User Manual for INKBIRD models including: MH - 068 Monitor with Temperature, MH - 068, Monitor with Temperature, Temperature
Download – INKBIRD
AIR QUALITY DETECTOR MH - 068 (Basic Version / Wi-Fi Version) 1 / Specifications Product Name: Air Quality Detector Model No: HM-068 Item No: IAQM-068 Detecting Items: CO2 / Temperature / Humidity Material: ABS/Acrylic/Electronic Components/Air Sensors CO2 Range: 400-5000ppm ± (50ppm + 5%) Temperature Range: 0-55 (/ switchable) Humidity Range: 0-99%RH Battery: 2000mAh Working Time: 10-15 Hours LCD Size: 60*60mm Type-C Power Supply: 5V/1A Wi-Fi Supporting (Wi-Fi version only): 2.4GHz Wi-Fi networks+Bluetooth CB3S Size: 80*80*60mm Weight: 200g Working Current: 5V/500mA Rated Power: 5W Standby Current: < 3mA - 1 - Alarm LED Indicator: Red when CO2 1000 ppm; White when CO2 <1000 ppm 2 / Precautions For Use 1) This product should not be dipped in water, nor should it be placed in a high-temperature environment exceeding 60. 2) This product belongs to a precision measuring instrument and shall not be dismantled without authorization. 3) It cannot be measured in the environment of organic gas with too high a concentration for a long time. 4) Built-in lithium battery, when measuring the air quality in the car, please do not put the carbon dioxide monitor with a lithium battery in the sun. - 2 - 3 / Operation Instruction Wi-Fi Connect Icon (Wi-Fi version only) Mute Icon Battery Icon Warning LED Humidity Temperature - 3 - Basic Version / Toggle Set Alarm Value Alarm/LED ON/OFF Power ON/OFF UP Button DOWN Button - 4 - Wi-Fi Version Reset Wi-Fi Connection Set Alarm Value Alarm/LED ON/OFF Power ON/OFF UP DOWN// Button Button - 5 - Power ON/OFF: Press and hold the button for 3 seconds to turn the device on/off. Alarm Function: After startup, press the button once to turn on the LED light. It remains white light when the detected CO2 concentration is below 1000 ppm, and turns red when the detected CO2 concentration exceeds 1000 ppm. Press the button again to enable the alarm sound. The icon will disappear from the screen. When the detected CO2 concentration exceeds 1000 ppm, it will sound five times every 15 seconds. Pressing the button for the third time can turn off the alarm sound and LED light. The icon will reappear on the screen. Whether the CO2 value exceeds the standard is indicated by the LED light, as shown in the following table: White Light Good 400-999ppm No Alarm Red Light Bad over 1000ppm Alarm 5 times every 15s - 6 - Set Alarm Value: Press the button to enter the alarm value setting, then press the or ( on the Wi-Fi version) button to adjust the CO2 value, which can be minimally 1000ppm. / Selection: As to the basic version, press the button to toggle between Celsius and Fahrenheit. As to the Wi-Fi version, press the button to select the temperature unit. Reset Wi-Fi Connection (For Wi-Fi Vesion ONLY): Press the . button to disconnect the device from the APP. If you fail to connect your device with the app, please press the button and try again. 4 / App Connection (for Wi-Fi version only) Search the keyword "INKBIRD" in App store or Google Play, or scan the left QR code to download and install the APP. (If you have previously installed the app, please update it to the latest version.) - 7 - Open the app and enter the login interface. You can log in by your Apple ID or Google ID. You can also click Register and use your email address as prompted to register. - 8 - Click the "+" in the upper right corner to add the device. Then, click the device icon on the app to start connecting. - 9 - Choose a Wi-Fi network and enter the password. Then, click "Next" to the next step. Note: The device only supports 2.4GHz Wi-Fi networks. - 10 - Make sure the device is turned on, then click "Next" to start the connection. - 11 - Connection Succeeded. Notes: 1. During the connection process, it is necessary to ensure that the distance between the device and the mobile phone is within 30 meters, as Wi-Fi is a short-distance connection. 2. During the connection process, please ensure that the device and the mobile phone are in the same Wi-Fi environment and only support the 2.4GHz Wi-Fi signal mode. 3. Please make sure the Bluetooth of your phone is turned on before connecting. - 12 - 5 / Product Warranty This item carries a 1-year warranty against defects in either components or workmanship. During this period, products that prove to be defective will, at the discretion of INKBIRD, be either repaired or replaced without charge. INKBIRD TECH.C.L. support@inkbird.com Factory address: 6th Floor, Building 713, Pengji Liantang Industrial Area, NO.2 Pengxing Road, Luohu Disctrict, Shenzhen, China Office address: Room 1803, Guowei Building, NO.68 Guowei Road, Xianhu Community, Liantang, Luohu District, Shenzhen, China V 1.0Adobe PDF library 15.00 Adobe Illustrator(R) 24.0