User Guide for erica synths models including: erica synths, Pico, EF, Pico Series, Module

pico EF instrukcija copy

pico EF instrukcija copy - Erica Synths

26 gen 2021 —

pico EF instrukcija copy - ericasynths.lv

E.F. PICO IN GATE GAIN TRSHLD ATTACK OUT ENV F S M Set the preamp gain. At far clockwise settings the input amplifier will start to clip the audio signal and therefore


File Info : application/pdf, 3 Pages, 959.18KB

PDF preview unavailable. Download the PDF instead.

Pico EF Manual
PICO
E.F.
Thank you for purchasing Erica Synths Pico Series module! With Pico Series we challenged ourselves ­ can we make ANY superior functionality synth module 3HP wide and affordable? Yes, we can.
The Erica Synths Pico Envelope Follower features a preamp with +40dB gain, enough to boost even guitar AND DYNAMIC MICROPHONE signals for use in a modular system, which also can serve as nice overdrive effect, envelope output with adjustable attack time and a gate output with adjustable threshold. The Pico E.F. will be useful as a preamp, overdrive unit, for controlling VCFs in a beat with a drum track to create the acid basslines, to synchronize a modular system to the external instruments, and for other creative and experimental applications.

FEATURES

TECHNICAL SPECS

Preamp with adjustable gain Audio overdrive possibility Envelope follower with adjustable attack time Gate extractor with adjustable threshold Input protection against overvoltage Protection against reverse PSU connection

Preamp boost Audio output level Envelope output level Gate level Power consumption Module width Module depth

up to +40dB 10Vptp 0 - +10V +5V 25mA, -15mA 3HP 35mm

PICO
E.F.

E.F.

Set the preamp gain. At far clockwise settings the input amplifier will start to clip the
audio signal and therefore overdrive effect occurs
Select the attack time of the envelope. Options are Fast, Slow and
Medium. Select the Slow option, if you are controlling the VCF cutoff frequency to design an acid bassline
in beat with a kick drum.

GAIN

TRSHLD

Set the threshold of the Gate extractor circuit. It is a voltage above which the audio signal will trigger the gate ­ see the diagram below! Please note, that, depending on the threshold setting, a same waveform can output various gates

F S M
ATTACK

This is the audio input. Depending on the gain setting, you can use various input signals ­ modular, guitar, dynamic microphone, various sensors, etc. IN

This is the audio output
This is the gate output. The red LED indicates that the gate is on. By
adjusting the threshold potentiometer, you can achieve distinct, rhythmic gates
to control other modules in your rack

OUT ENV

This is the envelope output. The envelope is boosted to +10V level, so you can use it to open VCAs without need to amplify it. The green LED indicates the envelope status

GATE
PICO

GATE - HIGH TRESHOLD

ON

ON

ON

ON
ON
GATE - LOW TRESHOLD

Safety Instructions

Please follow the instructions for use of the Erica Synths module below, `cause only this will guarantee proper operation of the module and ensure warranty from Erica Synths.
Water is lethal for most of the electric devices, unless they are made waterproof. This Erica Synths module is NOT intended for use in a humid or wet environment. No liquids or other conducting substances must get into the module. Should this happen, the module should be disconnected from mains power immediately, dried, examined and cleaned by a qualified technician.
Do not expose the module to temperatures above +50° C or below -20° C. If you have transported module in extreme low temperatures, leave it in room temperature for an hour before plugging it in.
Transport the instrument carefully, never let it drop or fall over. Warranty does not apply to modules with visual damages.
The module has to be shipped in the original packaging only. Any module shipped to us for return, exchange and/or warranty repair has to be in its original packaging. All other deliveries will be rejected and returned to you. Make sure you keep the original packaging and technical documentation.
This device complies to the EU guidelines and is manufactured RoHS conforming without use of led, mercury, cadmium and chrome. Nevertheless, this device is special waste and disposal in household waste is not recommended.

You will find the Erica Synths terms of warranty at www.ericasynths.lv Items for return, exchange and/or warranty repair should be sent us according
to the guidelines on SUPPORT section on www.ericasynths.lv

User manual by Girts Ozolins@Erica Synths Design by Ineta Briede@BLACK8
Copying, distribution or any commercial use in any way is prohibited nd needs the written permission by Erica Synths.
Specifications are subject to change without notice.In case of any questions, feel free to contact us through www.ericasynths.lv.

You will find Erica Synths terms of warranty at

www.ericasynths.lv

Erica Synths Andrejostas St. 43

Riga

Latvia

LV-1045



References

Adobe PDF library 10.01 Adobe Illustrator(R) 16.0