Motorola MOTO BUDS 100 Quick Start Guide
Model No.: MOTO BUDS 100
Frequency Band: 2.402 - 2.480GHz
Maximum RF power: 6 dBm
FCC ID: 2ARRB-VB100
IC: 20353-VB100
Working temperature: -10°C-45°C
1. Charging
Fully charge before use.
The device can be powered through a micro USB from any CE compliant power source that implements the European interface as requested by EN 301 489-52.
LED Indicator:
- Charging: Red steady
- Fully charged: Off
- Battery low: Red flash
2. Pairing
Steps:
- Ensure both buds are inside the charging case and take out both buds. The buds will flash blue and red.
- Select "MOTO BUDS 100" from the smartphone Bluetooth menu.
LED Indicator:
- Pairing: Red-blue flash
- Standby: Blue flash
3. Fitting
Steps:
- Insert the MOTO BUDS into your ear and rotate to fit comfortably.
- To optimize the best fit and audio experience, it is recommended to try different earbud sizes.
4. Basic Operation
- Single Press MFB: Receive incoming call and on hold ongoing call
- MFB 2sec: Reject a call
- Double press MFB and then hold MFB for 5 second until LED shows blue and red: Factory reset
- Put both buds into the charging case
Additional Operation
Factory reset:
- Ensure earbuds are not connected to phone
- Double press MFB and then hold MFB for 5 seconds until LED shows blue and red
- Put both buds into the charging case
LED Indicator Summary
- Pairing: Red-blue flash
- Standby: Blue flash
- Charging: Red steady
- Fully charged: Off
- Battery low: Red flash
Anatel Information
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.
Agência Nacional de Telecomunicações
06753-21-08069
Para maiores informações, consulte o site da Anatel - https://www.gov.br/anatel/pt-br/
