Rexing V1P SE User Manual
The information in this manual is subject to change without notice. Rexing All Rights Reserved www.rexingusa.com 202307REV1
Activate Your Warranty & Free Gift
Activate your 18-month warranty and choose your FREE gift! Activate within 30 days of purchase to claim your free gift and extend your limited 12-month warranty to 18 months.
Scan the QR code to activate and select your free gift.
A graphic of a gift box containing a QR code, indicating where to scan for activation and gift selection.
About Us
Thank you for choosing REXING!
We hope you love your new products as much as we do. If you need any assistance, or have any suggestions to help us improve, please contact us.
- Email: care@rexingusa.com
- Phone: (877) 740-8004
Our support team will respond to you as soon as possible. Always a surprise in Rexing.
Check us out here:
- Facebook: https://www.facebook.com/rexingusa/
- Instagram: https://www.instagram.com/rexingdashcam/
- Product Registration: https://www.rexingusa.com/support/registration/
- Product Support: https://www.rexingusa.com/support/product-support/
[Facebook Icon] [Instagram Icon] [Site Icon] [Product Support Icon]
Package Contents
The package includes the following items:
- Rexing V1P SE Dash Cam
- Rear camera with rear camera cable
- Mini-USB Cable (for transfer files only)
- Mount Plate & 3M Adhesive
- Cable Clips
- Car Charger
- Cable Management Tool
- Safety Guide
- User Manual
- Warning Sticker
- Electrostatic Sticker
- CPL Filters (2pcs)
Visuals of all 12 package contents are displayed.
Camera Overview
The dash cam has the following components:
- 1. Micro SD Card Slot
- 2. Power Button
- 3. Reset Button
- 4. Menu Button
- 5. Mode Button
- 6. REC (Record) Button
- 7. OK (Confirm) Button
- 8. MIC (Microphone) Button
- 9. Screen Button
- 10. Mini-USB Power Port
- 11. Rear Camera Port
- 12. Lens Angle Adjustment Dial
Diagrams show the front, side, and top views of the dash cam with numbered callouts indicating each component.
Screen Icons and Indicators
The dash cam display shows various icons and indicators during operation:
- Recording Mode
- Recording (On)
- WDR Mode (On)
- G-Sensor Sensitivity Level
- Recording Time (Current Clip)
- Video Resolution
- Parking Mode (On)
- GPS Signal (not connected)
- Memory Card (Inserted)
- Time (24H)
- Current Date Time
- MIC (Off)
- Exposure Value
- Loop Recording Time Interval
- GPS Signal (connected)
- Battery Charging
- Plate Number
- MIC (On)
Note: Please connect a Smart Hardwire Kit or an Intelligent Hardwire Kit to activate the parking monitor feature.
Two mockups of the dash cam screen display various icons and their meanings, including recording status, GPS connectivity, and battery level.
Get Started
Step 1: Installing the Electrostatic Stickers
1.1 Prepare Your Windshield
Thoroughly cleanse your windshield with either water or alcohol. Follow this by wiping it dry using a clean, dry cloth to ensure a spotless surface.
1.2 Position the Sticker
Carefully peel off the protective film from the electrostatic sticker. Attach the sticker to the windshield, ideally behind the rear-view mirror. This position is recommended to avoid obstructing your view while you're on the road.
Diagram showing a car windshield with a rear-view mirror. An arrow points to the area behind the mirror labeled 'Electrostatic sticker'.
Step 2: Installing Adhesive Mount
Place the 3M adhesive on the mount plate and properly orient the mount piece to the roof and hood line of the vehicle.
Secure the Mount and Camera
Remove the 3M tape from the mount. You can then proceed to fix both the mount and camera onto the previously positioned electrostatic stickers.
Step 3: Mount the Rear Camera
Mount the rear camera as shown below. Use the included rear camera cable to connect the rear camera to the front camera.
Diagram showing the front dash cam, the rear camera, and the cable connecting them. A separate diagram illustrates the typical routing of the rear camera cable within a vehicle. Callouts: 'Plug the rear camera into the rear camera port', 'Rear camera wiring instructions'.
Step 4: Install the CPL Filters
Place the CPL filter on top of the dash cam's front and rear lens. Use a small screwdriver to fix the CPL filter to the lens with screws (optional). Hold and rotate the filters to adjust the level of glare.
Diagrams illustrating the attachment of CPL filters to the dash cam lenses and indicating rotation for glare adjustment.
Step 5: Insert the Memory Card
The Rexing V1P SE accepts Class 10/ UHS-1 or higher Micro SD memory cards up to 512GB. You will need to insert a memory card before recording. Before inserting or removing a memory card, ensure you've powered down the device.
Gently push the memory card in until you hear a click, and allow the spring release to push the card out.
Diagram showing a Micro SD card being inserted into the dash cam. A callout indicates to press and hold the POWER button for 3 seconds to turn off the device before insertion or removal.
Step 6: Power on the Camera and Format the Memory Card
Place the camera on the mount and carefully route the power cable around the windshield and tuck it in under the trim.
Power the camera by connecting the charger to the car cigarette lighter and the camera.
Diagram illustrating the routing of the power cable from the dash cam to the car's power outlet via the cigarette lighter adapter. Callouts: 'Plug the mini USB connector to the dash cam', 'Route the power cable', 'Plug the charger into the power outlet or a cigarette lighter'.
The camera will shut down after 3 seconds when it's disconnected from the power source and should begin recording automatically the next time it is powered on.
To ensure the V1P SE records to your memory card properly and without error, we strongly recommend you to format the card within the camera when you're using the dash cam for the first time.
Note: Always remember to back up important data stored on the memory card before formatting.
Formatting the Memory Card
To format the memory card:
- First, press the REC button to stop recording.
- Then, press the MENU button twice to enter the Setup Settings.
- Use the REC and MIC buttons to toggle to the 'Format' option.
- Press the OK button to confirm the format.
Diagram of the dash cam's setup menu, showing the 'Format' option. A confirmation dialog is also shown with 'Cancel' and 'OK' options.
Basic Operation
Device Power
The device is automatically powered on when plugged into a 12V accessory socket or cigarette lighter and receives a charge (i.e., the vehicle is started).
To turn the device on manually, press and hold the POWER button until the welcome screen appears.
The camera will automatically start recording when power is on.
Diagram of the dash cam side view, with a callout indicating the POWER button for manual activation.
Menu Settings
Power the camera on, then press the REC button to stop recording. Press the MODE button to switch among video mode, image mode, and playback mode.
Press the MENU button once to enter the Video Settings, or press the MENU button twice to enter the Setup Settings menu.
Diagram of the dash cam's menu interface, showing video settings and navigation options. Callouts indicate how to enter menus and change modes.
Video Recording
The camera will automatically start recording when the device receives a charge. The LED lights and the red dot will blink when the device is recording. Press the REC button to stop recording.
Diagram of the dash cam's recording screen, highlighting the indicators that turn red during active recording.
Video Playback
To playback a video on the device, press the REC button to stop recording. Press and hold the MODE button twice to enter the Playback mode. Use the REC and MIC buttons to toggle to the desired video. Press the OK button to play.
During playback, use the OK (pause), MIC (fast forward), and REC (rewind) buttons to control the video playback.
Diagram of the dash cam's playback interface, showing video controls and timeline.
To playback a video using an SD card reader, remove the memory card and insert it into an SD card adapter. Place the adapter in the computer.
Diagram illustrating an SD card being inserted into an SD card adapter.
Parking Monitor (Parking Surveillance Mode)
The parking monitor provides surveillance on your parked vehicle. When the engine is off, the hardwire kit is used to provide continuous power and protect your car battery from being discharged.
Option 1: Vibration Detection
To enable the Parking Monitor, you'll need to connect it with a Smart Hardwire Kit (UPC: 857080006565, sold separately).
Simplified wiring diagram for the hardwire kit, showing connections for Battery, ACC (Accessory), and Ground.
This feature will allow the dash cam to switch to parking mode automatically if the vehicle's engine turns off and switch back to normal recording after the vehicle's engine turns on.
Gravity Sensing Record:
The Gravity Sensing detects significant or sudden movement (such as an impact or collision) and will trigger an event recording. We suggest setting the "Gravity Sensing" to High sensitivity for Parking Mode Recording.
Option 2: Motion Detection
To use this feature, you need to connect it with a Rexing Intelligent Hardwire Kit (UPC: 810046603178, sold separately). Make sure that the Parking Mode is turned off on your dash cam, otherwise it may cause a malfunction.
Once the sensor has detected MOTIONS, the intelligent hardwire kit will power up the dash cam automatically and start recording until the MOTION is cleared.
Please visit https://www.rexingusa.com/hwk-install/ to watch a video tutorial about the installation or scan the QR code.
Note: If you do not use the parking mode function, please change the Gravity Sensing sensitivity to low. Otherwise, the video will easily be locked and cannot be deleted by the loop recording function, causing the memory card to fill with locked videos and the recorder to fail to work normally.
Warning: Please DO NOT ENABLE the Parking Monitor function in the settings of the dash cam WITHOUT connecting a smart hardwire kit, as it may cause a malfunction.
Wi-Fi Connect
Step 1
With your dash cam powered on, hold the REC/MIC navigation button to enable the Wi-Fi function. The Wi-Fi name (aka the SSID) and password for the dash cam should be displayed on-screen.
Screenshot of the dash cam's Wi-Fi connection screen, displaying the network name (SSID) and password.
Step 2
On your mobile device, navigate to your Wi-Fi settings. Connect to your dash cam's Wi-Fi by tapping its name when it appears. Enter your dash cam's Wi-Fi password if you are prompted to do so.
Note: On some mobile devices, you may have to try to connect more than once. To ensure you've successfully connected, your mobile device's screen should resemble the examples shown.
Example screenshots of mobile device Wi-Fi settings showing connection to the dash cam's network.
Step 3
Once you're connected to the dash cam, open the Rexing Connect app on your mobile device. Please select "Keep Trying Wi-Fi" if you see the notification on the right.
Notification pop-up on a mobile device asking whether to use cellular data or keep trying the Wi-Fi connection.
Step 4
In the app, hit the "Connect" button to connect to your dash cam, allowing you to access live view and view/download your recordings.
Note: Hold the REC button for 2 seconds to disconnect the Wi-Fi.
Rexing Connect App
Easily download the app by scanning the QR code below or search via the App Store or Google Play.
App Store and Google Play logos, each accompanied by a QR code for app download.
Wi-Fi Connect Troubleshooting
If you cannot connect your phone to the dash cam using the Rexing Connect app, please go to https://www.rexingusa.com/wifi-connect/ or scan the QR code below.
A QR code for Wi-Fi connect troubleshooting.
Built-in GPS Logger
The GPS logger records the speed and location of your vehicle as you drive. You can then access this information while playing back your recordings using the GPS Video player.
Press the MENU button twice and enter the Setup Settings. Toggle to the GPS Speed Unit and select your preferred speed unit.
After a GPS signal is found, the screen icon will turn from blue to green.
Please visit https://www.rexingusa.com/support/videos/ to watch a video tutorial.
Diagrams showing the dash cam screen, illustrating the GPS signal icon changing from blue (searching) to green (connected).
Please download the GPS logger player through the link or scan the QR Code below.
A QR code for downloading the GPS video player.
Taking and Reviewing Photos
To take a photo, press the REC button to stop recording. Press the MODE button twice to enter photo mode. Then press the OK button to take a photo.
To view/delete a photo, stop video recording and enter the Playback Mode. Toggle through the videos and photos to the one you want to view/delete. Press the MENU button once and toggle to the Delete option. Press the OK Button and select Delete Current or Delete All.
Diagrams of the dash cam interface for taking and viewing photos, showing playback controls and delete options. A screenshot of the delete confirmation menu is also shown.
Warranty & Support
Warranty
The Rexing V1P SE Dash Cam comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration/), you can extend the warranty to 18 months.
Support
If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at (877) 740-8004. Queries are typically answered within 12-24 hours.
Your opinion matters
Rexing is firmly committed to always improving our products, services, and user experience. If you have any thoughts on how we can do even better, we welcome your constructive feedback and suggestions.
Connect with us today at care@rexingusa.com
Thank you for choosing Rexing!
FCC Information
FCC ID: 2AW5W-V1PGW
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
[Rexing Logo] [FC Logo] [ROHS Logo] [CE Logo] MADE IN CHINA
HomePage
Login • Instagram
