LED Mobile Phone Blue Controller
APP Download
iOS and Android systems can download the "LotusLamp X" APP by scanning the QR code. Open your browser or another tool with a "Scan QR code" function and scan the "LotusLamp X" QR code below.
[QR code for LotusLamp X APP download]
After the software is successfully downloaded, click the APK to install. Upon installation, the following program icon will appear on your desktop: LotusLamp X icon.
Product Overview
The controller supports Android version 4.3 and above, and iOS version 6.0 or above. It enables remote control for turning lights on/off, adjusting brightness, color, temperature, and activating music or alarm modes. The controller offers 160,000 colors and dozens of light patterns, designed for LED lamps and modules. The remote-controlled distance can reach up to 15-20 meters indoors.
Technical Parameters
- Connection: Bluetooth 4.0 or above
- Applicable Mobile OS: iOS 6.0 or above, Android 4.3 or above
- Support Language: English, Chinese (other languages can be set according to the mobile phone system's function)
- Working Temperature: -20°C to 60°C
- Input: 4.0-6V
- Output: SPI RGB
- Remote Distance: 8-15m (indoor)
- Control Mode: Bluetooth OR IR Remote Controller
Remote Control Function
The remote control provides various functions:
| Function Category | Detail 1 | Detail 2 | Detail 3 | Detail 4 |
|---|---|---|---|---|
| Brightness/Speed/Sensitivity | brightness/speed/sensitivity | brightness/speed/sensitivity | ON | Off |
| Cycles/Modes | Rhythmic cycle | 7 color switching | Automatic cycle | |
| Mode Selection | Mode1 | Mode2 | Mode3 | Mode4 |
| Mode Selection | Mode5 | Mode6 | Mode7 | Mode8 |
| Timed Shutdown | Timed shutdown 1H | Timed shutdown 2H | Timed shutdown 4H | Timed shutdown 8H |
| Musical Rhythm | Musical rhythm 1/2 | Musical rhythm 3/4 | Musical rhythm 5/6 | Musical rhythm 7/8 |
Regulatory Compliance
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
ISED Statement
English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure. Users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
(Note: French regulatory statements are also present in the original document.)
