Fast Operation Guide & Compliance
Product Parameter
- Bluetooth version: V5.4
- Transmission distance: 10m
- Charging port: Type-C
- Bluetooth frequency: 2.402-2.480GHZ
- Rated input: 5V-300mA
- Charging time: 1h
- Music time: 4.5h
- Talk time: 4.5h
- Headphone battery capacity: 30mAh
- Battery capacity: 300mAh
Product Inventory
The product package typically includes: Left earphone, Right earphone, Charging case, and a charging cable.
Product Diagram
The diagram illustrates the components: Left ear touch area, Left earphone, Right ear touch area, Right earphone, Touch smart screen (on charging case), Reset key (located on the back of the charging case), and Type-C charging port.
Opening and Connecting
Open the charging case. The earphones will automatically pair. To connect to your device, search for the Bluetooth name and select it.
Earphone Touch Command
- Tap x1: [Play/Pause Music, Answer/End Call]
- Hold (2s): [Reject Call, Next Track]
- Slide: [Volume Control, Previous Track]
Smart Screen Touch Command
- Tap x1: [Display Status/Menu Selection]
- Hold (2s): [Power On/Off, Mode Switch]
- Slide: [Navigation/Adjustment]
Functional Overview Diagram
This diagram visually represents the core functions of the Bluetooth headset, such as pairing, music playback, call management, and charging.
Reset Function
To reset the device to its factory settings, hold down the reset key on the back of the charging case for 5 seconds. This will reset the boot screen.
Matters Needing Attention
- Control volume and usage time reasonably to avoid hearing damage.
- Do not use headphones in potentially dangerous environments for safety.
- Avoid using headphones while driving to prevent distraction and danger.
- Keep earphones out of reach of children to prevent accidental misuse.
- Avoid storing or using headphones at temperatures below -20°C or above 45°C, as this can shorten lifespan.
- Do not disassemble, repair, or modify the product yourself.
- The battery is not replaceable. Dispose of or recycle according to local regulations. Do not discard in fire.
- If not used for a long time, charge the headset every 3 months to extend battery life.
- Do not expose the battery to high temperatures like sunshine or fire.
- Ensure the charger's output voltage and current do not exceed 5V/1A. Exceeding this limit may cause serious damage and void the warranty.
- Dispose of waste electronic products correctly; do not mix with household garbage.
- Charge in a safe environment. Disconnect the charging cable promptly after the charging case is full to prevent battery damage from prolonged charging.
Certificate of Conformity
Product Number: [Value not specified in OCR]
Production Date: [Value not specified in OCR]
Inspector: [Value not specified in OCR]
QC Status: PASS ✔️
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution:
Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.