Xiaomi Mi Watch 2 Lite User Manual and Setup Guide
This document provides instructions for the XIAOMI Mi Watch 2 Lite smartwatch.
Parts of the Watch
The watch includes: Display, heart rate sensor, connection points, function button.
How to Wear
For daily use, wear the watch one finger's width above the wrist bone. Adjust the strap so the heart rate sensor can collect data accurately. Note: If the watch is worn too loosely, it may not filter data properly.
How to Connect
To better use the watch and access additional services, download and install the Xiaomi Wear / Xiaomi Wear Lite app and log in to your Xiaomi account. Note: Instructions within the app may change due to updates; always follow the on-screen guidance.
- Press and hold the function button to turn on the watch. Scan the QR code displayed on the watch with your phone to download and install the Xiaomi Wear / Xiaomi Wear Lite app. The app is also available on the App Store and Google Play.
- Open the app, log in to your Xiaomi account, select "Add Device", and follow the instructions.
Pairing
When two similar codes appear on your phone and watch, press "Pair" to complete the pairing process.
Notes:
- Ensure Bluetooth is enabled on your phone during pairing and that the watch is properly connected to the device.
- If the pairing code appears on your watch but not on your phone, check your phone's notifications for a pairing request.
- If the watch is not found in the app or cannot be paired with your phone, press and hold the function button on the watch for 3 seconds, select restart to restore factory settings, and try again.
How to Use
- View notifications: Swipe down from the top of the main screen.
- Open control panel: Swipe up from the bottom of the main screen.
- Switch apps: Swipe right or left to switch between apps.
- Back: Swipe from left to right to go back to the previous screen.
Charging
Charge the watch immediately when the battery level is low. Connect the charging cable to charge the device.
Strap Attachment/Removal
- Removal: Press the button on the bottom of the watch and pull the strap out.
- Attachment: Push the strap into its slot. You will hear a click when it is attached successfully.