MEAN WELL HBG-1oo Series 100W Constant Current Mode LED Driver User Guide

User Guide for MEAN WELL models including: HBG-1oo Series 100W Constant Current Mode LED Driver, HBG-1oo Series, 100W Constant Current Mode LED Driver, Constant Current Mode LED Driver, Current Mode LED Driver, Mode LED Driver, LED Driver, Driver
HBG-100

欧诗全

HBG-100-24 MEAN WELL - РКС Компоненти - РАДІОМАГ
File Info : application/pdf, 9 Pages, 2.58MB
hbg-100-spec
100W Constant Current Mode LED Driver

HBG-100 series
User's Manual

(for DA Type only)

  IP65 IP67


 

















IS 15885(Part 2/Sec13)

THOMAS SAMUEL

THOMAS SAMUEL

R-41027766
(for 36A,48A,60A only)











 

 
 

 
      
       

 
A   

   

     

    


     

Downloaded from Arrow.com.

File Name:HBG-100-SPEC 2024-01-08

100W Constant Current Mode LED Driver

HBG-100 series

SPECIFICATION

MODEL

HBG-100-24

HBG-100-36

HBG-100-48

OUTPUT

RATED CURRENT

4A

2.7A

RATED POWER

96W

97.2W

CONSTANT CURRENT REGION Note.2 14.4 ~ 24V

21.6 ~ 36V

OPEN CIRCUIT VOLTAGE(max.) 25V

37V

CURRENT ADJ. RANGE

Adjustable for A/AB-Type (via built-in potentiometer)

2.4 ~ 4A

1.62 ~ 2.7A

CURRENT RIPPLE

5.0% max. @rated current

CURRENT TOLERANCE

±5.0%

SETUP TIME

Note.4 2000ms / 115VAC 500ms / 230VAC

VOLTAGE RANGE

90 ~ 305VAC 127 ~ 431VDC Note.3 (Please refer to "STATIC CHARACTERISTIC" section)

2A 96W 28.8 ~ 48V 49V
1.2 ~ 2A

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR

PF>0.96/115VAC, PF>0.96/230VAC, PF>0.94/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

HBG-100-60 1.6A 96W 36 ~ 60V 62V
1.0 ~ 1.6A

INPUT

TOTAL HARMONIC DISTORTION

THD< 20%(@load60%/115VC,230VAC; @load75%/277VAC) (Please refer to "TOTAL HARMONIC DISTORTION(THD)" section)

EFFICIENCY (Typ.) Note.5 90.5%

91%

91%

AC CURRENT (Typ.)

1.1A / 115VAC 0.5A / 230VAC 0.45A / 277VAC

INRUSH CURRENT (Typ.)

COLD START 60A(twidth=550s measured at 50% Ipeak) at 230VAC; Per NEMA 410

91.5%

MAX. No. of PSUs on 16A CIRCUIT BREAKER

4 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 277VAC

OVER CURRENT

95 ~ 108% Constant current limiting

PROTECTION OVER VOLTAGE

28 ~ 35V

41 ~ 49V

Shut down o/p voltage re-power on to recovery

54 ~ 63V

65 ~ 75V

OVER TEMPERATURE

WORKING TEMP.

MAX. CASE TEMP.

ENVIRONMENT

WORKING HUMIDITY STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

Shut down o/p voltage re-power on to recovery Tcase=-40 ~ +85 (Please refer to " OUTPUT LOAD vs TEMPERATURE" section) Tcase=+85 20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH ±0.03%/ (0 ~ 50)

VIBRATION

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY STANDARDS

DALI STANDARDS

SAFETY & WITHSTAND VOLTAGE

EMC

ISOLATION RESISTANCE

UL8750(type"HL"),CSA C22.2 No.250.13-12, ENEC BS EN/EN61347-1,BS EN/EN61347-2-13 independent, BS EN/EN62384; GB19510.1,GB19510.14, BIS IS15885(for 36A,48A,60A only), EAC TP TC 004,IP65 or IP67 approved Compliance to IEC62386-101, 102, 207 for DA-Type only
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH

EMC EMISSION

Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (@load60%) ; BS EN/EN61000-3-3, GB/T 17743 ,GB17625.1, EAC TP TC 020

OTHERS

EMC IMMUNITY
MTBF DIMENSION PACKING

Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547,light industry level (surge immunity:Line-Earth:4KV, Line-Line:2KV), EAC TP TC 020 2433.4K hrs min. Telcordia SR-332 (Bellcore) ;299.3K hrs min. MIL-HDBK-217F (25) 130mm *66.5mm (D * H)
1.18Kg; 12pcs/15.7Kg/1.43CUFT(Blank/A/B Type),1.89CUFT(E Type)

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. Please refer to "DRIVING METHODS OF LED MODULE". 3. De-rating may be needed under low input voltages. Please refer to "STATIC CHARACTERISTIC" sections for details. 4. Length of set up time is measured at cold first start. Turning ON/OFF the driver may lead to increase of the set up time. 5. The DA type power supply is less efficient than the typical efficiency in specification by 1%. 6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected
by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 7. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75 or less. 8. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com 9. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 10. For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
 Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

Downloaded from Arrow.com.

File Name:HBG-100-SPEC 2024-01-08

100W Constant Current Mode LED Driver
BLOCK DIAGRAM

EMI FILTER

I/P

&

RECTIFIERS

FG

PFC CIRCUIT

POWER SWITCHING

O.T.P.

O.L.P.

PWM & PFC CONTROL

HBG-100 series

fosc : 100KHz

RECTIFIERS

+V

& FILTER

-V

O.C.P.

DETECTION CIRCUIT

O.V.P.

DRIVING METHODS OF LED MODULE

 This series works in constant current mode to directly drive the LEDs.

Vo(%)

100
60 (min.)

Constant Current area

In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL.

Hiccup Protection

50

100

Io(%)

Typical output current normalized by rated current (%)

Downloaded from Arrow.com.

File Name:HBG-100-SPEC 2024-01-08

100W Constant Current Mode LED Driver

HBG-100 series

DIMMING OPERATION

AC/L(Brown) AC/N(Blue)
FG (Green/Yellow)

SJTW 18AWG*3C

SJTW 18AWG*2C

+V(Red) -V(Black)

* DIM+ for B/AB-Type DA+ for DA-Type
* *DIM- for B/AB-Type DA- for DA-Type

**DIM-(Pink) *DIM+(Purple)

UL2517 22AWG*2C

 3 in 1 dimming function (for B/AB-Type)
Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
1 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100A (typ.)

 Applying additive 1 ~ 10VDC
100%

90%

Output current (%)

+V +

+

80%

70%

-V

-

60%

DIM+

50%

+

40%

Additive Voltage

-

30%

DIM-

20%

"DO NOT connect "DIM- to -V"

10% 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V

Dimming input: Additive voltage

 Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):

+V +

+

-V

-

DIM+

Additive PWM signal

DIM-

"DO NOT connect "DIM- to -V"

 Applying additive resistance:

+V +

+

-V

-

DIM+

Additive Resistance DIM-

"DO NOT connect "DIM- to -V"

Output current (%)

Output current (%)

100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input
100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity forsynchronized dimmingoperation)
Dimming input: Additive resistance

Downloaded from Arrow.com.

File Name:HBG-100-SPEC 2024-01-08

100W Constant Current Mode LED Driver

HBG-100 series

Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options.

N FG L

Relay

Switch

Adjuster

10K/N~100K/N Ohms resistance 1~10V DC Voltage 10V PWM Signal

Green/ Yellow
Brown
Blue

AC/L AC/N

HBG-100 B-Type

DIM+ DIM-
V(-) V(+)

Purple Pink
Black Red

LED Lighting Fixture

Using a switch and relay can turn ON/OFF the lighting fixture.

 DALI Interface (primary side; for DA-Type) Apply DALI signal between DA+ and DA-. DALI protocol comprises 16 groups and 64 addresses. First step is fixed at 8% of output.

Downloaded from Arrow.com.

File Name:HBG-100-SPEC 2024-01-08

LOAD (%)

100W Constant Current Mode LED Driver

HBG-100 series

OUTPUT LOAD vs TEMPERATURE(Note.8)

PF
LOAD (%)

100
80 230VAC Input only
60 50 40
20

100
80 230VAC Input only
60
40
20

-40 -25

-10 0

15

30

50

60

70 (HORIZONTAL)

AMBIENT TEMPERATURE,Ta ()

-40 -25 0

10

30

50

70

85

90 (HORIZONTAL)

Tcase ()

LOAD (%)

STATIC CHARACTERISTIC
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
INPUT VOLTAGE (V) 60Hz De-rating is needed under low input voltage.

POWER FACTOR (PF) CHARACTERISTIC
 Tcase at 75

1 0.99 0.98 0.97 0.96 0.95 0.94 0.93 0.92 0.91
50% 60% 70% 80% 90% 100%
(100W)
LOAD

277V 230V 115V

TOTAL HARMONIC DISTORTION (THD)

 48V Model, Tcase at 75

18%

16%

14%

12%

277VAC

10% 230VAC
8%
115VAC 6%

4%

2%

0%

50%

60%

70%

80%

90%

100%

LOAD

EFFICIENCY(%)

EFFICIENCY vs LOAD
HBG-100 series possess superior working efficiency that up to 91% can be reached in field applications.  48V Model, Tcase at 75

94 92 90 88 86 84 82 80 78 76
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

277V 230V 115V

LOAD

THD

Downloaded from Arrow.com.

File Name:HBG-100-SPEC 2024-01-08

100W Constant Current Mode LED Driver
LIFE TIME

HBG-100 series

LIFETIME(Kh)

120 100
80 60 40 20
0 25 30 35 40 45 50 55 60 65 70 75 80 85
Tcase ( )

Downloaded from Arrow.com.

File Name:HBG-100-SPEC 2024-01-08

100W Constant Current Mode LED Driver

HBG-100 series

113 M10*P1.5*18h
3

MECHANICAL SPECIFICATION
 Blank-Type
113 130
20

Case No.217 Unit:mm

66.5
52.5 8.5

300±20

AC/L(Brown)

tc

AC/N(Blue)

FG (Green/Yellow) SJTW 18AWG*3C

200±20 SJTW 18AWG*2C

+V(Red) -V(Black)

4-6.0
tc : Max. Case Temperature.(case temperature measured point) Ta: Ambient Temperature measured point

150 45° Ta

113 M10*P1.5*18h
3

 A-Type

113 130

20

300±20

AC/L(Brown)

tc

AC/N(Blue)

FG (Green/Yellow) SJTW 18AWG*3C

66.5
52.5 8.5

200±20 SJTW 18AWG*2C

+V(Red) -V(Black)

14.74

33.61

4-6.0

150 45° Ta

tc : Max. Case Temperature.(case temperature measured point) Ta: Ambient Temperature measured point

 B/DA-Type

113 130

66.5
52.5 8.5

300±20

AC/L(Brown)

tc

AC/N(Blue)

FG (Green/Yellow) SJTW 18AWG*3C

113 M10*P1.5*18h
3

20 4-6.0

**DIM-(Pink) *DIM+(Purple)
* DIM+ for B-Type DA+ for DA-Type
* *DIM- for B-Type DA- for DA-Type

tc : Max. Case Temperature.(case temperature measured point) Ta: Ambient Temperature measured point

300±20
UL2517 22AWG*2C 150 45°
Ta

200±20 SJTW 18AWG*2C

+V(Red) -V(Black)

Downloaded from Arrow.com.

File Name:HBG-100-SPEC 2024-01-08

100W Constant Current Mode LED Driver

HBG-100 series

113 M10*P1.5*18h
3 14.74

 AB-Type

113 130

20 4-6.0

66.5
52.5 8.5

AC/L(Brown) tc AC/N(Blue)
FG (Green/Yellow)

300±20 SJTW 18AWG*3C

DIM-(Pink) DIM+(Purple)

300±20
UL2517 22AWG*2C 150 45°

Ta

200±20 SJTW 18AWG*2C

+V(Red) -V(Black)

33.61

tc : Max. Case Temperature.(case temperature measured point) Ta: Ambient Temperature measured point

INSTALLATIONS

Hanger

Chain

Spot Light

High Bay Light

Stage Light

Caution
 Please inspect the appearance of the driver if the package is damaged. There should not be any cracks.
 Please do not drop or bump the driver.
 All screws including the suspension screw should be paired with a spring washer and locked tight.
 The entire luminaire, including the driver, should be limited to 10Kg or less.
 The luminaire should be cautiously protected from damage due to shock throughout packaging and transportation.
 Please thoroughly follow the preceding cautionary notes to prevent the luminaire from falling, leading to injuries.

File Name:HBG-100-SPEC 2024-01-08

Downloaded from Arrow.com.
HBG-100

欧诗全

References
