mailto:haws@hawsco.com
Bottle Fillers Drinking Fountains & Safety Equipment | HawsWarranty - Haws Co
Instruction Manual for Haws models including: 1119FR Drinking Fountain, 1119FR, Drinking Fountain, Fountain
HAWS warrants that all of its products are guaranteed against defective ... 6700.4 MOUNTING PLATE. 2X. SUPPLY. 50mm. 2". WASTE. WASTE. 708mm. *27-7/8". 565mm.
File Info : application/pdf, 4 Pages, 220.04KB
DocumentDocumentINSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: haws@hawsco.com website: www.hawsco.com No. 0002076627 (15) Model 1119FR Drinking Fountain NOTE TO INSTALLER: Please leave this information with the Maintenance Department. LIMITED WARRANTY HAWS warrants that all of its products are guaranteed against defective material or poor workmanship f or a period of one year from the date of shipment. The f oregoing notwithstanding, HAWS warrants certain specific products or components thereof for an adjusted period. A list of t hes e ex cept ed p ro duct s and components and a description of their respective warranty terms may be f ound here: www.hawsco.com/warranty. HAWS' liability under this warranty shall be discharged by furnishing wit hout charge F.O.B. HAWS f actory any goods, or part thereof , which shall appear to the Company upon inspection to be of defective material or not of first-class workmanship, provided that a c laim is made in writing to Company within a reasonable period after receipt of the product. Where claims f or d ef ect s are made, the defective part or parts shall be delivered to the Company, prepaid, for inspection. HA WS s hall not be liable for the cost of repairs, alterations or replacements, or the labor required to implement t hem, or f or any expense connected therewith made by the owner or owner's agents, except upon written authority f rom HAWS. HAWS shall not be liable f or any damages caused by defective mat erials or p oor workmanship, except for replacements, as provided above. Buyer agrees that HAWS has made no o ther warranties either express or implied in addition to those above stated, except that of title wit h res p ect t o any of the products or equipment sold hereunder and that HAWS shall not be liable for general, s pec ial , incidental, or consequential damages claimed to arise under the contract of sale. Equipment manufactured by HAWS is warranted to function if installation and maintenanc e inst ruct ions provided are adhered to. The units also must be used for the purpose for which they were int end ed. A ny HAWS emergency equipment is intended to supplement f irst-aid treatment. Due to widely varying conditions, HAWS cannot guarantee that the use of this emergency equipment will prevent serious injury or the aggravation of existing or prior injuries. EXCEPT AS EXPRESSLY STATED HEREIN, HAWS HEREBY DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY MAY NOT BE MODIFIED OR EXTENDED WITHOUT THE WRITTEN CONSENT OF HAWS. REMEDIES AND REPLACEMENTS STATED HEREIN ARE EXCLUSIVE. IN NO EVENT SHALL HAWS BE LIABLE FOR ANY SPECIAL, PUNITIVE, CONSEQUENTIAL OR INCIDENTAL DAMAGES TO ANY PERSON INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF USE OR PROFITS, SUBSTITUTE PRODUCTS OR COSTS, PROPERTY DAMAGE, OR OTHER MONETARY LOSS. SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS MODEL PLEASE CALL: TECHNICAL SUPPORT: 1-800-766-5612 FOR CUSTOMER SERVICE: 1-888-640-4297 05/22 Model 1119FR Page 1 of 4 RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12" adjustable wrench, 10" pipe wrench, 5/64" hex key wrench, 9/16", 1/2", 7/16" socket wrench or open end wrench. LOCATION OF UNIT: The Model 1119FR Drinking Fountain is a wheelchair accessible drinking water facility. The height dimensions that are shown meet current ADA requirements. When installing this unit, local, state or federal codes should be adhered to. If height other than shown is required, then dimensions must be adjusted accordingly. SUPPLY LINE: The minimum recommended line size is 1/2" IPS with 30-90 psi (2-6 ATM) pressure. Where sediment or mineral content is a problem, an inlet filter is recommended. PLUMBING CONNECTIONS: Waste outlet is 1-1/4" NPT (located on 6521FR Valve box). MAINTENANCE: Refer to 6521FR operation and maintenance sheet for more information. T ROUBLESHOOTING PROBLEM 1. Insufficient bubbler flow. REPAIR CHECKLIST 1a. Check that inlet screwdriver stop valve is wide open. Turn counter-clockwise. b. Verify minimum 30 psi flowing supply pressure. c. Adjust valve to increase flow. See 6521FR Valve Manual. General Notes: Before tightening nut and ferrule assembly, push tubing into fitting until it bottoms out to ensure correct engagement with O-Ring. For more information about Haws products, see our website: www.hawsco.com © 2022 Haws® Corporation All Rights Reserved HAWS® and other trademarks used in these materials are the exclusive property of Haws Corporation. 05/22 Model 1119FR Page 2 of 4 THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. PARTS BREAKDOWN 1 ** 1 ** ITEM DESCRIPTION ** 1 FREEZE RESISTANT VALVE 2 BOTTOM PLATE 1105 3 BUBBLER HEAD 5703M 4 PUSH BUTTON ASSEMBLY * 5 MOUNTING PLATE 6 BOTTOM PLATE 1109 PART NO. 6521FR PBM1105 5703M 5881PBA 6700.4 PBM1109 * OPTIONAL ** REQUIRED - SOLD SEPARATELY OR AS PART OF PRODUCT BUNDLES (E.G., 1119FR WITH TWO 6521FR'S OR 1119FR WITH 1920FR (NOT SHOWN) AND THREE 6521FR'S). 1 REMOVE INSERT WITH 5/16 HEX SOCKET (NOT SUPPLIED) 3 4 A 6 2 5* 1 ** (REF.) DETAIL A ROTATED 90° INTO VIEW DETAIL OF ITEM 3 NOTE: 1 ENSURE TUBE IS DISCONNECTED FROM "PUSH-IN" TYPE CONNECTOR ON PRESSURE REGULATOR PRIOR TO REMOVAL. APPLY A DROP OF LOCTITE 222MS ON NOZZLE THREADS PRIOR TO REASSEMBLING BACK ONTO BUBBLER HEAD. REATTACH TUBE TO "PUSH-IN" TYPE CONNECTOR ENSURING IT IS FULLY BOTTOMED OUT. 1455 KLEPPE LANE SPARKS, NEVADA 89431 (775) 359-4712 FAX (775) 359-7424 E-MAIL: HAWS@HAWSCO.COM WEBSITE: WWW.HAWSCO.COM WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER. ECN NO. REVISED PER BY ECN: 5800 FV DRAWN DATE CHKD FV 08-20-98 JS APPROVED DATE FV 07/08/22 MODEL(S) SCALE: 1:9 1119FR DRAWING TYPE: PARTS BREAKDOWN PART NUMBER 0002076627 REVISION 15 SIZE: A SHEET 1 OF 1 C 2022 Haws Corporation - All Rights Reserved PAGE 3 of 4 HAWS R and other trademarks used in these materials are the exclusive property of Haws Corporation. THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE. 2X 3" 76mm AIR LINE 2X 3" 76mm SUPPLY 7/8 INSULATED TUBING (MUST COVER ENTIRE SUPPLY TUBING, FROM BUBBLER TO FREEZE VALVE ASSEMBLY, TRIM TO FIT) 2X SUPPLY 5-1/8" 130mm 13" 330mm 18-1/2" 470mm 3/8 OD VINYL SUPPLY TUBING (CONNECT TO BUBBLER WITH SUPPILIED UNION, TRIM TO FIT) 3-1/4" 83mm 27-7/16" 697mm TO FLOOR 8" 203mm 2X 3 2X AIR LINE 2" 50mm 2X 16-1/4" 413mm 16" 406mm 32" 813mm 2X 12" 305mm 2-1/8" 54mm BACK PANEL (SUPPLIED) 2X FREEZE PROTECTED SUPPLY. BACK PANEL 6521FR FREEZE RESISTANT 1 2 VALVE ASSEMBLY (2 REQ'D.) 1" 25mm 6" 152mm 2X WASTE 2X AIR LINE 3-1/4" 83mm Ø 3/8" 9.5mm MOUNTING SLOTS MOUNTING DETAIL BACK VIEW *33-1/16" 839mm TO FLOOR 1/2" 12.7mm 6700.4 MOUNTING PLATE (OPTIONAL - SOLD SEPARATELY) 3/8 MOUNTING HARDWARE (NOT SUPPLIED) 2X 6521FR VALVE SYSTEM THIS VALVE IS REQUIRED (SOLD SEPARATELY. SEE NOTE 1 ) 2X 6521 VALVE ASSEMBLY 2X 2" 50mm ACCESS PANEL 2 2X 2" 50mm SUPPLY 2X 1-1/4" IPS WASTE (NOT SUPPLIED) *22-7/8" 581mm *17-1/4" 438mm 2X 10" 254mm 2X 1/2" IPS SUPPLY (NOT SUPPLIED) *38-5/8" 981mm 1-1/4" O.D. WASTE W/1-1/4 SLIP JOINT NUT AND WASHER (FROM DRINKING FOUNTAIN) 1-1/4 NPT (F) ELBOW TO TRAP (SUPPLIED WITH 6521 FREEZE VALVE) 1-1/4" IPS NIPPLE (NOT SUPPLIED) *27" 686mm 1-1/4" O.D. X 7 1/2 LG." WASTE ARM (SUPPLIED) SEE DETAIL A 2X 2-1/2" 64mm 4" 102mm DEPTH OF BOX WALL FACE FLOOR LINE *22-1/4" 565mm WASTE *27-7/8" 708mm WASTE *20-1/4" 514mm SUPPLY *25-7/8" 657mm SUPPLY DETAIL A NOTES: 1 THIS FOUNTAIN REQUIRES THE USE OF MODEL 6521FR FREEZE 3 MAXIMUM ADJUSTABLE RANGE IS 15° FROM RESISTANT VALVE ASSEMBLY (SOLD SEPARATELY OR AS PART OF PRODUCT BUNDLES (E.G., 1119FR WITH TWO 6521FR'S OR 1119FR WITH 1920FR (NOT SHOWN) AND THREE 6521FR'S). SEE 6521FR INSTALLATION INSTRUCTIONS FOR CONNECTION DETAILS. 2 VALVE ASSEMBLY MUST BE INSTALLED IN A WARM AREA. PROVISIONS SHOULD BE MADE TO ALLOW ACCESS TO ACCESS PANEL PARALLEL TO BACK OF WALL. 4. HOLD ROUGH-IN DIMENSIONS ± 1/4" (6.4mm). 5.*WHEN INSTALLING THIS UNIT LOCAL, STATE OR FEDERAL CODES SHOULD BE ADHERED TO. FOR INSTALLATION HEIGHTS OTHER THAN SHOWN, DIMENSIONS MARKED (*) MUST BE ADJUSTED ACCORDINGLY. ECN NO. REVISED PER BY: MODEL(S) ECN: 5800 FV DRAWN: DATE: CHK'D.: FELIX V. 6/10/98 JS APPROVED: DATE: 1119FR 1455 KLEPPE LANE SPARKS, NEVADA 89431 (775) 359-4712 FAX (775) 359-7424 E-MAIL: HAWS@HAWSCO.COM WEBSITE: WWW.HAWSCO.COM PART NUMBER 0002076627.D REVISION 15 FV 07/08/22 SCALE: 1:14.5 DRAWING TYPE: INSTALLATION SIZE: A SHEET 1 OF 1 C 2022 Haws Corporation - All Rights Reserved. HAWS R and other trademarks used in these materials are the exclusive property of Haws Corporation.