JBL Go Essential 2 Portable Waterproof Speaker

This document provides information on the JBL Go Essential 2 portable waterproof speaker, including its features, specifications, and usage guidelines.

Key Features and Usage

Bluetooth Pairing: Connect your device to the JBL Go Essential 2 via Bluetooth for wireless audio streaming.

Charging: The speaker features a Type-C USB port for charging. Ensure the charging port lid is tightly closed when not in use. Avoid exposing the speaker to liquids while charging, as this can cause permanent damage. Recharge the battery fully at least once every 3 months to maintain battery lifespan.

Water and Dust Resistance: The JBL Go Essential 2 is IP67 rated, meaning it is waterproof and dustproof. It can withstand submersion in water up to 1 meter for 30 minutes. However, avoid exposing it to chemicals, salt, or foreign particles in water, as these can damage the waterproof seals or connector surface over time. If the speaker gets wet, ensure it is completely dry and clean before charging.

Battery Life: The speaker offers up to 5 hours of music playback time, depending on volume level and audio content. Battery life may vary due to usage patterns and environmental conditions.

External Adapter Usage: When using an external adapter, ensure its output voltage/current does not exceed 5V/3A.

Safety and Compliance: The product complies with energy consumption requirements for electronic equipment. It is designed to automatically switch to off/standby mode after 20 minutes of inactivity. The device is homologated by Anatel and meets technical requirements.

Technical Specifications

Transducer: 1 x 40mm / 1.57"
Output Power: 3.1W RMS
Frequency Response: 180 Hz - 20 kHz
Signal-to-Noise Ratio: > 80 dB
Battery Type: Li-ion polymer 2.7 Wh (equivalent to 3.7 V / 730 mAh)
Battery Charge Time: 2.5 hours (5 V / 1 A)
Music Play Time: Up to 5 hours
USB Port: Type C
USB Rating: 20 V / 5 A (maximum)
Bluetooth Version: 4.2
Bluetooth Profiles: A2DP V1.2, AVRCP V1.5
Bluetooth Transmitter Frequency Range: 2400 MHz - 2483.5 MHz
Bluetooth Transmitter Power: 6 dBm (EIRP)
Bluetooth Transmitter Modulation: GFSK, π/4 DQPSK, 8DPSK
Product Dimensions (W x H x D): 86.0 x 71.2 x 31.6 mm / 3.4 x 2.8 x 1.2"
Net Weight: 0.18 kg / 0.39 lbs
Packaging Dimensions (W x H x D): 115 x 100 x 33 mm / 4.5 x 3.9 x 1.3"
Gross Weight: 0.24 kg / 0.52 lbs
Maximum Operation Temperature: 45 °C
Waterproof & Dustproof Rating: IP67 (1 m / 30 mins)

Power Consumption Information

Off mode: N/A
Standby mode: 0.5 W
Networked standby mode: 2.0 W
Networked standby mode (all ports connected): 2.0 W
Automatic switch to Off/Standby mode: After 20 minutes of inactivity.
Automatic switch to Networked Standby mode: After 20 minutes of inactivity when wireless network connection is activated.

Recommended External Adaptor Information

Power adaptor output rating: 5.0 V DC, 2.5 W – 5.0 W.
Energy efficiency rating: Level VI or complies with corresponding regional or national laws and regulations.

Brand and Trademark Information

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

This product is homologated by Anatel, in accordance with the regulated procedures for conformity assessment of telecommunications products and meets the applicable technical requirements.

	JBL Xtreme 4 Portable Waterproof Speaker: Technical Specifications and Features Detailed technical specifications, features, and usage information for the JBL Xtreme 4 portable waterproof speaker, including Bluetooth connectivity, charging, powerbank functionality, and IP67 rating.
	JBL Xtreme 3 Portable Bluetooth Speaker - Quick Start Guide and Specifications Learn how to set up and use your JBL Xtreme 3 portable Bluetooth speaker. This guide covers Bluetooth pairing, PartyBoost, charging, IP67 water resistance, and detailed technical specifications.
	JBL Charge 5 Quick Start Guide - Portable Bluetooth Speaker Get started with your JBL Charge 5 portable Bluetooth speaker. This guide covers unboxing, Bluetooth pairing, music playback, PartyBoost, the JBL Portable app, charging, powerbank functionality, IP67 water and dust resistance, technical specifications, and important safety information.
	JBL Clip 4 Quick Start Guide Get started with your JBL Clip 4 portable Bluetooth speaker. This guide covers setup, pairing, playback, charging, technical specifications, and safety information.
	JBL Xtreme 3 Quick Start Guide A comprehensive guide to setting up, connecting, and using your JBL Xtreme 3 portable Bluetooth speaker, including features like PartyBoost, the JBL Portable app, and technical specifications.
	JBL Wind 3S Quick Start Guide and Technical Specifications Get started with your JBL Wind 3S portable Bluetooth speaker. This guide covers bicycle mount installation, device features, Bluetooth pairing, charging, IP67 water and dust resistance, technical specifications, and important safety information.
	JBL GO3 Portable Waterproof Speaker User Manual - Features, Specs, and Guide Comprehensive user manual for the JBL GO3 Portable Waterproof Speaker. Learn about its features, benefits, technical specifications, what's in the box, and more. Get detailed information on this compact, IP67 rated Bluetooth speaker.
	JBL Boombox 3 Quick Start Guide Get started with your JBL Boombox 3 portable Bluetooth speaker. This guide covers setup, Bluetooth pairing, playback, charging, powerbank features, IP67 water and dust resistance, and technical specifications.