J) with hardware G (8 pieces), H (8 pieces), and I (8 pieces) for fastening. Attention: DO NOT TIGHTEN THE BOLTS.
Diagram shows seat frame (C) connecting to wings (A) and (B) using bolts (G), washers (H, I), and Allen key (J). A close-up view details the hardware assembly.
Step 2
Assemble the front legs (E) to the seat frame with cushion (C) using the Allen Key (J) with hardware F (4 pieces), H (4 pieces), and I (4 pieces) for fastening. Attention: DO NOT TIGHTEN THE BOLTS.
Diagram shows front legs (E) attaching to the seat frame (C) using bolts (F), washers (H, I), and Allen key (J). A close-up view details the hardware assembly.
Step 3
Place the pillow (D) onto the chair.
Diagram shows the pillow (D) being placed on the assembled chair structure.
To level the chair, stand it on a flat surface and tighten all the bolts using the Allen Key (J).
You have completed assembling the furniture. Enjoy!
