SFP2 surface finish probe for the REVO® system
Instructions for RENISHAW models including: SFM-A1, Surface Finish Probe Module, Finish Probe Module, Probe Module, SFM-A1, Module
Manuals and installation guide downloads
Handleidingen en te downloaden installatiegidsen
File Info : application/pdf, 2 Pages, 174.95KB
DocumentDocumentSFM-A1 Surface finish probe module Enhanced access and inspection capability for integrated surface finish measurement The SFP2 system consists of a probe and a range of SFM modules which have been designed to suit the demands of specific parts and features encountered in a precision manufacturing environment. The probe and modules can be automatically interchanged with all other REVO® probe options, providing the flexibility to easily select the optimum tool to inspect a wide range of features. Each SFM module is its own miniature measuring device, incorporating Renishaw's proprietary encoder system to transduce the motion of the stylus tip. Features The A-series of modules is designed to deliver high performance with a good level of capability to access part features. Typical applications General purpose; engine block gasket face. Specification Diamond tip radius (µm) Surface finish measurement range (µm) 2 µm modules 5 µm modules Typical surface finish accuracy (of nominal Ra) * Skid / stylus arrangement Skid material Nominal stylus tip protrusion beyond skid (mm) Skid length / radius (mm) Skid width / radius (mm) Skid contact force (N) Stylus contact force (N) SFM / SFH knuckle adjustment range Weight (g) Resolution (nm) Measurement speed (mm/s) Stylus holder compatibility Lateral scanning capability 2 or 5 6.3 to 0.05 Ra 6.3 to 0.10 Ra ±(5% + 15 nm) Side-by-side DLC coated stainless steel 0.5 4 / 40 2 / 12.5 0.2 0.003 ±90° 12 1 Up to 1 SFH-1, SFH-2 Yes * Accuracy values are dependent upon a number of system variables. These include the machine size and configuration, scan orientation, condition of stylus tip, part fixturing system and environmental noise. www.renishaw.com/SFP2 #renishaw Ø11.3 All dimensions in mm. 65.6 24.4 Detail A 7.9 6.4 Detail B 3.2 R40 4 2 R12.5 R0.002 / R0.005 Detail A Detail B www.renishaw.com/SFP2 +44 (0) 1453 524524 uk@renishaw.com © 20172021 Renishaw plc. All rights reserved. RENISHAW® and the probe symbol are registered trade marks of Renishaw plc. Renishaw product names, designations and the mark `apply innovation' are trade marks of Renishaw plc or its subsidiaries. Other brand, product or company names are trade marks of their respective owners. Renishaw plc. Registered in England and Wales. Company no: 1106260. Registered office: New Mills, Wotton-under-Edge, Glos, GL12 8JR, UK. WHILE CONSIDERABLE EFFORT WAS MADE TO VERIFY THE ACCURACY OF THIS DOCUMENT AT PUBLICATION, ALL WARRANTIES, CONDITIONS, REPRESENTATIONS AND LIABILITY, HOWSOEVER ARISING, ARE EXCLUDED TO THE EXTENT PERMITTED BY LAW. #renishaw Part no.: H-1000-2290-05-A Issued: 10.2021