User Guide for tp-link models including: 7106510111, UE200, UE306, 7106510111 USB Ethernet Network Adapter, USB Ethernet Network Adapter, Ethernet Network Adapter, Network Adapter, Adapter

7106510111 USB Converter多机型 电子版UG

7106510111 USB Converter多机型 - TP-Link

User Guide. USB to Ethernet Network Adapter. ATTENTION. ♢ When product has power button, the power button is one of the way to shut off the.

2 days ago — ATTENTION. ♢ When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to ...

other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and. (EU)2015/863. The original EU declaration of conformity may be ...

PDF preview unavailable. Download the PDF instead.

7106510111 USB Converter UG
User Guide
USB to Ethernet Network Adapter
ATTENTION
 When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.
 Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
 Keep the device away from water, fire, humidity or hot environments. Recycling
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/ TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/ For technical support, replacement services, the user guide and more information, please visit https://www.tp-link.com/support, or simply scan the QR code.
FCC compliance information statement
Product Name: USB to RJ45 Gigabit Ethernet Network Adapter Model Number: UE200/UE300/UE300C/UE330/UE306 Responsible party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: https://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2023-2-17
Industry Canada Statement CAN ICES-3 (B)/NMB-3(B)
             ,      .

Using the Adapter
This adapter supports Plug and Play feature. Plug in and wait for seconds. Then this adapter is ready to use.
* UE330, UE300 and UE200: For Windows 7/8/8.1, please click to install a driver if prompted to do so. For Windows 7, please click CANCEL if prompted "The program might not have installed correctly" after installation. For Mac OS X 10.8 and older version, please download and install a driver from our official website www.tp-link.com, and search the model number.
* UE300C and UE306: For Windows 7 and Mac OS X 10.9 to 10.15, please download and install a driver from our official website www.tp-link.com, and search the model number.

wired network
RJ45 Port

USB Port *use UE330 as illustration

* Works with Nintendo Switch (Supported by UE306 ONLY)

computer

wired network

USB 3.0

USB

USB

RJ45 Port

UE306

LED Explanation

Nintendo Switch

LED (for UE330) White

Status On

Indication The adapter is properly connected and hub is ready to use

Yellow

On The Ethernet cable is properly connected

Green

Flashing Network data is being transferred

LED (for UE300C, UE300, UE200, UE306)

White

On Both the adapter and Ethernet cable are properly connected

White

Flashing Network data is being transferred

BSMI Notice

           



nit
PCB  

 Lead (Pb)
  -





Mercury Cadmium

(Hg)

(Cd)















 Hexavalent chromium
Cr+6





Polybrominated Polybrominated

biphenyls diphenyl ethers

(PBB)

(PBDE)



















1. 0.1 wt %0.01 wt % Note 1"Exceeding 0.1 wt %"and"exceeding 0.01 wt %"indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 2.  Note 2""indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 3.  Note 3The""indicates that the restricted substance corresponds to the exemption.

Explanation of the symbols on the product label Note: The product label can be found at the bottom of the product (and its .I.T.E power supply).

Caution
Operator's manual
RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.


Adobe PDF library 15.00 Adobe Illustrator(R) 24.0