LX12 Magnetic Wireless Charging Power Bank
Thank you for purchasing our product. In order to give you a better experience, please carefully read and strictly follow the instructions and precautions before use and keep the instructions properly for reference.
The LX12 is a magnetic wireless charging power bank with a capacity of 5000mAh. It features a USB-C input/output port and supports wireless charging up to 15W. The device is designed for convenient magnetic attachment with compatible smartphones. The device features a wireless charging area on one side, status indicator lights, a USB-C port, and a power button. Certified: [CE certified], [FCC certified], [RoHS compliant]
Charging Instructions
Charging the Power Bank
Use a USB-C charging cable to connect the power bank's USB-C port to a charger or computer. A charger with 18W or higher is recommended for fast charging. The indicator light shows green during fast charging and is off during normal charging. The indicator light flashes during charging and stays solid when fully charged.
Charging Devices via USB-C
Connect a suitable charging cable to the power bank's USB-C port and then to your phone or digital device to begin charging.
Charging Devices via Wireless
Place your wireless-charging-compatible phone or device onto the power bank's wireless charging area. For devices that do not automatically activate wireless charging, press the power button to turn on the power bank first. The power bank's wireless charging area contains a strong magnet for magnetic attachment with compatible smartphones, enhancing charging convenience. A slight warming of the product surface during wireless charging, not exceeding 45°C, is normal. If the temperature exceeds 45°C, stop use immediately and contact support.
Power and Status Indicators
Power Display
The power button can be short-pressed to turn on the power bank and display the current battery level. The power level is indicated by white LED lights:
| Sequence | Illustration | Indicator Light Status | Battery Power |
| 1 | [1 white LED flashing] | 1 white light flashing | Below 5% |
| 2 | [1 white LED solid] | 1 white light solid | 5%~25% |
| 3 | [2 white LEDs solid] | 2 white lights solid | 25%~50% |
| 4 | [3 white LEDs solid] | 3 white lights solid | 50%~75% |
| 5 | [4 white LEDs solid] | 4 white lights solid | 75%~100% |
Charging Status Display
The indicator lights show the charging status of the power bank:
| Sequence | Illustration | First Light Display Status | Status Description |
| 1 | [Light off] | Light off | USB-C port for normal charging |
| 2 | [Green light solid] | Green light on | USB-C port for fast charging |
| 3 | [Red light solid] | Red light on | Wireless charging normal output |
| 4 | [Red light flashing] | Red light flashes | Wireless charging abnormal output |
Specifications
| Item | Details |
| Product Name | Magnetic Battery |
| Model | LX12 |
| Rated Capacity | 5000mAh (19.25Wh) |
| Input | 5V=2A, 9V=2A, 12V=1.5A |
| Output (USB-C) | 5V=3A, 9V=2.22A, 12V=1.67A |
| Wireless Output | 5W, 7W, 10W, 15W Max |
| Material | Aluminum Alloy + ABS |
| Weight | 115g |
| Dimensions | 96mm x 66mm x 9mm |
Safety Precautions and Warnings
For Proper Use
- Please follow the instructions in this User Guide to use this product properly.
Repair Services
- Do not disassemble this product. Only authorized personnel are allowed to repair this product to avoid safety accidents.
Charging Instructions
- This product can only be charged with a charger that meets its charging parameters.
- If the status indicator light does not work properly during charging after a long period of disuse, please charge for 30 minutes for observation.
Warnings
- Damages caused by using a charger with unfitting parameters are not covered by the warranty and may lead to other hazards.
- If the battery temperature reaches 45°C, the charging protection function will be triggered, and charging will be discontinued. The recommended ambient temperature for charging is 0°C to 30°C.
- Do not dismantle or modify the product.
- Do not store the product in wet conditions.
- Do not charge or use the product near heat sources.
- Do not allow water or any other liquid to flow into the product's interface, as this could cause damage.
- Avoid direct sunlight.
- Keep away from children and pets to prevent accidental ingestion.
- Stop using the product if overheating occurs.
- Please use a dry soft cloth to wipe; avoid using harsh chemicals or strong detergents.
RoHS Compliance Information
The following table indicates the presence of hazardous substances in the product's components, in accordance with SJ/T 11364-2014 and GB/T 26572-2011 standards. '0' indicates the substance is below the regulated limit, and 'X' indicates it exceeds the limit in at least one homogeneous material. Some components may exceed limits for certain hazardous substances due to production processes, but these are within EU hazardous substance exemption categories.
| Component Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
| Internal Metal Parts | 0 | 0 | 0 | 0 | 0 | 0 |
| Internal Non-metal Parts | 0 | 0 | 0 | 0 | 0 | 0 |
| Circuit Board | X | 0 | 0 | 0 | 0 | 0 |
| Lithium Battery | 0 | 0 | 0 | 0 | 0 | 0 |
| USB Charging Cable | 0 | 0 | 0 | 0 | 0 | 0 |
| Other Parts | 0 | 0 | 0 | 0 | 0 | 0 |
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.