Instruction Manual for PHILIPS models including: BY200P Celling Light, BY200P, Celling Light, Light
File Info : application/pdf, 2 Pages, 449.57KB
DocumentDocumentGreenUp Wellglass/ LED
BY200P
Mounting instruction/
IP65
S.Cx
S.Cx
0.03 0.30~35m
4441 000 08321 4441 700 95311
Product Type
Voltage (v) Frequency (Hz) Power (w)
CCT Dimension (mm) D*W*H
Accessory
BY200P LED32 L-B/CW PSU
BY200P LED32 L-B/NW PSU BY200P LED44 L-B/CW PSU
220-240~
BY200P LED44 L-B/NW PSU
50/60Hz
29W 40W
6500K 4000K
ø215×218×205
6500K 4000K
ø215×218×255
BY200Z MB/
2.3
BY200Z WG/
BY200Z MB/
2.7
BY200Z WG L/
D
H
W
1 Mounting/
Bracket Mounting/
BY200Z MB, Optional accessory/
1. Mounting the grommet to the
screw hole
Bracket mounting is used for indoor only
Mounting hole/
120
Ø10.5
Ø10.5
2. Mounting the bracket kit
Housing/ Tooth washer/D6 Bracket/ Flat washer/D6 Spring washer/D6 Screw/M6
3. Adjust the mounting angle
160º
4. Lock screws with Allen key-5 GB/T5356-5
8N.m
Signify (China) Investment Co., Ltd. Building No. 9, Lane 888 Tianlin Road, Minhang District, Shanghai, China Postalcode: 200233
8889 200233
Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips N.V.
Pipe Mounting/
1. Must to be mounted to the end
2. Lock the screw with Allen key-2 GB/T 5 35 6-2
2.5N.m
Pipe dimension/
20~25m m
G3/4''
2 WG Mounting/
1N.m
G3/4'' The pipe is not provided/ BY200Z WG./WG L, Optional accessory /
3 Cable Connection/
Please use IP65 or above cable connection box. It is not provided. The inside of the cable connection box shoud have fixed device of wire
IP65
Power Cable / : 60245IEC57 3×1.0~1.5mm2
3
Brown
L
YellowGreen G
Blue
N
Connect to customer's cable connection box.
40 28 7
3×1mm2
6-13
1. Please read this manual carefully before using the product. Please keep the manual for reference later.
2. The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulat ions or the national requirements. IEE
3. The luminaire must not be used at explosive atmosphere or explosive dust.
4. The luminaire is designed for resisting wind force under unexpected condition. The luminaire shall not be used as floodlight, and the photometric of the luminaire is not designed for floodlighting.
5. The cable of the luminaire should use "Z" type connection. The luminaire has to be scrapped if the wire broken. Z
6. Please replace any cracked safety screen.
7. In order to ensure optimum performance, please clean the luminaire regularly (recommended twice a year). When cleaning the luminaire, please use soft cotton cloth only.
8.The corrosive atmosphere or hazardous materials such as sulfur, chlorine, phthalate, etc must be avoided during the use and s torage.
The light source contained in this luminaire should only be replaced by manufacturer or his service agent or a similar qualif ied person.
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environme Cut nt or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Data subject to change without notice