Bonsenkitchen Hand Blender

Important Safeguards

Like any electrical appliance, the Immersion Hand Blender must be handled with care at all times. To ensure your own safety, the following precautions should be followed.

1. BEFORE USING YOUR IMMERSION HAND BLENDER, READ ALL INSTRUCTIONS CAREFULLY.
2. This product is not intended for people (including children) who are physically impaired, have sensory or mental disabilities, or lack relevant experience and knowledge, unless someone responsible for their safety supervises or directs their use of the product.
3. Keep the product and its cables out of the reach of children.
4. The product is intended for home use. It is not intended for commercial use.
5. Please check if the voltage marked on the product matches the local power supply voltage, before connecting the product to the power supply.
6. Keep power cord away from hot surfaces, sharp objects, or open fire.
7. Do not use this product if the plug, power cord, or product is damaged.
8. Do not submerge the power cord in water.
9. Do not let cord hang over the edge of a table or counter, touch hot surfaces, or become knotted, trapped or pinched.
10. Pulling or stumbling over the power cord can result in tilting over or falling of the appliance, causing serious injury.
11. If this appliance begins to malfunction during use, immediately unplug the cord.
12. Always insert the attachment first, then plug cord into the outlet. To disconnect, switch the appliance off, then remove plug from the wall outlet.
13. Always unplug the appliance from power supply if you leave it unattended. After use and before cleaning, always switch off the appliance and disconnect it from power supply by taking the power cord connector out of the electric socket.
14. Do not immerse the MAIN BODY in water. To protect against electrical shock, do not immerse the cord, power plug, or appliance in any liquid, do not rinse under the tap.
15. Never use the appliance for any other purpose than what is described in this instruction book.
16. For indoor use only. Not intended for outdoor use.
17. The product must be allowed to cool before cleaning.
18. Be careful when handling and cleaning the blades. They are very sharp ?.
19. Always turn off the appliance and disconnect it from power socket by pulling the power cord, before doing any of the following: replacing accessories or accessible parts that move during operation, cleaning or maintenance, and assembly and disassembly.
20. If the processed food starts to stick to the appliance (e.g. on BLADE, WHISK), switch off the appliance and clean the accessories carefully.
21. Never insert e.g. fingers, fork, knife, spatula, spoon into rotating parts of the appliance or the accessories.
22. Before you remove the appliance or the drive unit from the container, let the rotating parts stop completely.
23. Make sure that your hair, clothes and accessories do not get into close vicinity to the rotating parts.
24. Make sure that the power supply cable does not get between the rotating parts of the accessories.
25. Do not process food at a temperature exceeding about 80°C. Foodstuffs should not be too hot, as splattering contents may cause scalding.
26. Do not wind the power cord around the appliance; this will reduce its life.
27. This appliance has a polarized plug (one blade is wider than another). To reduce the risk of electric shock, this plug will fit only one way into a polarized outlet. If the plug does not completely fit in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.
28. If the supply cord is damaged, it must be replaced by the manufacturer or an authorized service agent or a qualified technician in order to avoid a hazard.
29. The appliance cannot be used for chopping ice or blending hard and dry substance, otherwise the blade could be blunted.
30. To reduce the risk of injury, never place cutting blade on base without first putting bowl properly in place.
31. The use of accessory not recommended by the manufacturer may cause injuries to persons.
32. Always remove the blade assembly before pouring contents from cup.

SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY

Parts & Accessories

The hand blender consists of the following main parts:

• 1. SPEED DIAL: Adjusts the blending speed from 1 to 12.
• 2. POWER BUTTON: Press and hold to use the Immersion Hand Blender. Release button to stop blending.
• 3. TURBO BUTTON: Press and hold to use maximum power. Release button to stop blending.
• 4. MAIN BODY: The main unit containing the motor.
• 5. BLENDER STICK COLLAR: Connects the blender stick to the main body.
• 6. BLENDER STICK: The part with the blades that goes into the food.

Diagram Description: A line drawing illustrates the hand blender. The main body houses the controls (speed dial, power button, turbo button). The blender stick attaches to the main body via a collar. The bottom of the blender stick features the blade assembly.

Technical Data

Package Contents

Using Your Immersion Hand Blender

Before the first use, clean the blender according to the section of "Quick cleaning".

The maximum operation time should be less than 1 minute each time, and a 30-minute rest time must be maintained after 5 consecutive cycles (one minute of work and one minute of stop is one cycle).

⚠️ Sharp blade on BLENDER STICK! Handle with extreme care.

Immersion Hand Blender Controls

1. SPEED DIAL: Adjusts the blending speed from 1 to 12 (With the POWER BUTTON pressed).

2. POWER BUTTON: Press and hold to use the Immersion Hand Blender. To stop blending, release button.

3. TURBO BUTTON: Press and hold to use maximum power. To stop blending, release button.

Diagram Description: A close-up view of the hand blender's top section shows the speed dial (a rotating ring), the power button (often a trigger-like lever), and the turbo button (labeled "TURBO").

Operating Instruction for Blender

1. Place food into the cup. Note: When blending carrots, cut them into small pieces and put them in the cup, then add water (the ratio of carrots to water is 2:3).
2. Attach the BLENDER STICK to the MAIN BODY by lining up the indicator arrow so that it points to the unlock symbol. Rotate BLENDER STICK COLLAR clockwise until the arrow lock symbol is engaged.
3. Plug the Power Cord into the power outlet.
4. Lower the blender into the food. Then press and hold the low speed button or high speed button to start operating.
5. To stop the blender, release the low speed button or high speed button.
6. To remove, rotate the BLENDER STICK COLLAR counterclockwise until the unlock symbol is aligned with the arrow on the MAIN BODY.
7. When stirring food in non-standard containers (such as pots or glass bowls, etc.), the knife head can not be exposed to the level of the liquid, otherwise the food liquid will splash.

Diagram Description: Two scenarios are shown. The first depicts the blender head submerged too deeply in a bowl, with a "SPLASH" (❌) symbol. The second shows the blender head at the correct level, with a "NO SPLASH" (✔️) symbol. A note clarifies these are for demonstration purposes.

Recommended Use Chart

Refer to the table below for guidance on recommended use for different food types.

Processing Guide (for 700ml Beaker)

This guide provides recommended settings for various food processing tasks.

Cleaning and Maintenance

NOTE: Do not immerse the MAIN BODY in water.

NOTE: Do not immerse the detachable stem of the blender in water because overtime the lubrication on the bearings may wash away.

This appliance requires little maintenance. It contains no user serviceable parts. Do not try to repair it yourself. Contact the Customer Service Department for any unusual issues you may experience.

1. Always unplug the Immersion Hand Blender before cleaning.
2. Ensure the Immersion Hand Blender has cooled down before cleaning.
3. Be very careful when cleaning BLENDER STICK blades; the blades are very sharp ?.
4. To clean MAIN BODY, wipe down with a clean, damp cloth and dry thoroughly after every use. Never submerge in water or other liquids. DO NOT place BLENDER STICK COLLAR in water.
5. Never use harsh chemical detergents, powder or scouring pads on any of the parts.
6. To clean all detachable parts and accessories, wipe with a soft cloth and a mild detergent before rinsing again. Soak in hot water for a few hours for easy cleaning. Then wipe down with a damp cloth and allow to dry.
7. Do not place the Immersion Hand Blender, or any of its attachments in the dishwasher, as this will damage internal components. Do not use abrasive cleaners.
8. Store Immersion Hand Blender in a clean, dry place.
9. Contact Customer Service for any issues or malfunctions.

Quick Cleaning

Between processing tasks, hold the hand blender in the beaker half filled with water and turn on for a few seconds.

Diagram Description: A grid shows cleaning scenarios. The first row shows a bottle (clean), a checkmark (✔️), a sink with cross (❌), and a beaker with cross (❌). The second row shows a glass with checkmark (✔️), a glass with checkmark (✔️), a sink with cross (❌), and a beaker with cross (❌). This indicates that quick cleaning in a beaker is effective, but immersing the main unit or stem in water is not.

Trouble Shootings

Warranty Claim Procedure

To ensure quick processing of your case, please observe the following instructions:

Please have the till receipt and the item number (S/N: 12345) available as proof of purchase.

You will find the item number as a sticker on the rear or bottom of the appliance.

If malfunctions or other defects occur, please contact our customer service listed either by telephone or by email.

For any further assistance, please contact us:

Customer service: customer-service@bonsenkitchen.com

Environment Friendly Disposal

Disposal:

Guideline 2012/19/EC concerning the handling, collection, recycling and disposal of electrical and electronic equipment and their components ('waste electrical and electronic equipment', known as WEEE).

The crossed symbol on a rubbish container ??️ indicates that the machine or device is not allowed to be disposed of, but must be handed over to an appropriately equipped collection point for proper recycling or disposal.

Directives:

CE: This machine corresponds to the requirements according to EU Guideline 2014/30/EU entitled 'Electro-Magnetic Compatibility' and 2014/35/EU entitled 'Low-Voltage Guidelines'.

UKCA: The product corresponds to the requirements according to UK Directive regulation technical documentation as well as the UK declaration of conformity for the required UKCA marking.

The packaging materials have been selected for their environmental friendliness and ease of disposal and are therefore recyclable. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.