Installation Guide for HANECO models including: FOCI24W-B, FOCI24W-W, FOCI35W-B, FOCI35W-W, FOCI24W-B FOCIG2 Series LED Track Spotlight, FOCI24W-B FOCIG2 Series, LED Track Spotlight, Track Spotlight, Spotlight
File Info : application/pdf, 2 Pages, 1.53MB
DocumentDocumentHANECO LED TRACK SPOTLIGHT INSTALLATION GUIDE FOCIG2 Please read these installation instructions carefully before installing or maintaining this equipment. The product is designed for installation and maintenance in accordance with relevant Australian standards (AS/NZS3000), by an authorised and licensed electrician. The installation instructions were correct at the time of print. To reflect changes in technology and Australian and New Zealand standards; Haneco reserves the right to amend the instructions without notice. Updated guidelines can be found on relevant brand web site. PRODUCT NAME: FOCIG2 LED Track Spotlight Issue Date: 11/11/2024 Product code Power CCT Electrical Classification IP rating CRI Flicker-free Driver Nominal voltage & Frequency Power factor Surge protection rating Inrush current Rated operating ambient temperature Electrical connection Installation type Warranty FOCI24W-B / FOCI24W-W FOCI35W-B / FOCI35W-W 12 W, 15 W, 20 W, 24 W 24 W, 28 W, 31 W, 35 W 2700 / 3000 / 4000 K Class II IP20 > 90 Yes Integral 220-240Vac,50/60Hz > 0.9 Overload / Short Circuit 24A @ 6.5uS 26A @ 6.5uS -20 to 35°C* *Luminaire is only to be installed outside arms reach Universal 3 Circuit Track Universal Track 5 yrs Line diagrams and dimensions 165 mm 184 mm Ø72 mm FOCI24W-B FOCI24W-W Ø80 mm FOCI35W-B FOCI35W-W For more information www.haneco.com.au 1300 001 LED Installation 1 LOCK LEVER Fitting Code: FOCI24W-B FOCI35W-B FOCI24W-W FOCI35W-W IMPORTANT INFORMATION Read before installation Before installation, make sure the contact points are retracted fully inside the head of the track light using the locking lever. Then, insert the head fully into the track. It's important that the luminaire has the correct orientation. Ensure that the ridges on the top of the unit are on the opposite side of the ridge which protrudes from one side of the track. The unit should fit so that it is secured square to the track and does not wobble once the locking lever is engaged. 3 2 355° 2700K 3000K 4000K Adjust the light source's colour temperature by turning the dial switch. 90° 24°-60° A After fully inserting the head of the track light into the track, pull the lever (A) in the direction indicated by the arrow to engage the contact point into the track bus. Rotate the guide track head of the light, aligning the numbers on the dial with the corresponding circuit. Rotate the track light head dial to adjust the power of the light. Adjust the colour temperature of the light source using the dial switch. Power setting 1 2 3 4 FOCI24W-B FOCI24W-W 12 W 15 W 20 W 24 W FOCI35W-B FOCI35W-W 24 W 28 W 31 W 35 W