Introduction
This document provides detailed instructions for the operation and installation of the Bosch D7212G Control/Communicator. It is designed to be used exclusively with the D7212G model and should not be referenced in conjunction with other Bosch security system panels such as the D9412G, D7412G, D9412, D9112, D9112B1, D7412, D7212, or D7212B1.
The guide covers essential aspects including system configuration, power supply management, telephone line connections, and the setup of various system components like on-board points, off-board points, relays, and arming devices. It also details the use of SDI devices and programmer/accessory connections.
For comprehensive system wiring diagrams and point address charts, refer to the appendices.
Key Features and Sections
- System Overview: Details operational specifications and standard features of the D7212G.
- Installation Procedures: Step-by-step guidance for setting up the control panel, including power connections and module installations.
- Power Supply and Outputs: Information on primary and secondary power sources, battery management, and available power outputs.
- Telephone Connections: Instructions for connecting the unit to the telephone network and configuring communication settings.
- Component Integration: Guidance on connecting and configuring various system components such as POPIT modules, OctoPOPITs, OctoRelays, Command Centers, and SDI devices.
- Programming and Testing: Information on panel programming and system testing procedures.
Related Documentation
For additional information and specific component instructions, please consult the related documentation listed in Table 2 of the guide. Contact Bosch Security Systems Technical Support for assistance in obtaining these documents.
Regulatory Information
The D7212G complies with FCC Rules Part 15 and Part 68. Specific details regarding FCC registration number and ringer equivalence number (REN) are provided for connection to the public telephone network.
