Niko Home Control Ventilation Control with LED, Piano Black Coated
Product Code: 200-52054
This push-button allows you to set four ventilation positions. It is mounted on the wall plate using a click mechanism. An LED indicates the ventilation position. Mechanism with touch button. Finish: piano black coated.
Technical Data
Ventilation control with LED for Niko Home Control, piano black coated finish.
- Cover Material: The cover is made of polycarbonate + ASA, which is non-degradable and lacquered.
- Engraving: In the bottom right corner, a clock is engraved on the button to indicate the boost function. A fan is engraved on the other three buttons, with the speed increasing counter-clockwise, starting from the top-left button.
- LED Indicator: The lower and upper buttons are equipped with an amber LED indicator (1.5 x 1.5 mm) that shows the status of the action. LEDs can be programmed to light up when the output is active or inactive via the programming software.
- Color: Bakelite®-look piano black coated (approximately NCS S 9000 N, RAL 9005). Bakelite® is a registered trademark of Hexion GmbH.
- Fire Safety:
- Plastic parts of the cover are self-extinguishing (satisfy a 650 °C glow-wire test).
- Plastic parts of the cover are halogen-free.
- Power Supply Voltage: 26 Vdc (SELV, Safety Extra Low Voltage).
- Disassembly: Disassembly is simple by detaching the cover from the base.
- Impact Resistance: After installation, IK06 impact protection is guaranteed.
- Dimensions (HxWxD): 44.5 x 44.5 x 8.6 mm
- Marking: CE
Warranty: 4 years
Website: www.niko.eu