User Manual for Shenzhen models including: WM500X1 Wireless microphone, Wireless microphone
ShenZhen Quandao Technology Co.,Ltd. WM500X1 Wireless microphone 2AWQ3-WM500X1 2AWQ3WM500X1 wm500x1
File Info : application/pdf, 2 Pages, 483.80KB
DocumentDocumentYC-WM500X1 series wireless microphone Product instructions Foreword: Thank you for using our wireless microphone products. This product is specially designed for the needs of mobile recording. Intelligent working mode. The transmitter and receiver automatically connect wirelessly without complicated settings The appearance is simple and light, easy to carry and install, and can be widely used in short video shooting , live video Teaching training and other wireless sound transmission fields. The product adopts UHF wireless digital encrypted communication technology, and its excellent design ensures safe and reliable operation during use. This series includes the following models: YC-WM500X1:3.5MM interface with a wireless microphone and one transmitter. YC-WM500X2:3.5MM interface: one drag and two wireless microphones, equipped with two emitters. YC-WM500C1: type-c interface with a wireless meter wind, equipped with one transmitter. YC-WM500C2: type-c interface one drag two wireless microphonesequipped with two emitters. YC-WM500A2: two wireless microphones are equipped with one lighting interface and two YC-WM500A2: two wireless microphones are equipped with one lighting interface and two transmitters. YC- WM500XCA: Configure a transmitter with 3.5MM, TYPE-C, and LIGHTING interfaces, one microphone and three microphones. (1) Product function description: 1. WM500TX Universal Transmitter Description of each function of the transmitter: Charging indicator, bright red when charging, bright blue when fully charged Charging indicator, bright red when charging, bright blue when fully charged Power switch, press and hold for 1 second to turn on or off: short press the display to enter the volume interface, and the channel buttonadjustable volume level Power switch, press and hold for 1 second to turn on or off: short press the display to enter the volume interface, and the channel buttonadjustable volume level Information display Environment Noise Reduction Switch, press to ON to turn on noise reduction Microphone plug into socket Transmitting antenna YC-WM500X1 series wireless microphone Product instructions 2. YC.WM5QQRX receiver. (3.5MM interface). Description of cach function of the transmitter DC- 5V charging. input socket, the input specifications are: DC5V / 0.5-2A Power switch LINE OUT audio output socket Charging. indicator, bright red when charging... bright blue when fully charged Headphone output socket Power- on indicator Information indicator: Blinks when battery is low: Lights up blue when A channel transmitter is connected, and lights red when B channel transmitter is connected Receive antenna Cold shoe connector for mounting on the shoe mount of a camera or mount 3.YC-WM500C receiver (TYPE-C interface) Description of each function of the transmitter: TYPE-C connector Work indicator: This indicator is on when the smart device is connected Connection indicator: light blue when A channel transm itter is connected, red when B channel transm itter is connected; purple when AB transmitter is connected at the same time Microphone Raidio Indicator: Dynamically indicates the radio status of the microphone YC-WM500X1 series wireless microphone Product instructions 4.YC-WM500X1. receiver. (LIGHTING intertace). Description of each function of the transmitter: Charging. status indicator: bright red when charging, bright blue. when fully charged LGHTING connector. Pawer switch, set to ".ON". to .tur.n on. Power-on indicator, on after power on Information indicator: flashes when the battery is low; light blue when A chan nel transm itter is connected, red when B channel transm itter is connected; purple when AB transmitter is connected at the same time Microphone radio indicator: dynamically indicate the radio status of the. microphone (2) Main features: 1. UHF band digital wireless communication technology, stable and reliable work. 2. Preset 20 channels .tor. selectiQn. 3. The transmitter;can adjust the microphone volume for a wider range of applications. 4. The. .transmitter.has a WNCR acoustic .ngise reduction switch, which can significantly... reduce ambient low frequency noise and wind noise. 5. Excellent ADC /DAC digita! signal processor, providing high- quality audio ettects. (3) Technical Parameters: Wireless frequency range: 499- 510MHz Modulation: DQPSK Audio frequency. response. 30 Hz- 18kHz Microphone Specifications: Capacitive Omni Number of channels: 11 (a total of 11 channels in 5 groups, 4 channels in each group, and the replaceable channel group is configured by the ID code) Wireless transmitting power:10mW Signal to noise ratio:90dB Receiver plug type: 3. 5MM socket (YC- WM500RX); USB -C data plug (YC-WM500C); LIGHTING data plug (YC-WM500A) Transmitter power: DC3.7V (built-in polymer lithium battery), or DC-5V / 0.5-2A external power Input Transmitter charging input specification: DC-5V / 0.5-2A Transmitter battery charging time: 2-4 hours Transmitter battery life: 6-8 hours Receiver power: DC3. 7V, built-in lithium polymer battery (YC -WM500RX); Receiver power: powered by USB- C socket device (YC-WM500C); Receiver power: DC3. 7V, built-in lithium polymer battery (YC -WM500A); Receiver battery life: about 6 hours (YC-WM500RX); Receiver battery life: about 4 hours (YC- WM500A1); Receiver battery life: about 2 hours (YC-WM500A2); Transmitter and receiver power consumption: <1W (micropower)kHz YC-WM500X1 series wireless microphone Product instructions YC-WM500X1 series wireless microphone Product instructions Reference use distance: 3 0- 50 meters (there may be differences according to the environmental electromagnetic wave conditions) Operating temperature: 0 °C to 55 °C Storage temperature: -20 °C to +55 °C Product specifications : YC-WM500TX universal transmitter: 73 (length) * 40 (width) * 14 (thickness) mm; YC- WM50ORX receiver: 73 (length) * 40 (width) * 14 (thickness) mm; YC-WM500C receiver: 72 (length)15 (width) * 10 (thickness) mm; YCWM500A receiver: 75 (length)24 (width) * 12 (thickness) mm; Unit weight : YC-WM500TX universal transmitter: 40 grams; YC-WM500RX receiver: 40 grams; YCWM500C receiver: 8 grams; YC - WM500A receiver: 15 grams; (4) Packaging configuration: VLOG GO 3U (TYPE-C interface one for one): VLOG GO VT transmitter x1, VLOG GO 3UR receiver X1, lavalier microphone X1, charging cable ....... instruction manual X1. VLOG GO 3US (TYPE-C interface one for two): VLOG GO VT. trainsmitter x2. VLOG GO 3UR receiver X1. lavalier microphone X2, charging .cable X2. instruction manual X1. VLOG GO 3L (onie for one. lighting. interface): VLOG GO VT transmitter x1. VLOG GO 3LR receiver. X1. lavalier. microphone X1, charging cable X2, instruction manual X1. VLOG GO 3LS (one for two lighting interface): VLOG GO VI transmitter.x2. VLOG GO.3LR receiver. X1. lavaliermicrophone X2. charging. cable X3.. instruction manual X1. YC-WM500X1 (3 .5MM interface one for one): YC-WM500TX universal transmitter x1. YC _W lier microphone X1, charging cable X2, cYaCm-WerMa a5u0d0iXo2c(a3b.5leMXM1,Minotberilfeacpehoonnee efoxtretnwsioo)n: cable X1, instruction manual X1. YC-WM500TX universal transmitter x2, YC-WM500RX receiver X1. lavalier microphone X2, charging cable X3, camera audio cable X1,Mobile phone extension cable X1, instruction manual X1. (5) Using YC-WM500X1 / YC- WM500X2: 1. Insert the microphone into the 4MICV socket of the transmitter, pay attention to the position and lock it firmly. 2. Plug. the audio cable into the receiver's "LINE OUT" jack. Use the other end of the audio cable to connect to a recording device. 3. Turn. on .the. power. .of. the. .transmitter. and. .receiver. through. the side. power. .button, and the receive.. can connect to the transmitter to work.Ilf it cannot be connected, press and hold the transmitter's power button and the setting button at the same time for 3 seconds while the transmitter is off, the transmitter display will start Blink (enter ID pairing mode), then power on the receiver, wait 3 seconds, then power off and restart the transmitter and receiver. 4. If you encounter interference with other wireless signals during use and the use distance is significantly shorter, you only need to operate the transmitter' s setting key to change the channel, and the receiver automatically tracks the connection. 5.If multiple sets are used at the same time, please configure the transmitter and receiver as follows: Step 1: Turn off .the first transmitter and receiver. Do not turn on the power. (The first set does not need to be set) Step 2: Press and hold the power button and the setting button of the second set of transmitters simultaneously for 3 seconds while the transmitter is off. The display of the transmitter will start to flash (enter into the ID pairing mode). Automatically connect the second set of transmitters and reconfigure the ID code within 3 seconds after booting, and then turn off the second set of transmitters and receivers. Step 3: Press and hold the power button and the setting button of the third set of transmitters simultaneously for 3 seconds while the transmitter is off. The display of the transmitter will start: blinking (enter the ID pairing mode). Automatically connect the third set of transmitters and reconfigure the ID code within 3 seconds after powering on, and then turn off the third set of transmitters and receivers. |f you need to continue to increase the number of use, repeat the above operation. After configuration, you can start using it normally. Be careful not to have the same frequency. If there is the same frequency,you can adjust it by the transmitter setting button. (6) Using YC-WM500C1 / YC-WM500C2: (1) Insert the microphone plug into the "MIC" socket of the. transmitter, pay, attention to its place, and lock it firmly. (2) Install the receiver on a smart device (smartphone, tablet, laptop, etc.). After the receiver and the smart device are successfully connected, the receiver's work indicator turns on; if the receiver's work indicator does not turn on, it indicates that the connection to the smart device was unsuccessful. Please check the settings of the smart device. Some models of mobile phones need to turn on the OTG function by setting --- more settings --- OTG switch; some models of mobile phones need to upgrade the system to the latest version. Computer equipment may need to be connected through a TYPE-C to USB-A conversion plug. (3)Press the power button to turn on the power of the transmitter, and the receiver can connect to the transmitter to work. If it cannot be connected, press and hold the transmitter 'S power button and the setting button for 3 seconds at the same time when the transmitter is off, the transmitter display will start to flash (enter ID Pairing mode), then plug the receiver into the smart device,wait 3 seconds, then turn the transmitter off and then on again. (4) The transm itter can adjust the volume of the microphone. When the transmitter is on, press the power button once, the display will enter the volume interface, sO you can adjust the volume through the channel buttons. The volume can be adjusted from U00 ... U10 in 11 levels. U10 Is the maximum volume. (5) If the, use. distance is significantly shorter, it may be. interfered by other wireless signals, please. chan ge the chan nel by the transm itter 's setting key and try to solve it. (6) If mu ltiple sets are used at the sam e tim e, plea se configure the transm itter. and receiver as follow s: Step 1: Turn off the first transm itter and receiver. YC-WM500X1 series wireless microphone Product instructions Step 2: Press and hold the power button and the setting. button of the second set of transmitters simultaneously for 3 seconds while the transmitter is off. The display of the transmitter will start to flash (enter the ID pairing mode). Automatically connect the second transmitter and reconfigure the ID code within 3 seconds, and then turn off the second transmitter and receiver. Step 3: Press and hold the power button and the set button of the third transmitter simultaneously for 3 seconds while the transmitter is off. The transmitter display will start to flash (enter the ID pairing mode). Automatically connect the third transmitter and reconfigure the ID code within seconds,and then turn off the third transmitter and receiver. lf you need to continue to increase the number of use, repeat the above operation. After configuration, you can use it normally after you turn it on again. Be careful not to have the same frequency. If there is the same frequency, you can adjust it with the transmitter setting key. (7)Using YC-WM500A1 / YC- WM500A2: 1. Insert the microphone into the 4MICV socket of the transmitter, pay attention to the position and lock it firmly. 2. Turn on the receiver power switch, the receiver power indicator is on, and then install the receiver on a smart device (smartphone, tablet). 3. Turn on the power of the transmitter through the power button, and the receiver can connect to the transmitter to work. If it cannot be connected, press and hold the power button and the setting button of the transmitter for 3 seconds at the same time when the transmitter is off. (Enter ID pairing mode), then turn on the power of the receiver, wait 3 seconds, then turn off the transmitter 3 and then turn it on again 4. The transm itter can adjust the volume of the microphone. When the transm itter is on, press the power button once, the display will enter the volume interface, SO you can adjust the volume through the channel buttons. The volume can be adjusted from U00--U10 in 11 levels. U10 Is the maximum volume. 5. If the use distance is significantly shorter, it may be interfered by other wireless signals, please change the channel by the transmitter 's setting key and try to solve it. 6S.tIefpm1u: ltiple Turn sets are used at the sam e tim e, plea se off the first transmitter and receiver. configure the tra n s m it te r and receiver as follows: Step 2: Press and hold the power button and the setting button of the second set of transmitters simultaneously for 3 seconds while the transmitter is off. The display of the transmitter will start to flash (enter the ID pairing mode). Automatically connect the second transmitter and reconfigure the ID code within 3 seconds, and then turn off the second transmitter and receiver. Step 3: Press and hold the power button and the set button of the third transm itter sim ulta neously for__ 3 secon ds while the transm itter is off. The transm itter displa y will start to flash (enter the ID pairing mode). Automatically connect the third transmitter and reconfigure the ID code within seconds, and then turn off the third transmitter and receiver. lf you need to continue to increase the number of use, repeat the above operation. After configuration, you can use it normally after you turn it on again. Be careful not to have the same frequency. If there is the same frequency, you can adjust it with the transmitter setting key. YC-WM500X1 series wireless microphone Product instructions () Troubleshooting The receiver is disconnected and the transmitter cannot be connected Sound is distorted when speaking loudly Silent/Very Low Short wireless range Short battery life Wind noise Cell phone interference noise Other interference noise (9) Matters needing attention The distan ce is beyond th e ran ge of use, please shorten th e ran ge of use; if th e shielding distan ce is reduced accordin gly May be interfered, please adjust the tran smitter setting key to change th e working chann e Reconfigure th e tran smitter and receiver con nec tions: With th e transmitter off, press and hold After 3 sec on ds of the source button and th e setting button, th e tran smitter display flashes, th en turn th e receiver on and insert th e smart deviceStan dby, wait 3 sec on ds, th er turn off and restart th e tran smitter Lavalier microphone is a high- sensitivity pickup, please adju st th e distan ce between the microphone and the sound source . Adjust th e volu me of th e transmitter. Lowerin g th e volume will reduce the distortion . Check th at the mic rophone plug of the tran smitter is fully inserted into the socket Chec k the microphone volume an d permission settings of th e smart device Ch ec k . wheth er th e volume. of th e tran smitter is at the minimum, and increase th e volume. of th e transmitter. The tran smitter an d receiver are bloc ked by the bu ilding, which will affect th e use distan ce Transmitter and receiver antenn as should not be covered by objects as much as possible to facilitate sign al tran smission In a crowded environ men t, th e human body attenuates rad io waves, so that th e tran smission and reception are not bloc ked by th e crowd as much as possible May be interfered, please change th e chann el of th e tran smitter When two transmitters are close together, th e use distan ce will be reduced; please keep a distan ce of at least 0.5 meters Use outside th e temperature range in the techn ical parameters will affect the performan ce of the lithium battery: The battery performan ce will decrease after th e number of charging cyc les exceeds 500 times, please con tac t th e dealer / manufacturer to replace the new battery Whether th e windproof cotton cover of th e mic rophone is installed Do not use th e microphone in a windward location or in front of a fan Turn . on th e. tran smitter's noise. redu ction. switch. to. reduce. wind. and. environ men tal noise. When recordin g with your phone, set your phone to Airplane mode an d tr y to fix When charging, it may be affected by th e grid signal an d gen erate noise Noise cau sed by interferenc e from other radio equipment, please change the itran smitter chann el and trv to solve it Interference from high - power electrical equ ipment, such as electromagnetic stoves, mic rowave ovens, power distribution boxes, etc ., please stay away from th ese equipment When using it close to th e computer or 220V wire, it may be intruded into th e grid an d interfere with noise. 1. This product is a precision electronic device. It should be protected from rain or heavy drops. If the product enter the water by accident, please dry it immediately and have it handled by a professional technician. 2. The transm itter has a built-in rechargeable lithium battery. When not in use for a long time, the battery should be fully charged every three months to maintain battery performance. 3. When installing and removing the receiver, point it straight at the socket of the smart device and do not bend the receiver excessively in a non-straight line to avoid damage to the plug. 4.The receiver has a built-in data chip, and it is normal to have a certain temperature rise during operation. The pictures used in this manual are only used to describe the operation and use of the product. Please refer to the actual product for the actual appearance. The company reserves the right to improve products and product program software, product works and materials without prior notice. Version; V1.0-2019-11 FCC Statement 1.This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit differ ent from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Shenzhen Quandao Technology Co.,Ltd. Office: Room 701, Mingjun business center, Dalang street, Longhua Town, Shenzhen,Guangdong, P.R.China Email: 1660176606@qq.comWPS 文字