Envoltage 2400W Power Station User Manual
Model: 2400W
Introduction
Welcome to the Envoltage 2400W Power Station. This portable power solution provides reliable energy for your devices, whether you are camping, working outdoors, or experiencing a power outage. Please read this manual carefully to ensure safe and efficient operation.
Important Safety Information
WARNING: Read all instructions and safety warnings before using this product.
- Electrical Hazard: Do not expose the unit to water or moisture. Do not operate with wet hands.
- Battery Safety: Do not disassemble or puncture the battery. Avoid extreme temperatures.
- Ventilation: Ensure adequate ventilation during operation and charging. Do not block vents.
- Usage: Only use the provided AC adapter and cables. Do not overload the unit beyond its rated capacity.
- Disposal: Dispose of the unit and battery according to local regulations.
Product Overview
The Envoltage 2400W Power Station is designed for versatility and ease of use. It features multiple output ports and input options.
Component Description
Front Panel:
- LED Display: Shows battery percentage, input/output wattage, and status indicators.
- Main Power Button: Press and hold to turn the unit on/off. Short press to toggle AC output.
- Frequency Setting Button: Press and hold to enter frequency setting mode.
- AC Outlets (x3): Standard household outlets for powering AC devices.
- USB-A Ports (x2): For charging smartphones, tablets, and other USB devices.
- USB-C PD Port (x1): High-speed charging for compatible devices.
- DC Car Port (x1): For powering car accessories.
Rear Panel:
- AC Input Port: For charging the power station from a wall outlet using the included adapter.
- Solar Input Ports (x2): Connect compatible solar panels for recharging (MPPT compatible).
Top/Sides:
- Carrying Handle: For easy portability.
- Ventilation Grilles: Ensure airflow to prevent overheating.
Diagram Description: The front panel is dominated by an LED display showing operational status. Adjacent to the display are the main power button and a frequency setting button. Below these are three AC outlets, two USB-A ports, one USB-C Power Delivery port, and a DC car port. The rear panel contains the AC input port and two ports for connecting solar panels. The unit is equipped with a sturdy carrying handle on top and ventilation grilles on the sides and rear.
Operation
Powering On and Off
To turn the power station on, press and hold the Main Power Button for approximately 3 seconds. The LED display will illuminate. To turn it off, press and hold the Main Power Button again for approximately 3 seconds.
Setting the Frequency
To set the operating frequency (e.g., 50Hz or 60Hz), long press the Main Power Button. The display will show "SUC" if the setting is successful. Long press the Main Power Button again to exit the frequency setting mode.
Charging the Power Station
AC Charging: Connect the included AC adapter to the AC Input Port on the rear panel and plug it into a wall outlet. The unit will begin charging, indicated on the LED display.
Solar Charging: Connect compatible solar panels (sold separately) to the Solar Input Ports. Ensure the solar panels are rated for the correct voltage and current. The unit supports MPPT charging for optimal solar input.
Discharging (Using the Power Station)
AC Output: Short press the Main Power Button to activate the AC outlets. Connect your AC devices to the outlets. The LED display will show the AC output wattage. Press the Main Power Button again to turn off the AC output.
DC and USB Output: The DC Car Port and USB ports (USB-A and USB-C) are active whenever the power station is turned on. Connect your DC and USB devices directly to the respective ports.
Battery Management
The LED display provides real-time information on the battery level and power flow. When the battery level is low, recharge the unit promptly.
Maintenance and Care
- Keep the unit clean by wiping it with a dry, soft cloth.
- Ensure ventilation grilles are free from dust and debris.
- Store the power station in a cool, dry place.
- For long-term storage, charge the battery to around 50-60% every 3-6 months to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | Battery is depleted. | Charge the unit using the AC adapter or solar panels. |
| No output from AC ports | AC output is turned off. | Short press the Main Power Button to activate AC output. |
| Unit shuts down during use | Overload protection activated. | Disconnect devices and reduce the total load. Ensure the load is within the unit's rated capacity. |
| Unit not charging | Faulty AC adapter or solar panel connection. | Check connections. Try a different wall outlet. Ensure solar panels are correctly connected and receiving sunlight. |
Specifications
General:
- Capacity: 2000Wh (typical)
- Battery Type: Lithium Iron Phosphate (LiFePO4)
- Lifecycles: 3000+ cycles to 80% capacity
Output:
- AC Output (x3): 2400W Continuous, 4800W Peak, 120V~60Hz (or 230V~50Hz, depending on setting)
- USB-A: 5V/2.4A (x2)
- USB-C PD: 100W Max
- DC Car Port: 12V/10A Max
Input:
- AC Input: 1200W Max
- Solar Input: 10-50V, 10A Max, 500W Max (MPPT)
Operating Temperature: -10°C to 45°C (14°F to 113°F)
Dimensions: [Approximate dimensions, e.g., 40cm x 25cm x 30cm]
Weight: [Approximate weight, e.g., 20kg]
Warranty
Envoltage offers a limited warranty on its power stations. Please refer to the warranty card included with your product or visit the Envoltage website for full details.