Rittal EB40 Busbar Bending Machine

Faster - better - everywhere.

Overview

For businesses looking to take busbar modification in-house, the EB40 from Rittal Automation Systems (RAS) is an excellent entry point. By combining robust design with compactness, this machine easily bends busbar with outstanding accuracy and versatility. Now, panel builders and power distribution suppliers can take busbar modification into their own hands for excellent production gains and a high ROI.

What Can the EB40 Provide for You?

Versatile, in-house busbar bending in any configuration, including flat, offset, edge, twist, and U bends
Excellent return on investment with less waste thanks to precise operation
Consistent repeatability with a reliable accuracy of ± 0.2°
Quick and easy tool changes thanks to user-friendly plug-in system
Quiet, precise hydraulic operation and a compact, robust design
Minimized downtime via remote maintenance capabilities

Note: EHRT and its machines are owned by Rittal and sold under Rittal Automation Systems.

Technical Specifications

Specification	EB40
Weight	1700 kg / 3747.86 lbs
Length	1615 mm / 63.6 inch
Width	3550 mm / 139.75 inch
Height	1870 mm / 73.6 inch
Working height	900 mm / 35.4 inch
Temperature	15 – 35°C / 59° - 95°F (without air condition)
Max. relative humidity	60%
Bending drive	Hydraulic
Hydraulic oil	301
Bending power	344 kN
Max. pressure	280 bar
Max. stroke	200 mm / 7.87 inch
Max. stroke velocity	21 mm/s / 0.83 inch/s (60 Hz)
Bending accuracy	0.2°
Side stop Length	1500 or 2000 mm / 59 or 78.7 inch
Speed	250 mm/s / 9.8 inch/s

Work piece dimensions

Flat bend

Thickness: 3 – 20 mm / 0.12 – 0.78 inch
Width: 15 – 200 mm / 0.6 – 7.87 inch
Length*: from 40 mm / 1.6 inch

Edge bend

Thickness: 3 – 10 mm / 0.12 – 0.39 inch
Width: 20 – 120 mm / 0.78 – 4.7 inch
Length*: from 40 mm / 1.6 inch

Offset bend

Thickness: 3 – 15 mm / 0.12 – 0.6 inch
Width: 15 – 160 mm / 0.6 – 6.3 inch
Length*: from 40 mm / 1.6 inch

* The maximum possible part length is above all depending on the length of the side stop and the position of the bends. The machine can also be operated without a side stop (stop folded away).

Machine Control and Operation

Specification	Details
Control	Beckhoff TwinCAT
Machine PC	Beckhoff CX-5130
Processor	Intel Atom E3827, 1.75 GHz
Memory	RAM: 4 GB DDR3, HDD: 40 GB CFAST FLASH
Interfaces	2 x RJ45 10/100/1000 Mbit/s, 4 x USB 2.0, 1 x DVI-I
Operating system	Windows 10 IoT
Operating software	EHRT PowerBend (PowerCut)
User interface	Touchscreen, keyboard and buttons
Electrical connection	UL
Voltage	460 V AC ± 5%
Frequency	60 Hz ± 1%
Electrical fuse protection	15 A
Electrical supply	3 phases, GND
Noise emission	< 82 dB(A)
Operating time	80% (Single shift)